1. Wprowadzenie
This manual provides detailed instructions for the installation, operation, and maintenance of the NULKOMMA X098-AXC013 Brushless Motor Controller. This controller is designed as a key component for electric bicycle conversion kits, offering efficient power management and compatibility with 2HAO displays. Please read this manual thoroughly before installation and use to ensure optimal performance and safety.
2. Specyfikacje
The X098-AXC013 Brushless Motor Controller is engineered with the following technical specifications:
| Funkcja | Specyfikacja |
|---|---|
| Model | X098-AXC013 |
| Zasilacz | 24V/36V/48V |
| Znamionowy prąd roboczy | 6~25A |
| Maksymalny prąd roboczy | 30mA |
| Prąd upływu w stanie wyłączonym | |
| Temperatura pracy | -20℃ ~ 60℃ |
| Temperatura przechowywania | -30℃ ~ 70℃ |
| Wymiary (dł. x szer. x wys.) | 17 cm x 9 cm x 5 cm (w przybliżeniu) |
| Waga | 0.28 kg (około) |
3. Zawartość opakowania
Po otwarciu opakowania należy sprawdzić, czy wszystkie elementy są obecne i nieuszkodzone:
- 1 x NULKOMMA X098-AXC013 Brushless Motor Controller with integrated wiring harness
- (Additional accessories, if any, would be listed here by the seller)
4. Konfiguracja i instalacja
Ważny: This product is often customized. It is crucial to contact the seller immediately after placing your order to provide necessary information for accurate matching with your electric bicycle. Failure to do so may result in the product being produced to regular specifications, which might not be compatible with your setup.
Installation of the motor controller requires basic electrical knowledge and familiarity with e-bike components. If you are unsure, please seek professional assistance.
4.1 Środki ostrożności
- Przed przystąpieniem do prac instalacyjnych lub konserwacyjnych należy zawsze odłączyć akumulator.
- Aby zapobiec zwarciom, należy upewnić się, że wszystkie połączenia są solidne i właściwie zaizolowane.
- Zweryfikuj objętośćtage compatibility (24V/36V/48V) with your e-bike system before connecting.
- Unikaj narażania kontrolera na działanie wody lub ekstremalnych temperatur.
4.2 Schemat okablowania powyżejview
The controller features a variety of connectors for different e-bike components. Refer to the image below for a visual guide to the common connectors. Specific wiring details may vary based on your e-bike kit and display (e.g., 2HAO Display).
4.3 Ogólne kroki instalacji
- Zamontuj kontroler: Securely mount the controller in a protected area on your e-bike, away from direct moisture and physical impact. Ensure adequate ventilation.
- Podłącz przewody fazowe silnika: Connect the three thick wires from the controller to the corresponding motor phase wires (usually green, blue, yellow).
- Podłącz przewody czujnika Halla: Connect the smaller Hall sensor wires (typically 5 or 6 wires) from the controller to the motor's Hall sensor connector.
- Podłącz akumulator: Connect the main power wires (red for positive, black for negative) from the controller to your e-bike battery. Double-check polarity.
- Connect Display (2HAO): Connect the display cable from the controller to your 2HAO display unit.
- Podłącz przepustnicę: Podłącz kabel przepustnicy do wyznaczonego wejścia przepustnicy w kontrolerze.
- Podłącz dźwignie hamulca: Connect the brake lever cables (if applicable) to the controller's brake input. These typically cut power to the motor when brakes are applied.
- Connect Pedal Assist Sensor (PAS): If your e-bike has a PAS, connect its cable to the controller.
- Inne połączenia: Connect any other accessories such as lights, speed sensor, or cruise control if supported by your controller and e-bike system.
- Test wstępny: After all connections are made, double-check them. Reconnect the battery and perform a low-power test to ensure the motor, throttle, and display function correctly before riding.
5. Instrukcja obsługi
Once installed, the X098-AXC013 controller manages the power delivery to your e-bike motor based on your input from the throttle and pedal assist sensor, and information from the 2HAO display.
5.1 Włączanie/wyłączanie
- Włączanie: Turn on your e-bike battery, then press the power button on your 2HAO display. The display should illuminate, indicating the controller is active.
- Aby wyłączyć: Press and hold the power button on your 2HAO display until it turns off. Then, turn off your e-bike battery.
5.2 Using the Throttle
Gently twist the throttle to engage the motor. The amount of twist corresponds to the power output. Start slowly to get accustomed to the power delivery.
5.3 System wspomagania pedałowania (PAS)
If your e-bike is equipped with a PAS, the controller will provide motor assistance as you pedal. The level of assistance is typically adjustable via your 2HAO display.
5.4 Display Functions (2HAO)
Your 2HAO display will show important information such as speed, battery level, assist level, and potentially trip distance. Refer to your 2HAO display's specific manual for detailed operation and settings adjustments.
6. Konserwacja
Właściwa konserwacja gwarantuje długowieczność i niezawodną pracę sterownika silnika.
- Zachowaj czystość i suchość: Regularly wipe down the controller housing with a dry cloth. Avoid using water or cleaning solutions directly on the unit.
- Sprawdź połączenia: Periodically check all wiring connections for tightness and signs of wear or corrosion. Loose connections can lead to intermittent power or damage.
- Unikaj przegrzania: Ensure the controller has adequate airflow and is not covered, especially during prolonged use or in hot weather.
- Chroń przed uderzeniami: While durable, avoid dropping or subjecting the controller to heavy impacts.
7. Rozwiązywanie Problemów
If you encounter issues with your X098-AXC013 controller, refer to the following common problems and solutions:
| Problem | Możliwa przyczyna | Rozwiązanie |
|---|---|---|
| Silnik nie reaguje | Loose connections, low battery, faulty throttle/PAS, motor/controller issue. | Check all wiring connections. Ensure battery is charged. Test throttle/PAS if possible. If problem persists, consult a professional. |
| Wyświetlacz nie włącza się | Battery off, loose display cable, faulty display. | Ensure battery is on. Check display cable connection. Try another display if available. |
| Przerywana moc | Loose battery connection, damaged wiring, overheating. | Secure battery connections. Inspect wiring for damage. Allow controller to cool down. |
| Motor runs rough/noisy | Incorrect motor/Hall sensor wiring, motor damage. | Double-check motor phase and Hall sensor connections. If wiring is correct, motor may be damaged. |
If you are unable to resolve an issue using the troubleshooting guide, please contact customer support.
8. Wskazówki użytkownika
- Potwierdzenie personalizacji: As this is a customizable product, always confirm your specific e-bike parameters with the seller immediately after purchase to ensure the controller is configured correctly for your system.
- Weryfikacja okablowania: Before powering on, meticulously verify all wiring connections, especially the battery polarity and motor phase/Hall sensor wires, to prevent damage.
- Profesjonalna instalacja: If you lack experience with e-bike electronics, consider professional installation to avoid potential issues.
9. Gwarancja i wsparcie
NULKOMMA Direct Store is committed to providing quality products. For any questions or issues regarding your X098-AXC013 Brushless Motor Controller, please contact the seller directly through the platform where you made your purchase.
Informacje o gwarancji: Specific warranty terms and duration are provided by the seller at the time of purchase. Please retain your purchase records for warranty claims.
Obsługa klienta: For technical assistance, troubleshooting, or inquiries about product compatibility, please reach out to NULKOMMA Direct Store customer service. Provide your order number and a detailed description of the issue for prompt support.