Digital Clock Car Tire Pressure Monitoring System (TPMS)

1. Koniec produktuview

The Digital Clock Car Tire Pressure Monitoring System (TPMS) is designed to enhance driving safety by providing real-time monitoring of your vehicle's tire pressure and temperature. It features a colorful LCD digital display, solar and USB charging capabilities, and intelligent alarm functions for abnormal tire conditions.

1.1 Zawartość opakowania

Przed instalacją należy sprawdzić, czy wszystkie komponenty są obecne:

• TPMS Display Unit
• 4 Czujniki zewnętrzne
• Kabel ładujący USB
• Klucz
• Anti-theft Nuts
• Podkładka silikonowa
• Instrukcja obsługi

2. Konfiguracja i instalacja

2.1 Display Unit Placement and Charging

Place the TPMS display unit on your dashboard in a position that does not obstruct your view of the road. The unit is designed for solar charging but can also be charged via USB.

• **Solar Charging:** Ensure the solar panel on the display unit is exposed to sunlight for continuous charging.
• **USB Charging:** Connect the provided USB cable to the display unit and a car charger or USB port for charging, especially in low light conditions.

2.2 Instalacja czujnika zewnętrznego

The system uses external sensors for easy installation. Follow these steps to install the sensors on your tires:

1. Screw out the original valve cap from the tire valve.
2. Install an anti-theft washer onto the valve stem first.
3. Rotate the anti-theft nut counterclockwise onto the valve stem.
4. Screw the external sensor onto the valve stem. Ensure it is tightened securely.
5. Use the provided wrench to tighten the anti-theft washer by turning it anticlockwise against the sensor.
6. Check for air leakage around the sensor using soapy water.

The system features an intelligent shock boot, meaning it will automatically turn on when the car is moving, so there is no need to manually power it on or off.

3. Instrukcja obsługi

3.1 Funkcje jednostki wyświetlającej

The colorful LCD digital display provides clear, real-time information about your tires. The display unit includes buttons for selection and power/up functions.

• **Real-time Monitoring:** The display shows the pressure and temperature for all four tires simultaneously.
• **Digital Clock Display:** The unit also features a digital clock.
• **Unit Change:** You can switch between PSI and Bar for pressure readings, and between °C and °F for temperature readings. Refer to the on-screen menu for this setting.

3.2 funkcji alarmu

The system provides various alarms to alert you to abnormal tire conditions, ensuring driving safety.

• **Leak/Low Pressure Alarm:** The icon flashes, and the corresponding tire's pressure value flashes.
• **High Pressure Alarm:** The icon flashes, and the corresponding tire's pressure value flashes.
• **High Temperature Alarm:** The icon flashes, and the corresponding tire's temperature value flashes.
• **Sensor Battery Run Down:** The icon blinks, and the low battery icon blinks for the affected sensor.
• **Buzzer Alarm:** An audible "di! di! di!" sound accompanies visual alarms.

3.3 High Temperature Protection

The system is equipped with automatic high temperature protection:

• Above 65°C: Charging will stop.
• Above 85°C: Self-protection mode turns on.
• If temperature is too high, ventilate or turn on the air conditioner to return to normal monitoring.

4. Konserwacja

4.1 Ogólna opieka

• Clean the display unit and sensors regularly with a soft, dry cloth. Avoid using harsh chemicals.
• Ensure the solar panel on the display unit is clean for efficient charging.
• The brass valve core of the sensors is resistant to harsh environments, and the sensors are IPX7 waterproof, providing durability against various weather conditions.

4.2 External Sensor Battery Replacement

When a sensor battery runs low, it will trigger an alarm. Replace the battery by following these steps:

1. Loosen the six-angle nuts on the sensor.
2. Spin out the sensor from the valve stem.
3. Zdjąć uszczelkę demontażową.
4. Use the wrench to rotate the sensor counterclockwise to open it.
5. Wymień na nową baterię CR1632.
6. Reassemble the sensor and reinstall it on the tire, following the installation steps in Section 2.2.

5. Rozwiązywanie Problemów

If you encounter any issues with your TPMS, refer to the following common problems and solutions:

6. Specyfikacje

7. Wskazówki użytkownika

• **Solar Panel Orientation:** For optimal solar charging, ensure the display unit's solar panel is facing upwards and exposed to direct sunlight as much as possible.
• **Automatic Operation:** The system is designed to automatically activate when your vehicle starts moving, eliminating the need for manual power cycling.
• **Sensor Type:** This system comes with external sensors, which are generally easier to install and replace compared to internal sensors.
• **Regular Checks:** Even with the TPMS, it's good practice to manually check your tire pressure periodically with a reliable gauge.

8. Gwarancja i wsparcie

For any malfunctions, missing accessories, or other product-related inquiries, please contact the after-sales service or the original purchase channel. Do not attempt to disassemble components arbitrarily, as this may void your warranty.

A comprehensive user manual in PDF format is available for download and further details:

View Instrukcja obsługi (PDF)

9. Ostrzeżenia i informacje dotyczące bezpieczeństwa

• Nie stosować w damp środowiska.
• Przed użyciem sprawdź produkt pod kątem uszkodzeń.
• Przechowywać w miejscu niedostępnym dla dzieci.
• Avoid overloading the system.
• Do not disassemble components arbitrarily.