Instruction Manual for Brady Extra-Large Group Lock Box

1. Wprowadzenie

The Brady Extra-Large Group Lock Box (Model 51171) is designed to facilitate safe and efficient group lockout/tagout procedures. It provides a secure, centralized location for storing keys from individually locked-out energy isolation points, ensuring that equipment cannot be re-energized until all authorized personnel have completed their work and removed their personal locks.

2. Informacje dotyczące bezpieczeństwa

Always adhere to all applicable local, state, and federal lockout/tagout regulations (e.g., OSHA 29 CFR 1910.147). This lock box is a tool to aid in compliance but does not replace proper training and adherence to established safety protocols. Ensure all personnel involved are authorized and trained in lockout/tagnasze procedury.

• Never attempt to operate machinery or equipment that is under a lockout/tagsię procedura.
• Verify zero energy state before beginning any work.
• Ensure all keys are accounted for and secured within the lock box during group lockout.
• Inspect the lock box for damage before each use. Do not use if damaged.

3. składniki

The Brady Extra-Large Group Lock Box (Model 51171) includes:

• 1 x Brady Extra-Large Group Lock Box
• 1 x Instruction Guide (this document)

4. Konfiguracja

Before initial use, inspect the lock box for any signs of damage from shipping or handling. Ensure the latch mechanism operates smoothly and the handle is securely attached. No assembly is required for this product.

This image shows the Brady Extra-Large Group Lock Box in its closed position, highlighting its robust steel construction and integrated handle.

This image displays the lock box with its lid open, revealing the spacious interior designed to hold multiple keys.

5. Instrukcja obsługi

Group Lockout Procedure

Follow these steps for a typical group lockout procedure using the Brady Extra-Large Group Lock Box:

1. Isolate Energy Sources: The authorized supervisor or lead person identifies all energy isolation points for the equipment requiring maintenance or service. They then apply individual safety locks to each isolation point, securing the equipment in a zero energy state.
2. Collect Keys: The keys for all the individual safety locks applied in Step 1 are collected and placed inside the Brady Group Lock Box.
3. Secure the Lock Box: The supervisor or lead person closes the lock box and secures it with their personal safety lock through the designated hasp.
4. Individual Worker Lockout: Each authorized worker involved in the maintenance or service then attaches their own personal safety lock to one of the available holes on the lock box. This ensures that the lock box cannot be opened, and thus the equipment keys cannot be accessed, until every worker has removed their personal lock.
5. Wykonaj pracę: All workers proceed with their assigned maintenance or service tasks, knowing the equipment is safely locked out.
6. Remove Personal Locks: Upon completion of their work, each worker removes their personal safety lock from the lock box.
7. Re-energize Equipment: Once the last worker has removed their personal lock, the supervisor or lead person can then remove their master lock from the lock box, retrieve the keys, and re-energize the equipment after ensuring all personnel are clear and the area is safe.

This image shows the Brady Group Lock Box in a practical application, with multiple personal locks attached, signifying an active group lockout procedure.

6. Konserwacja

The Brady Extra-Large Group Lock Box is constructed from durable steel and requires minimal maintenance. To ensure longevity and proper function:

• Czyszczenie: Wytrzyj zewnętrzną powierzchnię za pomocą adamp cloth as needed to remove dust and grime. Avoid abrasive cleaners or solvents that could damage the finish.
• Kontrola: Periodically inspect the hinges, latch, and handle for any signs of wear, corrosion, or damage. Ensure all openings for padlocks are clear and unobstructed.
• Składowanie: Store the lock box in a dry, clean environment when not in use to prevent rust and maintain its condition.

7. Rozwiązywanie Problemów

Most issues with the Brady Group Lock Box can be resolved with simple checks:

• Trudności z zatrzaśnięciem/odpięciem: Check for any debris obstructing the latch mechanism. Ensure the lid is properly aligned with the base. If the issue persists and there is no visible damage, contact customer support.
• Korozja/Rdza: If minor surface rust appears, it can often be removed with a rust-inhibiting cleaner. For significant corrosion, consider replacing the unit to ensure safety and integrity.
• Missing Keys: This is a critical safety concern. Immediately halt all work, re-verify the lockout status of the equipment, and follow your organization's emergency procedures for lost keys during lockout/tagout. The lock box itself does not prevent key loss if not properly managed.

8. Specyfikacje

9. Gwarancja i wsparcie

For information regarding product warranty, technical support, or to purchase replacement parts, please contact Brady customer service directly. Refer to the official Brady webna stronie internetowej lub opakowaniu produktu, aby uzyskać najaktualniejsze dane kontaktowe.