Wstęp
This manual provides instructions for the proper installation and use of the Fernco FSD-UA-001 Universal StormDrain Catch Basin Adapter. This adapter is designed to connect various pipe types to a catch basin, offering flexibility in drainage system configurations.
Cechy produktu
- Universal catch basin adapter design.
- Wymiary: 7.25 cala (dł.) x 7.25 cala (szer.) x 3 cala (wys.).
- Allows for flexible positioning of the basin wylot.
- Compatible with 3-inch and 4-inch sewer and drain pipe.
- Compatible with corrugated pipe.
- Compatible with triple wall pipe.
- Compatible with 3-inch and 4-inch Schedule 40 PVC pipe.
- Wyprodukowano w USA.
Konfiguracja i instalacja
The Fernco FSD-UA-001 adapter simplifies connecting drainage pipes to a catch basin. Follow these general guidelines for installation:
- Przygotowanie: Ensure the catch basin opening and the pipe ends are clean and free of debris.
- Pozycjonowanie: Determine the desired location for the basin outlet. The adapter's design allows for flexibility in choosing the side of the basin do podłączenia rur.
- Kompatybilność rur: Verify that the pipe you intend to connect is either 3-inch or 4-inch sewer and drain pipe, corrugated pipe, triple wall pipe, or 3-inch or 4-inch Schedule 40 PVC.
- Połączenie: Insert the appropriate end of the adapter into the catch basin opening. Then, firmly insert the drainage pipe into the adapter. Ensure a snug fit to prevent leaks.
- Securing (if necessary): Depending on the application and local codes, additional securing methods (e.g., sealant, clamps) may be required. Consult local plumbing regulations.
Image: The Fernco FSD-UA-001 Universal StormDrain Catch Basin Adapter. This image displays the adapter's conical design, which accommodates various pipe sizes and types for connection to a storm drain catch basin.
Zasady działania
Once installed, the Fernco FSD-UA-001 adapter functions as a passive conduit, directing water flow from the connected drainage pipe into the catch basin. Its universal design ensures a secure and efficient connection for various pipe materials and sizes within its specified range.
Konserwacja
The FSD-UA-001 adapter requires minimal maintenance. Periodically inspect the connection points for any signs of wear, cracks, or dislodgement. Ensure that the area around the catch basin and adapter remains clear of debris to prevent blockages in the drainage system.
Rozwiązywanie problemów
- Wyciek na połączeniu: Ensure the pipe is fully inserted into the adapter and that the adapter is properly seated in the catch basin. Verify pipe compatibility. If necessary, apply appropriate sealant designed for drainage systems.
- Adapter Does Not Fit Catch Basin: Confirm that the catch basin is compatible with a universal adapter designed for its size. This specific adapter is often used with square 12-inch catch basins. Refer to the catch basin manufacturer's specifications for compatible adapters.
- Pipe Does Not Fit Adapter: Double-check that the pipe diameter is either 3 inches or 4 inches and that it is one of the compatible types (sewer and drain, corrugated, triple wall, or Sch. 40 PVC).
Specyfikacje
| Atrybut | Szczegół |
|---|---|
| Numer modelu | FSD-UA-001 |
| Marka | Fernco |
| Wymiary (dł. x szer. x wys.) | 7.25" x 7.25" x 3" |
| Kolor | Czarny |
| Typ złącza | Adapter |
| Kompatybilne rozmiary rur | 3" i 4" |
| Kompatybilne typy rur | Sewer and drain pipe, corrugated pipe, triple wall pipe, Sch. 40 PVC |
| Waga przedmiotu | 0.01 uncji |
| UPC | 018578013315 |
Informacje o gwarancji
For detailed warranty information regarding the Fernco FSD-UA-001 Universal StormDrain Catch Basin Adapter, please refer to the official Fernco website or contact Fernco customer service directly. Warranty terms and conditions may vary.
Obsługa klienta
Should you require further assistance, have questions about installation, or need to report an issue, please contact Fernco customer support. Visit the official Fernco webstrona zawierająca dane kontaktowe i dodatkowe zasoby.
