1. Wprowadzenie
Thank you for choosing the Fender '65 Deluxe Reverb Guitar Amplifier. This manual provides essential information for the proper setup, operation, and maintenance of your amplifier. Please read it thoroughly to ensure optimal performance and longevity of your unit.
2. Koniec produktuview
The 22-watt '65 Deluxe Reverb amp is designed for rock, country, or blues players seeking a moderately powered amplifier suitable for both gigging and studio use. It delivers full, snappy guitar tones, characteristic of many famous recordings. This amplifier cechy:
- 22 watts of pure, clean power that compresses and overdrives sweetly when cranked up.
- One 12-inch 8-ohm Jensen C-12K speaker, offering incredible clarity and note separation.
- All-tube Fender reverb and vibrato, providing spatial ambiance and a legendary array of tones.
Obraz 1: Przód view of the Fender '65 Deluxe Reverb Guitar Amplifier, showing its dimensions. The amplifier measures 22.4 inches in height, 13.1 inches in depth, and 27.5 inches in width. The front panel features controls for Normal and Vibrato channels, along with the Fender logo and a silver grille cloth.
Image 2: Close-up of the Fender '65 Deluxe Reverb Guitar Amplifier's control panel. It features two input jacks for each channel (Normal and Vibrato), volume, treble, bass, reverb, speed, and intensity controls. The classic Fender logo is prominently displayed below the controls.
Film o produkcieview
Video 1: Champjon II Amps Demo Video. This video provides a demonstration of the Champion II series amplifiers, showcasing their sound and features. While not the '65 Deluxe Reverb, it offers insight into Fender's ampmożliwości lifiera.
3. Konfiguracja
- Rozpakowywanie: Ostrożnie usuń amplifier from its packaging. Retain all packing materials for future transport or storage.
- Umieszczenie: Umieść ampUstawić urządzenie na stabilnej, równej powierzchni. Zapewnić odpowiednią wentylację wokół urządzenia. Unikać umieszczania go w pobliżu źródeł ciepła lub w bezpośrednim świetle słonecznym.
- Podłączenie zasilania: Podłącz dostarczony przewód zasilający do amplifier's AC inlet and then to a grounded electrical outlet. Ensure the power switch is in the 'OFF' position before connecting.
- Podłączenie gitary: Plug your guitar into one of the 'INPUT' jacks on the front panel. For optimal tone, experiment with Input 1 and Input 2 on both the Normal and Vibrato channels.
- Podłączenie przełącznika nożnego: If using the two-button footswitch (included), connect it to the 'FOOTSWITCH' jack on the rear panel. This allows remote control of the Reverb and Vibrato effects.
4. Instrukcja obsługi
- Włączanie: Turn the 'POWER' switch to the 'ON' position. The pilot light will illuminate. Allow a few moments for the tubes to warm up before playing.
- Regulacja głośności: Start with the 'VOLUME' knob on your selected channel set to a low level. Gradually increase to your desired listening level.
- Tone Controls (Treble, Bass, Middle): Adjust the 'TREBLE' and 'BASS' knobs to shape your tone. The '65 Deluxe Reverb features a fixed middle frequency for its classic sound.
- Pogłos: The 'REVERB' knob controls the intensity of the spring reverb effect. Turn clockwise to increase the effect.
- Vibrato (Speed, Intensity): On the Vibrato channel, the 'SPEED' knob adjusts the rate of the vibrato effect, and 'INTENSITY' controls its depth.
- Fat Switch: (If applicable, some models may have a 'FAT' switch for a mid-boost.)
- Czuwanie: For short breaks, switch the amplifier to 'STANDBY' mode to prolong tube life. For longer breaks, turn the power off completely.
5. Konserwacja
- Czyszczenie: Wyczyść amplifier's exterior with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
- Pielęgnacja rurki: Vacuum tubes have a finite lifespan. If you notice a decrease in performance or unusual noise, consult a qualified technician for tube replacement.
- Wentylacja: Zapewnij amplifier's vents are clear of obstructions to prevent overheating.
- Składowanie: Gdy nie jest używany, przechowuj amplifier in a dry, temperature-controlled environment.
6. Rozwiązywanie Problemów
- Brak dźwięku:
- Sprawdź połączenia zasilania i upewnij się, że amplifier is turned on and not in standby.
- Verify guitar cable connections and ensure the guitar's volume is up.
- Check speaker cable connection (if applicable for external speakers).
- Test with a different guitar and cable to rule out faulty equipment.
- Distorted/Weak Sound:
- Upewnij się, że wszystkie kable są w dobrym stanie.
- Check for faulty tubes. A glowing red plate or microphonic noise can indicate a bad tube.
- Adjust tone controls; excessive bass or treble can cause distortion at high volumes.
- Excessive Hum/Noise:
- Zapewnij amplifier is plugged into a grounded outlet.
- Przesuń ampPrzechowywać z dala od innych urządzeń elektronicznych mogących powodować zakłócenia.
- Check for loose tube connections or faulty tubes.
7. Specyfikacje
| Moc wyjściowatage | 22 watów |
| Głośnik | One 12" 8-ohm Jensen C-12K |
| Rury | Dual 6V6 Groove Tubes output, one 5AR4 rectifier, four 12AX7 preamp, two 12AT7 |
| Kanały | Normal and Vibrato |
| Pogłos | Tube-driven Fender Reverb |
| Wibrato | Tube Vibrato |
| Przełącznik nożny | Two-button for Reverb and Vibrato on-off |
| Pokrycie | Black textured vinyl |
| Tkanina na kratkę | Srebrny |
| Wymiary produktu | 26 x 11.25 x 19.75 cala |
| Waga przedmiotu | 44 funta |
8. Gwarancja i wsparcie
Your Fender '65 Deluxe Reverb Guitar Amplifier comes with a Fender 1 Year Limited Warranty. For warranty claims or technical support, please refer to the contact information provided with your purchase or visit the official Fender webstrona.
Co znajduje się w pudełku: Fender Vintage Reissue Series '65 Deluxe Reverb Guitar Combo Amplifier with 12" Jensen C12K Speaker, 2-Button Footswitch, Fender 1 Year Limited Warranty.
