Metra 95-2009 Double DIN Installation Multi-Kit User Manual

1. Wprowadzenie

This manual provides detailed instructions for installing the Metra 95-2009 Double DIN Installation Multi-Kit. This kit is designed to facilitate the installation of a double-DIN radio or two single-DIN radios in select 1990 to 2012 GM, Honda, Isuzu, and Suzuki vehicle models. It features Metra's patented quick-release snap-in ISO mount system with a custom trim ring, ensuring a secure and integrated fit for your aftermarket stereo system.

2. Informacje dotyczące bezpieczeństwa

• Przed rozpoczęciem jakichkolwiek prac elektrycznych należy zawsze odłączyć ujemny zacisk akumulatora pojazdu, aby zapobiec zwarciom i porażeniu prądem.
• Podczas instalacji należy nosić odpowiedni sprzęt ochronny, w tym okulary ochronne.
• Aby zapobiec zagrożeniom elektrycznym, należy upewnić się, że wszystkie połączenia są solidne i właściwie zaizolowane.
• Refer to your vehicle's service manual for specific instructions on removing dash components and accessing wiring.

3. Zawartość opakowania

Sprawdź, czy w zestawie znajdują się wszystkie elementy wymienione poniżej:

• Double DIN Dash Kit Components (Plastic Brackets and Trim Ring)
• Śruby montażowe i elementy złączne
• Instrukcja instalacji

Figure 3.1: Main components of the Metra 95-2009 Double DIN Installation Multi-Kit, including plastic brackets and trim ring.

Figure 3.2: Included mounting screws and fasteners for securing the radio and dash kit.

4. Konfiguracja

4.1 Wymagane narzędzia

• Narzędzie do usuwania paneli
• Zestaw śrubokrętów (krzyżakowych i płaskich)
• Szczypce do zdejmowania izolacji/zaciskarki
• Multimeter (for verifying wiring)
• Taśma elektryczna lub rurki termokurczliwe
• Opaski na suwak

4.2 Kontrole przed instalacją

• Confirm vehicle compatibility with the Metra 95-2009 kit.
• Read through the entire instruction manual before starting.
• Zbierz wszystkie niezbędne narzędzia i komponenty.

5. Instrukcje instalacji

5.1 Demontaż radia fabrycznego

Carefully remove the factory radio and any surrounding trim panels using a panel removal tool. Refer to your vehicle's specific service manual for precise instructions on trim removal and screw locations. Disconnect all wiring harnesses and the antenna cable from the back of the factory radio.

5.2 Assembling the Dash Kit

The Metra 95-2009 kit includes plastic brackets and a custom trim ring. Follow the kit's specific instructions to break off any unnecessary tabs from the brackets that are not required for your vehicle's application. Secure the new aftermarket radio to the dash kit brackets using the screws provided with your new radio.

5.3 połączeń przewodów

Connect the wiring harness from your new radio to the vehicle's wiring harness. Match wire colors carefully (e.g., yellow to yellow for constant 12V, red to red for ignition 12V, black to black for ground). Use wire strippers/crimpers and splice connectors or solder for secure connections. Insulate all connections with electrical tape or heat shrink tubing. If your vehicle has steering wheel controls, consult the radio's manual for specific connections, or tape off unused wires.

5.4 Installing the New Radio

Once the radio is secured to the dash kit and all wiring connections are made, carefully slide the assembled unit into the vehicle's dash opening. Secure the radio and dash kit to the vehicle's mounting points using the original screws or those provided with the kit. Reinstall any removed trim panels, ensuring they snap securely into place.

5.5 Reconnecting the Battery and Testing

Reconnect the vehicle's negative battery terminal. Turn on the vehicle and test the functionality of your new radio, including audio, display, and any connected accessories like a backup camera. Ensure all features are working correctly before finalizing the installation.

6. Operating the New Radio

Refer to the instruction manual provided with your specific aftermarket radio for detailed operating instructions, including setting up stations, adjusting audio settings, and utilizing advanced features.

7. Konserwacja

The Metra 95-2009 dash kit requires minimal maintenance. Periodically inspect the mounting screws for tightness and ensure the trim ring remains securely in place. Clean the plastic components with a soft, damp płótno. Unikaj stosowania ostrych środków chemicznych lub ściernych środków czyszczących.

8. Rozwiązywanie Problemów

• Radio się nie włącza: Check the vehicle's fuse box and the radio's inline fuse. Verify all power and ground connections are secure.
• Brak dźwięku: Ensure all speaker wires are correctly connected and not shorted. Check the radio's audio settings.
• Poor Fit of Dash Kit: Double-check that all necessary tabs were removed from the kit components and that the radio is properly aligned within the brackets.
• Luźne połączenia: Re-examine all wiring connections for tightness and proper insulation.

9. Specyfikacje

• Marka: Metra
• Numer modelu: 95-2009
• Tworzywo: Plastikowy
• Wymiary przedmiotu (dł. x szer. x wys.): 14 x 7 x 3.5 cala
• Waga przedmiotu: 6.4 uncji
• Zgodność: Select 1990-2012 GM, Honda, Isuzu, Suzuki vehicles
• Typ montażu: Double DIN / Stacked ISO DIN

10. Gwarancja i wsparcie

This product is covered by a double DIN dash kit warranty. For specific warranty details, claims, or technical support, please refer to the documentation included with your purchase or contact Metra Electronics Corp directly. You can also visit the official Metra webwitryny, aby uzyskać dodatkowe zasoby i informacje kontaktowe.

Figure 10.1: Metra - The Installer's Choice