1. Wprowadzenie
This manual provides essential information for the proper installation and maintenance of your Bosch 3400 Engine Oil Filter. Adhering to these instructions will help ensure optimal performance and longevity of your vehicle's engine lubrication system. Please read this manual thoroughly before proceeding with installation or maintenance.
2. Koniec produktuview
The Bosch 3400 Engine Oil Filter is designed to protect your engine by effectively removing contaminants from the engine oil. This filter features a durable construction with synthetic/paper media and a steel/plastic housing, ensuring reliable filtration for car applications. It is engineered for universal fitment, making it suitable for a wide range of vehicles.
Obraz 1: Bosch 3400 Engine Oil Filter. This image displays the exterior of the oil filter, highlighting its robust design and standard automotive filter appearance.
3. Informacje dotyczące bezpieczeństwa
Zawsze priorytetowo traktuj bezpieczeństwo podczas pracy przy pojeździe. Nieprzestrzeganie zasad bezpieczeństwa może skutkować obrażeniami ciała lub uszkodzeniem pojazdu.
- Przed rozpoczęciem jakichkolwiek prac należy upewnić się, że pojazd jest zaparkowany na równej powierzchni i silnik jest zimny.
- Stosuj odpowiedni sprzęt ochrony osobistej, w tym okulary ochronne i rękawice.
- Properly dispose of used engine oil and oil filters according to local environmental regulations.
- Consult your vehicle's service manual for specific safety warnings and procedures.
4. Instalacja (konfiguracja)
The Bosch 3400 Engine Oil Filter is designed to be ready for installation without modification. However, proper installation is crucial for effective operation. If you are unsure about any step, it is recommended to seek professional assistance.
Ogólne kroki instalacji:
- Przygotuj pojazd: Park the vehicle on a level surface, engage the parking brake, and allow the engine to cool completely. Raise the vehicle safely using jack stands if necessary.
- Spuść stary olej: Place a suitable drain pan under the oil pan. Remove the drain plug and allow all old engine oil to drain completely.
- Usuń stary filtr: Locate the old oil filter. Use an oil filter wrench to loosen and remove the old filter. Be prepared for residual oil to drain from the filter.
- Przygotuj nowy filtr: Apply a thin film of new engine oil to the rubber gasket of the Bosch 3400 filter. This helps ensure a proper seal.
- Zainstaluj nowy filtr: Thread the new Bosch 3400 filter onto the engine by hand. Once the gasket makes contact with the engine block, tighten the filter an additional 3/4 to 1 full turn, or as specified in your vehicle's service manual. Nie dokręcaj zbyt mocno.
- Uzupełnij olej silnikowy: Replace the oil drain plug and tighten it to the manufacturer's specifications. Refill the engine with the recommended type and quantity of new engine oil.
- Sprawdź, czy nie ma wycieków: Start the engine and let it run for a few minutes. Check for any oil leaks around the new filter and the drain plug. Turn off the engine and recheck the oil level, adding more if necessary.
5. Zagadnienia dotyczące użytkowania
The engine oil filter plays a critical role in maintaining engine health by trapping harmful particles and contaminants. A properly functioning filter ensures clean oil circulates through the engine, reducing wear and extending engine life. Always use the correct filter for your vehicle's specifications.
6. Konserwacja
Regular replacement of the engine oil filter is essential for optimal engine performance and longevity. Refer to your vehicle's owner's manual or service schedule for recommended oil and filter change intervals. Typically, oil filters should be replaced every time the engine oil is changed, which is often every 3,000 to 10,000 miles, depending on the vehicle and oil type.
7. Rozwiązywanie Problemów
If you encounter issues after installing the Bosch 3400 Engine Oil Filter, consider the following:
- Oil Leak Around Filter:
- Przed zamontowaniem nowego filtra należy upewnić się, że stara uszczelka została całkowicie usunięta z bloku silnika.
- Verify the new filter is tightened correctly (hand-tight plus 3/4 to 1 full turn). Do not overtighten.
- Check for any damage to the filter's gasket or the engine block's mating surface.
- Low Oil Pressure Light:
- Immediately check the engine oil level. If low, add oil.
- Ensure the filter is correctly installed and not leaking.
- If the light persists after checking oil level and filter installation, consult a qualified mechanic.
8. Specyfikacje
| Atrybut | Szczegół |
|---|---|
| Marka | Bosh |
| Numer modelu | 3400 |
| Tworzywo | Synthetic/Paper (Media), Steel/Plastic (Housing) |
| Klasa produktu | Część wydajnościowa |
| Typ serwisu pojazdu | Samochód |
| Waga przedmiotu | 0.9 funta (około 14.4 uncji) |
| Typ dopasowania samochodowego | Uniwersalne dopasowanie |
| UPC | 826732869964 |
| Producent | Bosch Automotive Products |
| Pierwsza dostępna data | 25 czerwca 2009 r. |
9. Gwarancja i wsparcie
For specific warranty information regarding the Bosch 3400 Engine Oil Filter, please refer to the documentation included with your purchase or contact Bosch Automotive Products directly. Support resources, including additional product information and contact details, may be available on the official Bosch webstronie internetowej lub u autoryzowanych sprzedawców.
You can visit the Bosch Store for more products and information: Sklep Bosch na Amazon
