SKYFAME Car Frame Fascia Adapter Kit

1. Wprowadzenie

This manual provides detailed instructions for the installation and configuration of the SKYFAME Car Frame Fascia Adapter Kit, designed to integrate an Android large screen intelligent car multimedia navigation system into compatible vehicles. The kit includes a frame part, a special wiring harness, and a CANbus decoding box.

2. Kompatybilne modele

• Honda Accord 10th Generation (2018-2022)
• Honda Inspire (2018-2022)

The frame is designed for adaptive host screen sizes of 9, 10, or 12.3 inches.

3. Składniki produktu

3.1 Frame Part

The frame is made from environment-friendly ABS plastic, designed for a 1:1 model fit with the original radio installation part. It facilitates the conversion to an Android large screen multimedia system. Set screws M3 × 8 self-tapping screws are used for assembly.

Nadview of the frame kit showing 12.3, 9, and 10 inch frame options with included wiring.

Szczegółowy views of the frame components, front and back.

3.2 Harness and Decoding Part

The special harness is designed for car audio and navigation systems, meeting standard pin definitions with a main power line interface of 16pin. It allows for plug-and-play installation without cutting original wires. The kit includes a CANbus protocol box for vehicle communication.

Wiring diagram for the Android head unit. Connections include: Radio antenna, SPDIF, USB, Canbus Box, Main power line (KEY1, REVERSE, BRAKE CTL, AUTO ANT, FR+, FR-, RR+, RR-, FL+, FL-, RL+, RL-), ACC, Battery +12V, Battery GND, Fuse, GPS navigation antenna, Reverse video input cable, 360 Reserve, and RCA cables.

4. Specyfikacje

4.1 Wymiary wyświetlacza

Dimensions for 9 inch big screen host: 229mm (9.1 inch) top width, 219mm (8.6 inch) bottom width, 131mm (5.2 inch) height.

Dimensions for 10 inch big screen host: 251mm (9.9 inch) top width, 241mm (9.5 inch) bottom width, 146mm (5.7 inch) height.

5. Konfiguracja i instalacja

Installation should ideally be performed by professionals or experienced individuals. It is recommended to update the latest MCU and configuration file when connecting to WiFi.

5.1 Fizyczna instalacja

1. Carefully remove the original radio and dashboard components from your vehicle.
2. Install the new Android head unit into the provided fascia frame.
3. Connect the special wiring harness to the Android head unit and the vehicle's existing wiring. Ensure all connections match the provided wiring diagram. The plug-to-plug installation requires no wire cutting.
4. Secure the new fascia frame with the Android head unit into the dashboard opening.

5.2 CANbus Protocol Box Configuration

After physical installation, the CANbus protocol box needs to be configured within the Android head unit's factory settings. The specific steps may vary slightly depending on the Android host's solution provider (e.g., Topway, xyauto, nowada, ftytek). Below are common configuration methods:

Method 1: Raise RuiZhi Technology

1. Go to 'Factory setup' and enter password '8888'.
   

   Accessing Factory Setup with password '8888'.
2. For protocol debugging, navigate to 'Parameter Settingsver2.7_20181022'. Options include 'Touch Settings', 'Help and feedback', 'Keylight Settings', 'Rotation knob setting', 'Application Settings', and 'Remove test fileS'.
   

   Protocol Debugging settings interface.

3. To print data, click 'begin' in the program debug interface.
   

   Initiating data print in program debug.

4. In the application interface, select 'My Car' for vehicle-specific settings.
   

   Selecting 'My Car' in the application interface.
5. For post-sale diagnosis and adjustment, navigate to the relevant section. You can scan a QR code to submit feedback and capture logs.
   

   Post-sale diagnosis and adjustment options.

6. Feedback suggestions can be turned off from the 'Feedback suggest' option.
   

   Option to disable feedback suggestions.

Method 2: Fang Yitong

1. Set up a Factory and enter the input password '3368'.
   

   Accessing Factory Setup with password '3368'.

2. Click to enter the 'Pre-vehicle agreement options'.
   

   Entering pre-vehicle agreement options.

3. Open the 'Original Car Agreement Information Printing' option.
   

   Enabling original car agreement information printing.

Method 3: Quizzad

1. Set up a factory by entering the password '8888'.
   

   Quizzad factory settings password entry.

2. Open 'Coordination and Debugging' within the factory settings. Ensure 'Protocol debugging' is enabled.
   

   Quizzad Coordination and Debugging interface.

Method 4: Inmot

1. Set up a factory and enter the input password '8317'.
   

   Inmot factory setup password entry.

2. Configure car settings under 'Car Configuration'.
   

   Inmot car configuration interface.
3. Proceed to 'Vehicle Setup'.
   

   Inmot vehicle setup interface.

4. Open the 'Serial Port Printing Terminal' for debugging.
   

   Inmot serial port printing terminal for diagnostics.

Method 5: Tengshi

1. In 'Settings', navigate to 'Railing setup' under 'Network and Internet'.
   

   Tengshi settings: 'Railing setup'.

2. Access 'On equipment' settings.
   

   Tengshi 'On equipment' settings.

3. Click the 'Gear Settings Icon' and enter the password '0129'.
   

   Tengshi gear settings password entry.

Method 6: Mount B

1. Set up a Factory and enter the password '123654'.
   

   Mount B factory settings password entry.

2. For diagnostic mode, click 'Canbus' and enter password '0001'.
   

   Mount B diagnostic mode: Canbus selection.

Method 7: Jing'an

1. In 'Vehicle information', navigate to 'About one custom setting'.
   

   Jing'an vehicle information: custom setting.

2. To print serial port debugging information, open the 'Serial port debugging window'.
   

   Jing'an serial port debugging window.

After configuring the CANbus protocol box, it is crucial to restart the Android head unit for the settings to take effect.

6. Instrukcja obsługi

Once installed and configured, the Android head unit operates like a standard Android tablet, providing access to navigation, multimedia playback, radio, and other applications. Refer to your specific Android head unit's user manual for detailed operating instructions.

7. Konserwacja

• Utrzymuj ekran w czystości, używając miękkiej, niepozostawiającej włókien ściereczki. Unikaj środków czyszczących o działaniu ściernym.
• Ensure all connections remain secure. Periodically check for any loose wiring.
• Keep the software updated by connecting to Wi-Fi and checking for system updates.
• Unikaj wystawiania urządzenia na działanie ekstremalnych temperatur lub bezpośredniego światła słonecznego przez dłuższy czas.

8. Rozwiązywanie Problemów

• Brak zasilania: Check all power connections and the vehicle's fuse box. Ensure the main power line is correctly connected.
• Brak dźwięku: Verify audio output connections (RCA, speaker wires). Check the Android unit's volume settings and ensure the CANbus configuration for sound is correct.
• CANbus Functions Not Working (e.g., steering wheel controls): Re-check the CANbus protocol box configuration in the factory settings. Ensure the correct brand and model are selected. Update MCU and configuration files jeśli dostępne.
• Problemy z wyświetlaniem: Ensure the display cable is securely connected. If the screen is blank or flickering, try restarting the Android unit.
• Opóźnienie/zawieszenie się systemu: Perform a system restart. If issues persist, consider a factory reset (back up data first) or check for software updates.
• Trudności z instalacją: If self-installation is challenging, seek assistance from experienced professionals.

9. Wskazówki użytkownika

• Always ensure the vehicle's battery is disconnected before performing any electrical work.
• Take photos of original wiring before disconnecting anything to aid reassembly.
• When configuring the CANbus, if your specific solution provider is not listed, try common mainstream options or consult the seller.
• For optimal performance, keep your Android head unit's software updated.

10. Gwarancja i wsparcie

All products come with a one-year warranty in case of any defects. This warranty does not cover situations caused by abuse, human damage, accidental damage, water ingress, improper operation, or exceeding the prescribed scope of use.

For technical support or warranty claims, please contact your seller. Providing detailed information, including videos and pictures of any issues, can help expedite the support process.

Instrukcję obsługi w formacie PDF można również pobrać: View Instrukcja obsługi (PDF)