1. Wprowadzenie
This manual provides essential information for the proper installation, operation, and maintenance of your Dayton Audio PA130-8 5-inch Full Range PA Driver. The PA130-8 is designed for use in small stage monitors and other PA applications, offering broad frequency coverage and accurate sound reproduction for vocals and instruments. Its robust construction ensures durability in various environments.
Rycina 1: Przód view of the PA130-8 driver, highlighting the cone and surround.
2. Funkcje produktu
- Designed for small stage monitors and new construction.
- Broad frequency coverage for clear vocal and instrument reproduction.
- Flat midrange response for balanced audio.
- Rugged construction including a steel frame, paper cone, treated cloth surround, vented pole piece, and a 20 oz. magnet.
3. Konfiguracja i instalacja
3.1 Rozpakowanie
Carefully remove the PA130-8 driver from its packaging. Inspect the driver for any signs of damage during transit. Retain the packaging for future transport or storage.
3.2 Montaż
The PA130-8 driver is designed for flush mounting. Ensure the enclosure has a baffle cutout diameter of 112 mm (4.41 inches). The driver features 4 mounting holes. Use appropriate screws and ensure a secure, airtight seal between the driver frame and the enclosure baffle to prevent air leaks that can degrade performance.
3.3 Okablowanie
Connect the speaker wires to the terminals on the rear of the driver. The positive (+) terminal is typically marked with a red dot or a larger tab, and the negative (-) terminal with a black dot or smaller tab. Ensure correct polarity when connecting to your amplifier or crossover network to maintain proper phase alignment within your audio system.
Rysunek 2: Tył view of the PA130-8 driver, showing the wiring terminals.
4. Działanie
Once installed and wired correctly, the PA130-8 driver operates as a component within your audio system. Ensure that the amplifier connected to the driver is capable of providing adequate power without exceeding the driver's maximum power handling capacity (100 watts peak, 50 watts RMS). Overdriving the speaker can lead to damage. Adjust volume levels gradually and monitor for any signs of distortion.
5. Konserwacja
The Dayton Audio PA130-8 driver requires minimal maintenance. Keep the speaker cone and surround free from dust and debris. Use a soft, dry cloth to gently clean the surfaces. Avoid applying excessive pressure or using liquid cleaners, which could damage the cone material or surround. Periodically inspect the mounting screws and wiring connections to ensure they remain secure.
6. Rozwiązywanie Problemów
6.1 Brak dźwięku
- Sprawdź połączenia: Verify that all speaker wires are securely connected to both the driver terminals and the amplifier/crossover outputs. Ensure correct polarity.
- AmpStatus: Potwierdź, że amplifier is powered on and functioning correctly. Check its input source and volume settings.
- Crossover Issues: If using a passive or active crossover, ensure it is correctly configured and receiving an audio signal.
6.2 Zniekształcony dźwięk
- Przekroczenie prędkości: Reduce the volume level from the amplifier. The driver may be receiving too much power, causing distortion.
- Luźne połączenia: Sprawdź wszystkie połączenia przewodów pod kątem luzu i korozji.
- Enclosure Leaks: Inspect the speaker mounting for any air leaks around the frame, which can cause buzzing or rattling sounds.
- Damaged Driver: If distortion persists at low volumes and with proper connections, the driver may be damaged.
7. Specyfikacje
| Parametr | Wartość |
|---|---|
| Średnica nominalna | 5 cali |
| Obsługa zasilania (RMS) | 50 watów |
| Power Handling (Max) | 100 watów |
| Impedancja | 8 omy |
| Wrażliwość | 88.2 dB przy 2.83 V/1 m |
| Odpowiedź częstotliwościowa | 90 - 15,000 Hz |
| Średnica cewki drgającej | 25 mm |
| Waga magnesu | 20 uncji. |
| Rezystancja DC (Re) | 7.1 omy |
| Indukcyjność cewki drgającej (Le) | 0.71 mH przy 1 kHz |
| Częstotliwość rezonansowa (Fs) | 83.4 Hz |
| Mechaniczne Q (Qms) | 3.21 |
| Elektromagnetyczne Q (Qes) | 0.6 |
| Razem Q (il.) | 0.51 |
| Diaphragm Mass Inc. Airload (Mms) | 6.8g |
| Podatność mechaniczna zawieszenia (Cms) | 0.54 mm/N |
| Surface Area Of Cone (Sd) | 73.9 cm² |
| Volume of Displacement (Vd) | 14.8 cm³ |
| Produkt BL (BL) | 6.44 tonometra |
| Zgodność Równoważna objętość (Vas) | 3.95 litrów |
| Maximum Linear Excursion (Xmax) | 2.0 mm |
| Cone / Diaphragm Material | Papierowy stożek |
| Materiał przestrzenny | Traktowana tkanina |
| Voice Coil Wire Material | Miedź |
| Była cewka głosowa | Aluminium |
| Basket/Frame Material | Stal |
| Materiał magnetyczny | Ferryt |
| Overall Outside Diameter | 132 mm (5.2 cali) |
| Całkowita głębokość | 67.5 mm (2.66 cali) |
| Średnica wycięcia przegrody | 112 mm (4.41 cali) |
| Otwory montażowe | 4 |
| Waga produktu | 2.63 funta |
8. Informacje o gwarancji
The Dayton Audio PA130-8 5" Full Range PA Driver comes with a limited warranty:
- Strony: 5 lat
- Praca: 5 lat
Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, refer to the official Dayton Audio webodwiedź witrynę lub skontaktuj się z działem obsługi klienta.
9. Wsparcie
For further assistance, technical support, or inquiries regarding your Dayton Audio PA130-8 driver, please visit the official Dayton Audio webodwiedź stronę internetową lub skontaktuj się z działem obsługi klienta. Więcej informacji i zasobów znajdziesz na stronie Dayton Audio Store.
