National Hardware N213-454 9/16 Bright Brass Corner (4-Pack)

1. Koniec produktuview

The National Hardware N213-454 Bright Brass Corner is a decorative and protective hardware component designed for various applications. This product includes four 9/16 inch solid brass corner pieces with a bright brass finish, intended to enhance the appearance and protect the corners of furniture, boxes, cabinets, or other items. Each corner piece is pre-drilled for easy installation using the included screws.

Rysunek 1: Zbliżenie view of a single bright brass corner piece, showcasing its polished finish and pre-drilled screw holes.

2. Informacje dotyczące bezpieczeństwa

Please read and understand all instructions before installation. Exercise caution when handling small hardware components and using tools. Keep small parts, such as screws, out of reach of children to prevent choking hazards. Wear appropriate personal protective equipment, such as safety glasses, when drilling or driving screws.

3. Zawartość opakowania

Przed rozpoczęciem instalacji sprawdź, czy wszystkie komponenty są obecne:

• Four (4) National Hardware N213-454 Bright Brass Corner pieces
• Screws for installation (quantity sufficient for all corner pieces)

Figure 2: The retail packaging for the National Hardware N213-454 Bright Brass Corner 4-Pack, showing four corner pieces and included screws, with product dimensions and branding.

4. Konfiguracja i instalacja

These brass corners are designed for easy surface mounting. Follow these steps for proper installation:

1. Przygotuj powierzchnię: Ensure the corner of the item where the brass corner will be installed is clean, dry, and free from obstructions.
2. Position the Corner: Place one brass corner piece onto the desired corner of your item. Ensure it is flush and properly aligned.
3. Zaznacz otwory na śruby: Using a pencil or a fine marker, carefully mark the locations for the screw holes through the pre-drilled holes in the brass corner.
4. Pre-drill Pilot Holes (Recommended): For wood or composite materials, it is recommended to pre-drill small pilot holes at the marked locations. Use a drill bit slightly smaller than the diameter of the screw threads to prevent splitting the material.
5. Attach the Corner: Align the brass corner with the pilot holes (if drilled) or marked spots. Insert the provided screws into the holes and tighten them securely with a screwdriver. Do not overtighten, as this may strip the screw threads or damage the brass.
6. Powtarzać: Install the remaining brass corner pieces on other desired corners following the same procedure.

5. Zastosowanie

The National Hardware N213-454 Bright Brass Corners are suitable for a variety of applications, including:

• Adding a decorative accent to furniture, such as desks, tables, or chests.
• Protecting vulnerable corners of wooden boxes, cabinets, or drawers from impact and wear.
• Restoring or enhancing the appearance of antique or vintage-elementy.

6. Konserwacja

To maintain the bright brass finish and ensure longevity of your corner pieces:

• Czyszczenie: Wipe the brass corners periodically with a soft, dry cloth to remove dust and fingerprints. For more thorough cleaning, use a damp szmatkę z łagodnym mydłem i wodą, a następnie natychmiast wytrzeć do sucha czystą, miękką szmatką.
• Unikaj silnych środków chemicznych: Do not use abrasive cleaners, ammonia-based products, or harsh chemicals, as these can damage the brass finish.
• Polerowanie (Opcjonalne): If the brass begins to tarnish over time, a brass polish specifically designed for bright brass can be used. Follow the polish manufacturer's instructions carefully.

7. Rozwiązywanie Problemów

Jeżeli podczas instalacji lub użytkowania napotkasz problemy, weź pod uwagę następujące kwestie:

• Screws Not Holding: If screws are not holding securely, ensure pilot holes are not too large. For stripped holes, you may need to use slightly larger screws or fill the hole with wood filler and re-drill.
• Corner Not Flush: Check for any debris or unevenness on the surface of the item. Ensure the corner piece is properly aligned before tightening screws.
• Damage to Brass: Avoid using excessive force during installation or cleaning, which can scratch or dent the brass.

8. Specyfikacje

9. Gwarancja i wsparcie

This National Hardware product is covered by a manufacturer's warranty. For specific details regarding warranty coverage, terms, and conditions, please refer to the documentation included with your purchase or visit the official National Hardware website. For technical assistance or product support, please contact National Hardware customer service through their official channels.

Więcej informacji znajdziesz na stronie National Hardware Store.