Wstęp
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Progress Lighting P832-TG Remodel Recessed Lighting Housing. Designed for use in existing ceilings, this housing features an integral flange and exclusive locking bars for quick and secure mounting.
Please read this manual thoroughly before beginning installation to ensure proper setup and safe operation. Keep this manual for future reference.
Informacje dotyczące bezpieczeństwa
OSTRZEŻENIE: To avoid fire, shock, or death; always turn off power at the circuit breaker or fuse box before wiring. All wiring must be in accordance with national and local electrical codes.
- Always disconnect power before installing, servicing, or cleaning this fixture.
- Instalację powinien przeprowadzić wykwalifikowany elektryk.
- Sprawdź, czy wszystkie połączenia są solidne i właściwie zaizolowane.
- Ten produkt posiada certyfikaty UL i CUL dlaamp locations. Do not install in wet locations.
- Rated for 60-degree supply wires in end-of-run applications.
- Rated for 4 #12 90-degree conductors (2 in and 2 out).
Ostrzeżenie dotyczące propozycji 65: This product may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Produkt ponadview
The Progress Lighting P832-TG is a remodel recessed lighting housing designed for easy installation in existing ceilings. Its robust construction and thoughtful design ensure a secure fit and reliable performance.
Główne cechy:
- Integral flange on housing for a clean finish.
- Exclusive locking bars for quick mounting in ceilings from 1/2-inch to 1-inch thick.
- Posiada certyfikaty UL i CUL dla damp lokalizacje i okablowanie przelotowe.
- Rated for 4 #12 90-Degree conductors (2 in and 2 out).
- Medium base lamp gniazdo.
Składniki:
The P832-TG housing consists of a galvanized steel junction box, a flexible conduit connecting to the housing, and the main housing unit with integral flange and locking bars. It is designed to accommodate a medium base lamp and requires a separate trim for a complete fixture.
Figure 1: Progress Lighting P832-TG Recessed Lighting Housing. This image shows the main housing unit, the junction box, and the flexible conduit connecting them.
Rysunek 2: Wymiarowy view of the P832-TG housing. Key dimensions include 11-3/8 inches width, 5-1/2 inches height, and 4-13/16 inches extension, with a 4-1/4 inch ceiling opening.
Konfiguracja i instalacja
Follow these steps for proper installation of the P832-TG housing in existing ceilings. Ensure power is disconnected at the circuit breaker before proceeding.
- Prepare Ceiling Opening: Create a 4-1/4 inch diameter opening in the ceiling at the desired location. Ensure there are no obstructions (joists, pipes, wires) within the installation area.
- Podłącz okablowanie: Open the junction box cover. Connect the building's electrical supply wires to the corresponding wires in the housing's junction box. Use appropriate wire connectors (not supplied). Ensure proper grounding. The housing is rated for 4 #12 90-degree conductors (2 in and 2 out).
- Włóż obudowę: Carefully insert the housing through the ceiling opening. The integral flange will rest against the ceiling surface.
- Bezpieczne zakwaterowanie: The exclusive locking bars are designed to secure the housing in ceilings from 1/2-inch to 1-inch thick. As you push the housing into the opening, the locking bars will engage and clamp onto the ceiling material. For thicker ceilings, a small screwdriver or pick can be used to rotate the bar up during installation to ensure proper engagement.
- Montaż listwy wykończeniowej (sprzedawanej oddzielnie): Once the housing is securely in place, install the desired recessed lighting trim according to its specific instructions.
- Zainstaluj Lamp: Insert a medium base lamp (bulb) into the socket within the housing.
- Przywróć zasilanie: Po zakończeniu instalacji i zabezpieczeniu wszystkich połączeń należy przywrócić zasilanie za pomocą wyłącznika automatycznego.
Działanie
The Progress Lighting P832-TG Remodel Recessed Lighting Housing operates as a fixture for a medium base lamp. Once properly installed and connected to a power source, the housing will provide illumination when a compatible lamp is inserted and the electrical circuit is activated via a wall switch or dimmer (not included).
Upewnij się, że lamp used is compatible with the housing's specifications and your electrical system.
Konserwacja
The P832-TG housing requires minimal maintenance. Regular cleaning and lamp replacement are the primary maintenance tasks.
- Czyszczenie: Before cleaning, ensure power is disconnected at the circuit breaker. Wipe the exterior of the housing and any installed trim with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish.
- Lamp Wymiana: Disconnect power before replacing a lamp. Pozwól staremu lamp to cool completely before removal. Replace with a new medium base lamp of the appropriate wattagi wpisz.
- Kontrola: Periodically inspect the housing and wiring for any signs of damage or wear. If any issues are found, disconnect power and consult a qualified electrician.
Rozwiązywanie problemów
If you encounter issues with your recessed lighting housing, refer to the following table for common problems and solutions.
| Problem | Możliwa przyczyna | Rozwiązanie |
|---|---|---|
| Światło się nie włącza. | Brak zasilania urządzenia. Lamp is faulty or loose. Błąd okablowania. | Sprawdź wyłącznik/bezpiecznik. Upewnij się, że przełącznik ścienny jest włączony. Zamień lamp or tighten. Aby sprawdzić okablowanie, skonsultuj się z wykwalifikowanym elektrykiem. |
| Światło migocze. | Luźne lamp. Luźne połączenie okablowania. Niekompatybilny przełącznik ściemniacza. | Dokręcić lamp. Odłącz zasilanie i sprawdź połączenia przewodów. Ensure dimmer is compatible with the lamp typ. |
| Housing is not secure in ceiling. | Locking bars not fully engaged. Ceiling thickness outside specified range. | Ensure locking bars are fully engaged. Re-insert housing if necessary. Verify ceiling thickness is between 1/2-inch and 1-inch. |
Jeśli po wypróbowaniu tych rozwiązań problem nadal występuje, skontaktuj się z działem obsługi klienta lub wykwalifikowanym elektrykiem.
Specyfikacje
| Atrybut | Wartość |
|---|---|
| Numer modelu | P832-TG |
| Marka | Oświetlenie Progress |
| Tworzywo | Stali ocynkowanej |
| Rodzaj wykończenia | Gotowy |
| Kolor | Niedokończony |
| Typ źródła światła | Incandescent (compatible with LED retrofit bulbs) |
| Tomtage | 120 wolty |
| Otwór sufitowy | 4-1/4 cala |
| Wymiary (dł. x szer. x wys.) | 5"L x 6"W x 6"H (Product) / 11-3/8" Width x 5-1/2" Height (Housing) |
| Waga przedmiotu | 1.57 funta |
| Metoda instalacji | Wpuszczony |
| Zgodność grubości sufitu | 1/2-inch to 1-inch thick |
| Na liście UL/CUL | Yes, for damp lokalizacje i okablowanie przelotowe |
Informacje o gwarancji
The Progress Lighting P832-TG Remodel Recessed Lighting Housing comes with a 1-roczna ograniczona gwarancja od daty zakupu. Niniejsza gwarancja obejmuje wady materiałowe i wykonawcze przy normalnym użytkowaniu.
Please retain your proof of purchase for warranty claims. The warranty does not cover damage resulting from improper installation, misuse, abuse, or acts of nature. For full warranty terms and conditions, please refer to the documentation included with your product or contact Progress Lighting customer support.
Obsługa klienta
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Progress Lighting customer support.
You can also visit the official Progress Lighting store on Amazon for more product information and resources: Sklep z oświetleniem Progress
Please have your model number (P832-TG) and purchase information ready when contacting support.