GRAEF CC150DE Electric Knife Sharpener Instruction Manual

1. Wprowadzenie

This manual provides detailed instructions for the safe and effective use of your GRAEF CC150DE Electric Knife Sharpener. Please read all instructions carefully before operating the device and retain this manual for future reference.

The GRAEF CC150DE is designed to sharpen and polish various types of kitchen knives, including smooth and serrated household knives, as well as specialized Japanese knives, using a multi-stage sharpening process with diamond and ceramic discs.

2. Instrukcje bezpieczeństwa

• Always ensure the sharpener is placed on a stable, flat surface before use.
• Podczas pracy należy trzymać dłonie i palce z dala od szczelin ostrzących.
• Nie zanurzaj temperówki w wodzie ani innym płynie. Czyść za pomocąamp tylko tkanina.
• Unplug the device from the power outlet when not in use, before cleaning, or if a malfunction occurs.
• Urządzenie to nie jest przeznaczone do użytku przez osoby (w tym dzieci) o ograniczonej sprawności fizycznej, sensorycznej lub umysłowej, a także osoby nieposiadające odpowiedniego doświadczenia lub wiedzy, chyba że znajdują się one pod nadzorem osoby odpowiedzialnej za ich bezpieczeństwo lub otrzymały od niej instrukcje dotyczące korzystania z urządzenia.
• Do not attempt to sharpen scissors or other tools not specified for this device.
• Unikaj stosowania nadmiernej siły podczas ostrzenia, gdyż może to spowodować uszkodzenie ostrza noża lub ostrzałki.
• Ensure the power cord is not damaged and does not come into contact with hot surfaces or sharp edges.

3. Koniec produktuview

3.1 Funkcje

• Two-Phase Diamond Sharpening: Utilizes diamond discs for initial sharpening at 15° and 20° angles.
• Ceramic Polishing/Honing: A third phase with ceramic discs for fine polishing and deburring.
• Dual Sharpening Angles: 15° for Japanese knives and 20° for European/household knives (smooth and serrated).
• Slow-Rotating Abrasive Discs: Prevents overheating of the knife blade, preserving its integrity.
• Elastomer Angle Guide: Ensures precise blade positioning for consistent sharpening results.
• Minimal Material Removal: Designed to remove only the necessary amount of material, extending knife life.
• Przełącznik włączania/wyłączania: Convenient control for operation.

3.2 Składniki

The GRAEF CC150DE features a robust plastic casing and three distinct sharpening phases:

• Faza 1: Diamond sharpening for 15° angle (primarily for Japanese knives).
• Faza 2: Diamond sharpening for 20° angle (for European/household knives).
• Faza 3: Ceramic polishing/honing for all knife types.
• Przycisk zasilania: Located on the front for easy access.

Obraz: Ponadview of the GRAEF CC150DE Electric Knife Sharpener, highlighting its compact design and clearly labeled sharpening slots (1, 2, 3) and the power switch.

Image: A detailed close-up of the GRAEF CC150DE's sharpening slots, clearly showing the numerical labels for Phase 1, Phase 2, and Phase 3.

4. Konfiguracja

1. Unpack the GRAEF CC150DE sharpener and remove all packaging materials.
2. Place the sharpener on a clean, dry, and stable surface. Ensure there is enough space around the unit for safe operation.
3. Podłącz przewód zasilający do odpowiedniego gniazdka elektrycznego 230 V.
4. Ensure the power switch is in the "Off" position before plugging in.

5. Instrukcja obsługi

Before sharpening, ensure your knife blade is clean and dry. Always pull the knife towards you, never push it away from you, and apply gentle, consistent pressure.

5.1 Sharpening Japanese Knives (15° Angle)

1. Włącz ostrzałkę za pomocą wyłącznika zasilania.
2. Insert the heel of the knife blade into Faza 1 (15° diamond sharpening slot).
3. Pull the knife slowly and steadily towards you, maintaining light, even pressure, from the heel to the tip. The elastomer guide will help maintain the correct angle.
4. Repeat this process 3-5 times for each side of the blade, alternating between the left and right slots of Phase 1.
5. Przenieś się do Faza 3 (ceramic polishing slot). Insert the heel of the knife blade into Phase 3.
6. Pull the knife slowly and steadily towards you, applying very light pressure, from the heel to the tip.
7. Repeat this process 3-5 times for each side of the blade, alternating between the left and right slots of Phase 3, to achieve a fine, polished edge.
8. Turn off the sharpener and carefully wipe the blade clean with a damp płótno.

Image: Illustration of knives being sharpened, demonstrating the 15° and 20° sharpening angles supported by the device for different knife types.

5.2 Sharpening European/Household Knives (20° Angle)

1. Włącz ostrzałkę za pomocą wyłącznika zasilania.
2. Insert the heel of the knife blade into Faza 2 (20° diamond sharpening slot).
3. Pull the knife slowly and steadily towards you, maintaining light, even pressure, from the heel to the tip.
4. Repeat this process 3-5 times for each side of the blade, alternating between the left and right slots of Phase 2.
5. Przenieś się do Faza 3 (ceramic polishing slot). Insert the heel of the knife blade into Phase 3.
6. Pull the knife slowly and steadily towards you, applying very light pressure, from the heel to the tip.
7. Repeat this process 3-5 times for each side of the blade, alternating between the left and right slots of Phase 3, to achieve a fine, polished edge.
8. Turn off the sharpener and carefully wipe the blade clean with a damp płótno.

Image: A close-up of a diamond, symbolizing the durable diamond abrasive discs used in Phases 1 and 2 for optimal blade construction and minimal material removal without overheating.

5.3 Polishing/Honing Only (Phase 3)

For knives that are already sharp but require a finer edge or occasional honing, you can use Phase 3 directly.

1. Włącz ostrzałkę.
2. Insert the heel of the knife blade into Faza 3 (ceramic polishing slot).
3. Pull the knife slowly and steadily towards you, applying very light pressure, from the heel to the tip.
4. Repeat this process 5-10 times for each side of the blade, alternating between the left and right slots of Phase 3.
5. Turn off the sharpener and carefully wipe the blade clean with a damp płótno.

Image: A knife with a finely polished edge, shown next to sliced fruit, illustrating the sharp and clean cut achieved after using the polishing phase.

6. Konserwacja

• Przed czyszczeniem zawsze odłączaj ostrzałkę od zasilania.
• Wytrzyj obudowę urządzenia miękką, damp ściereczką. Nie używaj środków czyszczących o właściwościach ściernych ani nie zanurzaj urządzenia w wodzie.
• Periodically, remove any metal dust or debris that may accumulate in the sharpening slots. Use a soft brush or a vacuum cleaner with a narrow attachment.
• Store the sharpener in a dry, safe place when not in use.

7. Rozwiązywanie Problemów

8. Specyfikacje

9. Gwarancja i wsparcie

For warranty information, technical support, or inquiries regarding spare parts, please contact GRAEF customer service directly or visit their official webSzczegółowe warunki gwarancji mogą się różnić w zależności od regionu i sprzedawcy.

Information regarding the availability of spare parts is not provided in this manual. Please contact the manufacturer for details.