Wstęp
Thank you for choosing the Deerma X30 Steam Dual Axis Floor Scrubber. This manual provides essential information for the safe and efficient use, maintenance, and troubleshooting of your new appliance. Please read it thoroughly before first use and keep it for future reference.
Ważne informacje dotyczące bezpieczeństwa
Aby zmniejszyć ryzyko pożaru, porażenia prądem lub obrażeń ciała, należy zawsze przestrzegać podstawowych zasad bezpieczeństwa podczas korzystania z urządzeń elektrycznych.
- Przed użyciem urządzenia należy przeczytać całą instrukcję.
- Nie zanurzaj urządzenia w wodzie ani innych płynach.
- Nie używaj urządzenia, jeśli przewód zasilający lub wtyczka są uszkodzone.
- Trzymaj włosy, luźne ubrania, palce i inne części ciała z dala od otworów i ruchomych części.
- Używaj wyłącznie zgodnie z opisem w niniejszej instrukcji. Używaj wyłącznie akcesoriów zalecanych przez producenta.
- Odłączaj urządzenie od gniazdka, gdy nie jest używane oraz przed czyszczeniem.
- Nie stosować na mokrych powierzchniach, chyba że produkt jest specjalnie przeznaczony do czyszczenia na mokro.
- Nie używać urządzenia do zbierania cieczy łatwopalnych lub wybuchowych, takich jak benzyna, ani nie używać w miejscach, w których mogą one występować.
- Nie zbieraj palących się lub dymiących przedmiotów, np. papierosów, zapałek lub gorącego popiołu.
- Zachowaj szczególną ostrożność podczas czyszczenia schodów.
- Nie używać bez założonego worka na kurz i/lub filtrów.
- To urządzenie jest przeznaczone wyłącznie do użytku domowego.
Zawartość opakowania
Proszę sprawdzić zawartość opakowania po rozpakowaniu:
- Deerma X30 Main Unit
- Montaż uchwytu
- Zbiornik na czystą wodę
- Zbiornik na brudną wodę
- Scrubbing Rollers (pre-installed or separate)
- Przewód zasilający
- Instrukcja obsługi (ten dokument)
Organizować coś
- Złóż uchwyt: Insert the handle assembly into the main unit until it clicks securely into place. Ensure it is firmly attached.
-
Napełnij zbiornik czystej wody:
- Wyjmij zbiornik na czystą wodę z jednostki głównej.
- Open the tank cap and fill with clean tap water. For steam cleaning, distilled or demineralized water is recommended to prevent mineral buildup. Do not exceed the MAX fill line.
- Securely close the cap and reattach the tank to the main unit.
- Check Scrubbing Rollers: Ensure the scrubbing rollers are properly installed at the base of the unit. They should rotate freely.
- Podłącz zasilanie: Plug the power cord into a suitable electrical outlet. The appliance is equipped with a 5-meter line length for extended reach.
Instrukcja obsługi
- Włączanie: Press the power button located on the handle to turn on the scrubber. The indicator light will illuminate.
- Wybierz tryb (jeśli dotyczy): If your model has different cleaning modes (e.g., steam, scrub, or combined), select the desired mode using the controls on the handle.
-
Rozpocznij czyszczenie: Tilt the handle back to engage the scrubbing rollers. The dual-axis design allows for efficient cleaning and maneuverability. Guide the scrubber slowly over the floor surface.
Figure 2: Scrubber in action, demonstrating effective cleaning on a wooden floor. - Funkcja pary: If using the steam function, allow a few moments for the unit to heat up and produce steam before beginning to clean. The steam helps to sanitize and loosen stubborn dirt.
-
Dirty Water Collection: As you clean, the dirty water will be collected in the dirty water tank. Monitor the tank and empty it when it reaches the MAX fill line.
Figure 3: Diagram illustrating the clean water supply and dirty water recovery system. - Wyłączone: When finished cleaning, press the power button to turn off the appliance. Unplug the power cord from the outlet.
Konserwacja
Regular maintenance ensures optimal performance and extends the life of your Deerma X30.
- Opróżnij i wyczyść zbiornik na brudną wodę: After each use, remove the dirty water tank, empty its contents, and rinse thoroughly with clean water. Allow it to air dry before reattaching.
-
Clean Scrubbing Rollers:
- Remove the scrubbing rollers from the base of the unit.
- Rinse them under running water to remove any debris or residue.
- For deeper cleaning, they can be washed with mild soap and water.
- Ensure rollers are completely dry before re-installing to prevent mildew.
Figure 4: Close-up of the scrubber base, showing the scrubbing rollers for maintenance. - Self-Cleaning Function (if available): Some models may feature a self-cleaning mode. Refer to the specific instructions for activating and using this feature.
- Wyczyść jednostkę główną: Przetrzyj zewnętrzną część jednostki głównej za pomocąamp płótno. Nie używaj ostrych środków chemicznych ani ściernych środków czyszczących.
- Przechowuj prawidłowo: Store the scrubber in an upright position in a dry, safe place.
Rozwiązywanie problemów
| Problem | Możliwa przyczyna | Rozwiązanie |
|---|---|---|
| Urządzenie nie włącza się. |
|
|
| Słaba skuteczność czyszczenia. |
|
|
| Brak produkcji pary. |
|
|
Specyfikacje
| Funkcja | Szczegół |
|---|---|
| Model | X30 |
| Typ | Steam Dual Axis Floor Scrubber |
| Częstotliwość znamionowa | 50 Hz |
| Długość przewodu zasilającego | 5 metrów |
| Obszar zastosowania | More than 150 square meters |
| Endurance (Continuous Operation) | 0-60 minut |
| Attraction (Suction Power) | 1000 ~ 1499 Pa |
| Wyświetlacz ciekłokrystaliczny | Bez |
| Fixed Type (for rollers) | Zapięcie na rzep |
| Pochodzenie | Chiny kontynentalne |
Porady użytkownika
- For best results, pre-vacuum heavily soiled areas before using the scrubber to remove loose debris.
- Always use distilled or demineralized water for the steam function to prevent mineral buildup and extend the life of the appliance.
- Regularly check and clean the scrubbing rollers to maintain optimal cleaning efficiency.
- Empty the dirty water tank immediately after use to prevent odors and bacterial growth.
- The 5-meter power cord provides ample reach, but be mindful of its placement to avoid tripping hazards during operation.
Gwarancja i wsparcie
For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or contact the manufacturer's customer service directly. Keep your proof of purchase for warranty claims.
