Hansgrohe Axor Citterio 3-otworowy montaż ścienny Basin Mixer with Lever Handles, Model 39315000

Wstęp

This manual provides essential information for the installation, operation, and maintenance of your Hansgrohe Axor Citterio 3-Hole Wall-Mounted Basin Mixer with Lever Handles, Model 39315000. Please read these instructions carefully before installation and retain them for future reference to ensure safe and efficient use of the product.

Konfiguracja i instalacja

The Hansgrohe Axor Citterio 3-Hole Wall-Mounted Basin Mixer is designed for wall-mounted installation. Proper rough-in plumbing is crucial for a successful setup. It is recommended that installation be performed by a qualified plumber to ensure compliance with local plumbing codes and optimal performance.

Before beginning installation, ensure all necessary tools and components are available. Turn off the main water supply to prevent leaks. The mixer requires three pre-drilled holes in the wall for the spout and two lever handles.

Rysunek 1: Diagram wymiarów produktu
This diagram illustrates the key dimensions and components of the Hansgrohe Axor Citterio 3-Hole Wall-Mounted Basin Mixer. It shows the spout, hot/cold handles, and their respective measurements for proper installation and rough-in planning. All dimensions are in millimeters.

Follow the detailed instructions provided in the packaging for connecting the water lines, securing the components to the wall, and testing for leaks. Ensure all connections are tight but do not overtighten.

Instrukcja obsługi

The Axor Citterio basin mixer features two lever handles for controlling water flow and temperature. The left handle typically controls hot water, and the right handle controls cold water, though this can vary based on plumbing setup.

• Przepływ wody: To turn on the water, lift either lever handle. The further you lift, the greater the water flow. To turn off, push the lever handle down.
• Kontrola temperatury: To adjust the water temperature, move the hot (left) or cold (right) lever handle. Moving the hot handle will increase the hot water proportion, and moving the cold handle will increase the cold water proportion. Adjust both levers simultaneously to achieve your desired temperature and flow rate.

Always ensure the water is turned off completely after use to conserve water and prevent accidental overflow.

Konserwacja

Regular cleaning and maintenance will help preserve the finish and functionality of your Hansgrohe Axor Citterio mixer.

• Czyszczenie wykończenia: To maintain the chrome finish, clean regularly with a soft, damp cloth and a mild, non-abrasive cleaner. Avoid using harsh chemicals, abrasive sponges, or cleaners containing alcohol, ammonia, or phosphoric acid, as these can damage the surface. Always rinse thoroughly with clean water after cleaning and dry with a soft cloth to prevent water spots.
• Czyszczenie aeratora: If water flow becomes weak or uneven, the aerator at the tip of the spout may be clogged with debris. Unscrew the aerator (usually by hand or with a coin), rinse it under running water, and gently clean any accumulated particles. Reattach the aerator securely.

Do czyszczenia produktu nie należy używać urządzeń czyszczących parą ani urządzeń wysokociśnieniowych.

Rozwiązywanie problemów

If you encounter issues with your basin mixer, refer to the following common problems and solutions:

• Niski przepływ wody:
  • Check if the main water supply valves are fully open.
  • Clean the aerator at the spout tip for any debris or mineral buildup (refer to Maintenance section).
  • Inspect the water supply lines for kinks or obstructions.
• Leaking from Spout or Handles:
  • Ensure all connections are properly tightened. Do not overtighten.
  • If leaking persists, internal seals or cartridges may need replacement. This typically requires professional assistance.
• Niestabilna temperatura wody:
  • Verify that both hot and cold water supplies are functioning correctly and are connected to the appropriate inlets.
  • Check for any blockages in the hot or cold water supply lines.

For persistent issues or problems not listed here, it is recommended to contact Hansgrohe customer support or a qualified plumber.

Specyfikacje

Informacje o gwarancji

Hansgrohe products are typically covered by a limited manufacturer's warranty. This warranty generally covers defects in material and workmanship under normal use and service.

For specific warranty terms and conditions applicable to your Axor Citterio 3-Hole Wall-Mounted Basin Mixer (Model 39315000), including duration and coverage details, please refer to the official Hansgrohe website or the warranty documentation included with your purchase. Proof of purchase may be required for warranty claims.

Obsługa klienta

For further assistance, technical support, or to inquire about replacement parts for your Hansgrohe Axor Citterio 3-Hole Wall-Mounted Basin Mixer (Model 39315000), please visit the official Hansgrohe webstronie lub skontaktuj się z działem obsługi klienta.

When contacting support, always provide your product model number (39315000) and a detailed description of the issue to facilitate a quicker resolution.

Hansgrohe Official Webstrona: www.hansgrohe-usa.pl (lub regionalny oddział Hansgrohe webteren)