1. Wprowadzenie
Ten AMP Research PowerStep is an automatic, electric-powered running board designed to provide convenient and safe access to your truck. It extends instantly when the vehicle door is opened and retracts out of sight when the doors close, offering improved ground clearance, aerodynamics, and a clean appearance. This manual provides essential information for the setup, operation, maintenance, and troubleshooting of your PowerStep system.
Główne cechy:
- Automatyczne wdrażanie: Steps extend and retract automatically with door operation.
- Solidna konstrukcja: Features die-cast aluminum alloy components and precision stainless steel pivot pins for stability.
- Wysoka ładowność: 6-inch wide, cab-length step boards capable of supporting a 600 lb. load.
- Zwiększone bezpieczeństwo: Textured, slip-resistant stepping surface, onboard LED lighting, and 'Anti-Pinch' technology.
- Vehicle-Specific Fitment: Designed for 2007 - 2021 Toyota Tundra Crew Cab/Double Cab/Extended Crew Cab/CrewMax models.
2. Konfiguracja i instalacja
Ten AMP Research PowerStep is engineered for straightforward installation. For detailed, step-by-step instructions specific to your vehicle model, please refer to the official Instrukcja instalacji (PDF). This section provides a general overview.
Uwagi przed instalacją:
- Upewnij się, że na liście rzeczy do spakowania znajdują się wszystkie elementy.
- Basic tools are required. Some installations may require drilling small hole(s).
- Verify vehicle compatibility (2007 - 2021 Toyota Tundra Crew Cab/Double Cab/Extended Crew Cab/CrewMax).
Ogólne kroki instalacji:
- Review the complete installation manual before beginning.
- Mount the PowerStep linkage assemblies to the vehicle's frame.
- Attach the step boards to the linkage assemblies.
- Install the control module and connect the wiring harness to the vehicle's electrical system.
- Connect the LED step lights.
- Test the operation of the PowerSteps to ensure proper deployment and retraction.
Obraz: AMP Research PowerStep running boards, ready for installation.
Image: A person demonstrating the ease of entry into a truck with the PowerStep deployed.
3. Działanie
Ten AMP Research PowerStep system is designed for intuitive, automatic operation, requiring no manual intervention once installed correctly.
Automatic Deployment and Retraction:
- When a vehicle door is opened, the PowerStep will automatically deploy within approximately one second, providing a convenient step.
- When all vehicle doors are closed, the PowerStep will retract and stow itself discreetly under the vehicle, typically within three seconds.
- The integrated LED lights illuminate the step area upon deployment for enhanced visibility in low-light conditions.
- The 'Anti-Pinch' technology is designed to detect obstructions during retraction and will stop the step's movement to prevent injury or damage.
Obraz: Zbliżenie view highlighting the textured, slip-resistant surface of the PowerStep, ensuring secure footing.
4. Konserwacja
Regularna konserwacja zapewnia długowieczność i optymalną wydajność Twojego AMP Research PowerStep.
Czyszczenie:
- Periodically clean the step surface and the linkage mechanisms to remove dirt, mud, salt, or other debris.
- Use a mild soap and water solution. Avoid harsh chemicals or abrasive cleaners that could damage the finish.
- Dokładnie spłukać czystą wodą.
Kontrola:
- Inspect the pivot points and moving parts for any signs of wear or damage.
- Ensure all fasteners are secure. Do not overtighten.
- Check the wiring for any fraying or exposed sections.
- Lubricate the pivot points with a silicone-based lubricant as needed, especially in harsh weather conditions.
5. Rozwiązywanie Problemów
If you encounter issues with your PowerStep, refer to the table below for common problems and their potential solutions.
| Problem | Możliwa przyczyna | Rozwiązanie |
|---|---|---|
| Steps do not deploy or retract. | Power supply issue, loose wiring, motor malfunction, or obstruction. | Check vehicle's fuse box. Inspect all wiring connections for tightness and corrosion. Remove any obstructions. If problem persists, consult the full installation manual or professional assistance. |
| Podczas pracy kroki wydają głośny dźwięk. | Lack of lubrication, dirt/debris in mechanism. | Clean the linkage mechanisms thoroughly. Apply a silicone-based lubricant to all pivot points. |
| Oświetlenie LED nie działa. | Loose connection, damaged wiring, or faulty LED. | Check the wiring connections to the LED lights. Inspect for any visible damage to the light strips. |
| Steps deploy unevenly or are crooked. | Improper installation, loose mounting hardware, or damaged linkage. | Re-check mounting hardware for proper torque. Ensure the linkage arms are not bent or damaged. Refer to the installation manual for correct alignment. |
Obraz: Spód view of the PowerStep, illustrating the low-profile LED lighting and robust construction.
6. Specyfikacje
| Atrybut | Szczegół |
|---|---|
| Marka | AMP Badania |
| Numer modelu | 75137-01A |
| Tworzywo | Aluminium |
| Kolor | Czarny |
| Wykończenie zewnętrzne | Namalowany |
| Pozycja Wymiary (dł. x szer. x wys.) | 8 x 81 x 13 cala |
| Waga przedmiotu | 45 funtów |
| Ograniczenie wagowe | 600 funtów |
| UPC | 815410010347 |
| Typ serwisu pojazdu | Truck (Specifically 2007 - 2021 Toyota Tundra Crew Cab/Double Cab/Extended Crew Cab/CrewMax) |
7. Gwarancja i wsparcie
Informacje o gwarancji:
AMP Badania stoją za swoimi produktami, zapewniając bezproblemową i kompleksową obsługę Gwarancja 5 lat/60 000 milNiniejsza gwarancja obejmuje wady materiałowe i wykonawcze powstałe w wyniku normalnego użytkowania. Prosimy zachować dowód zakupu na potrzeby roszczeń gwarancyjnych.
Obsługa klienta:
For further assistance, technical support, or warranty claims, please contact AMP Research customer service. You may also find additional resources and FAQs on the official AMP Badania webstrona.
For the complete installation guide and other documentation, please refer to the oficjalny podręcznik użytkownika w formacie PDF.
