MTX Dual 12-Inch Subwoofers with Loaded Enclosure

Wstęp

The MTX Dual 12-Inch Subwoofers with Loaded Enclosure are designed to deliver powerful and deep bass sound for your car audio system. This manual provides essential information for the proper setup, operation, and maintenance of your subwoofer system to ensure optimal performance and longevity.

Główne cechy obejmują:

• Experience the unbeatable power of dual-loaded subwoofers with a maximum power of 1200W and a reliable RMS output of 400W, conveniently enclosed to deliver outstanding performance.
• Enjoy profound, resonant bass as the 2-inch aluminum single 2-ohm voice coil and the 48-ounce magnet work together in flawless harmony, delivering a powerful audio performance.
• Ensuring speaker durability features a rubber surround and polypropylene cone; Solid 5/8 inch MDF construction, covered in black carpet, keeps your subwoofers securely in place.
• Achieve the ideal fusion of style and power with a sealed enclosure featuring the iconic Terminator logo and the impressive performance of a Terminator mono block MTX ampliyfikator.
• Frequency response range is 37-150 Hz; Bottom has a depth of 13.5 inches, top has a depth of 11.13 inches with dimensions measuring 29.69 inches in width and 14 inches in height.

Figure 1: The MTX Dual 12-Inch Subwoofers in their loaded enclosure.

Co jest w pudełku

Po rozpakowaniu upewnij się, że wszystkie przedmioty są obecne i w dobrym stanie:

• MTX Dual 12-Inch Subwoofers with Loaded Enclosure

Organizować coś

1. Umieszczenie

The sealed enclosure is designed for optimal performance within a vehicle. Consider the dimensions (13.5"D x 29.69"W x 14"H) to find a secure and stable location, typically in the trunk or cargo area, that allows for proper air circulation around the enclosure and any connected ampliyfikator.

Figure 2: Proper placement of the subwoofer enclosure in a vehicle's trunk.

Figure 3: Detailed dimensions of the subwoofer enclosure for precise fitting.

2. Okablowanie i połączenia

The MTX TNE212D features a 2-ohm impedance. Ensure your amplifier is stable and capable of delivering power efficiently at this impedance. Connect the subwoofer enclosure to your amplifier's subwoofer output using appropriate gauge speaker wire.

The enclosure features convenient push-terminal connectors on the rear. Press down on the terminal, insert the stripped speaker wire, and release to secure the connection. Ensure correct polarity (positive to positive, negative to negative) for optimal sound reproduction.

Figure 4: Rear terminal connections for speaker wire.

3. Amplifier Konfiguracja

Ustaw swój amplifier's gain control to match the output voltage of your head unit. Start with the gain at its lowest setting and slowly increase it until you hear distortion, then back off slightly. Adjust the low-pass filter (LPF) on your amplifier to around 80-100 Hz to ensure the subwoofers only reproduce low frequencies, preventing distortion and improving overall sound quality.

Operating Your Subwoofers

1. Okres docierania

Allow for a break-in period of approximately 20-30 hours of normal listening before pushing the subwoofers to their maximum capabilities. This allows the speaker components to loosen up and perform optimally.

2. Volume and Gain Control

Always adjust the volume from your head unit. The amplifier's gain control should be set once during initial setup and generally not used for daily volume adjustments. Avoid excessive volume levels that cause audible distortion, as this can damage the subwoofers and ampliyfikator.

3. Regulacja dźwięku

Utilize your head unit's bass controls or equalizer settings to fine-tune the bass output to your preference. Experiment with different settings to find the balance that best suits your music and listening environment.

Konserwacja

Regular maintenance will help prolong the life and performance of your MTX subwoofers:

• Czyszczenie: Use a soft, dry cloth to wipe down the enclosure and subwoofer cones. Avoid using harsh chemicals or abrasive cleaners.
• Kontrola połączenia: Okresowo sprawdzaj wszystkie połączenia przewodów, aby upewnić się, że są solidne i nie mają śladów korozji. Luźne połączenia mogą prowadzić do pogorszenia wydajności lub uszkodzenia.
• Warunki środowiskowe: Protect the enclosure from direct sunlight, extreme temperatures, and moisture. These conditions can degrade the materials over time.

Rozwiązywanie problemów

No Sound from Subwoofers

• Check all power and ground connections to the ampliyfikator.
• Verify the remote turn-on wire is connected and receiving power.
• Zapewnij amplifier is powered on (check indicator lights).
• Confirm speaker wires are securely connected to both the amplifier and the subwoofer enclosure, with correct polarity.
• Check the audio source unit (head unit) for proper output and settings.

Zniekształcona lub słaba jakość dźwięku

• Zmniejszyć ampustawienie wzmocnienia lifiera.
• Lower the volume on your head unit.
• Check for loose speaker wire connections or frayed wires.
• Zapewnij amplifier's low-pass filter (LPF) is set correctly (e.g., 80-100 Hz).
• Verify the subwoofer impedance (2 ohms) matches the ampstabilna impedancja robocza transformatora.

Subwoofers Overheating

• Zapewnij odpowiednią wentylację wokół amplifier and subwoofer enclosure.
• Reduce prolonged high-volume listening.
• Check for proper impedance matching between the subwoofers and ampliyfikator.

Specyfikacje

Gwarancja i wsparcie

The MTX Dual 12-Inch Subwoofers with Loaded Enclosure come with a Limited Warranty. For specific details regarding warranty coverage, terms, and conditions, please refer to the official user manual provided by MTX.

For further assistance, technical support, or to download the complete user manual in PDF format, please visit the official MTX webodwiedź witrynę lub zapoznaj się z dokumentacją dostarczoną wraz z zakupem.

Pobierz oficjalną instrukcję obsługi (PDF)