Kuryakyn 6183 Premium ISO Handlebar Grips Instruction Manual

Wstęp

Thank you for choosing Kuryakyn Premium ISO Handlebar Grips. These grips are designed to enhance comfort and style for motorcycle riders, featuring a chrome ISO handle with black grip placement to dampen handlebar vibration and provide a soft, non-slip surface. The unique recessions between grip pads allow for improved airflow, offering added relief during rides. This manual provides essential information for the proper installation, operation, and maintenance of your new grips.

Informacje dotyczące bezpieczeństwa

Always ensure your motorcycle is stable and turned off before beginning any installation. Wear appropriate safety gear, such as gloves and eye protection. If you are unsure about any step of the installation process, consult a qualified motorcycle technician. Improper installation can lead to loss of control and serious injury.

Lista części

The Kuryakyn 6183 Premium ISO Handlebar Grips package includes the following components:

• 1x Chrome Right Front and Rear Cover
• 1x Chrome Left Front and Rear Cover
• 2x ISO Sleeves (rubber grip inserts)
• Zestaw sprzętu:
  • 13x #4-40 x 3/8" Socket Head Cap Screws
  • 1x M6-1 x 40 mm Phillips Pan Head Screw
  • 2x End Caps

Notatka: The grips are designed with a clamshell mechanism that attaches over existing stock grips, making them compatible with heated grip systems.

Image: Disassembled Kuryakyn ISO Grips, showing the chrome covers, rubber sleeves, and end cap.

Wymagane narzędzia (nie dołączone)

• Hex Wrenches (for #4-40 screws)
• Phillips Screwdriver (for M6-1 screw)
• Window Cleaner (or similar lubricant)
• Zip Ties (optional, for easier assembly)
• Channel-Lock Pliers (optional, with protective towel)

Konfiguracja i instalacja

These grips are designed for installation over your existing stock handlebar grips. Compatibility includes 2006-2019 Honda Gold Wing GL1800 and 2013-2016 F6B models (F6B only accepts Throttle Boss).

1. Prepare the Stock Grips: Ensure your existing grips are clean and free of debris. Apply a small amount of window cleaner or a similar mild lubricant to the surface of the stock grips. This will aid in sliding the ISO sleeves over them.
2. Install ISO Sleeves: Carefully slide the rubber ISO sleeves over your stock grips. Ensure they are fully seated and aligned.
3. Assemble Chrome Halves: Place the two chrome halves of the Kuryakyn grip around the installed ISO sleeve. Ensure the raised rubber sections of the ISO sleeve are completely inserted into the corresponding notches in the chrome halves.
4. Secure the Halves: Use zip ties to temporarily hold the chrome halves together, ensuring they are tightly closed and aligned. This will help in aligning the screw holes. Alternatively, you may use Channel-Lock pliers with a protective towel to gently squeeze the halves together.
5. Włóż śruby: Begin inserting the #4-40 x 3/8" socket head cap screws into the designated holes. Start with a few screws to secure the halves, then proceed to install all remaining screws. Ensure not to overtighten, which could strip the threads.
6. Install End Caps: Attach the end caps using the M6-1 x 40 mm Phillips pan head screw.
7. Kontrola końcowa: Once all screws are tightened, remove any temporary zip ties. Verify that the grips are securely attached and do not rotate freely on the handlebars. Test the throttle and clutch operation to ensure smooth movement and no interference.

Image: Kuryakyn ISO Grip installed on the right handlebar of a motorcycle, showing the throttle assist.

Obraz: View of a motorcycle dashboard with Kuryakyn ISO Grips on both handlebars, providing a wider perspective of the installed product.

Instrukcja obsługi

The Kuryakyn ISO Grips are designed for enhanced riding comfort. The soft, non-slip rubber pads provide a secure grip and help to absorb vibrations from the handlebars, reducing hand fatigue on long rides. The unique recessions between the grip pads promote airflow, which can help keep hands cooler in warm weather.

For motorcycles equipped with heated grips, these ISO grips are compatible. Due to their design, it may take slightly longer for the heat to transfer through the ISO grips compared to stock grips. Adjust your heated grip settings as needed for desired warmth.

Image: Close-up of the right Kuryakyn ISO Grip, highlighting the integrated throttle assist for comfortable cruising.

Image: Close-up of the left Kuryakyn ISO Grip, illustrating its design for cable throttle control.

Konserwacja

To maintain the appearance and functionality of your Kuryakyn ISO Grips:

• Czyszczenie: Clean the chrome surfaces with a non-abrasive chrome cleaner and a soft cloth. Clean the rubber pads with mild soap and water. Avoid harsh chemicals or abrasive materials that could damage the finish.
• Kontrola: Periodically inspect the grips for any signs of wear, damage, or loose components. Ensure all screws remain tight.
• Rubber Condition: Check the rubber ISO sleeves for cracking or deterioration. While designed for durability, extreme conditions can affect rubber over time.

Rozwiązywanie problemów

• Grips feel loose after installation: Recheck all screws to ensure they are properly tightened. If the grips still feel loose, ensure the ISO sleeves are correctly seated within the chrome halves and that the halves are fully closed.
• Difficulty closing chrome halves: Ensure the rubber ISO sleeves are fully pushed onto the stock grips and that the raised rubber sections are aligned with the notches in the chrome halves. Using zip ties or gentle pressure with protected pliers can assist in bringing the halves together for screw insertion.
• Heated grips not heating sufficiently: While compatible, the ISO grips may slightly insulate the heat. Allow more time for the grips to warm up. If heating is still inadequate, verify your motorcycle's heated grip system is functioning correctly.
• Chrome flaking: In rare cases, chrome finish may flake, particularly if exposed to harsh conditions or impacts. This is typically covered under warranty. Contact Kuryakyn support for assistance.

Specyfikacje

Gwarancja i wsparcie

Kuryakyn products typically come with a one-year limited warranty against defects in materials and workmanship. For specific warranty details, claims, or technical support, please refer to the official Kuryakyn webOdwiedź stronę internetową lub skontaktuj się bezpośrednio z działem obsługi klienta. Zachowaj dowód zakupu na potrzeby gwarancji.

For further assistance, visit the official Kuryakyn webstrona: www.kuryakyn.com