ANENG A3016 Digital Car Voltage Tester Pen Multimeter Instruction Manual

Wstęp

The ANENG A3016 is a versatile pen-type digital multimeter designed for a wide range of electrical measurements, particularly useful for automotive and household electrical maintenance. It features non-contact AC/DC voltage detection, resistance measurement, continuity testing, phase sequence detection, and line breakpoint lookup. Its compact design, built-in rechargeable battery, and backlit LCD screen make it a convenient and efficient tool for professionals and DIY enthusiasts.

This image shows the ANENG A3016 multimeter along with its test leads, a screwdriver, the user manual, and its packaging box, highlighting its core functionalities like NCV voltagwykrywanie prądu przemiennego/stałego,tage, resistance, and phase sequence detection.

Zawartość opakowania

Po otrzymaniu przesyłki sprawdź jej zawartość, aby upewnić się, że znajdują się w niej wszystkie elementy:

• Pudełko opakowaniowe * 1
• Instrukcja obsługi * 1
• Pen multimeter * 1
• Spring test pen line * 1
• Spring clip * 1
• Kabel ładujący * 1
• Phillips screwdriver * 1

This image displays all the components included in the ANENG A3016 package, ensuring users can verify their contents.

Organizować coś

Ładowanie akumulatora

The ANENG A3016 features a built-in 500mA rechargeable lithium battery, eliminating the need for frequent battery replacement. To charge the device:

1. Znajdź port ładowania na urządzeniu.
2. Connect the provided charging cable to the multimeter and a suitable USB power source.
3. A red indicator light will illuminate, indicating that the device is charging.
4. The light will turn green once the battery is fully charged.

This image illustrates the charging process of the ANENG A3016's 500mA lithium battery, showing the red light when charging and the green light when fully charged.

This image further details the direct charge lithium battery, emphasizing its convenience and the location of the charging port and indicator lights.

Podłączanie przewodów testowych

For certain measurements, you will need to connect the spring test pen line and spring clip:

1. Insert the spring test pen line into the COM jack on the multimeter.
2. Attach the spring clip to the other end of the spring test pen line.
3. Przed użyciem upewnij się, że połączenia są pewne.

This image showcases the high rebound spring wire, highlighting its telescopic and anti-stretching material, which allows it to be pulled to about 185 cm (72.8 inches) for the pen and 189 cm (74.4 inches) for the clip.

Instrukcja obsługi

The ANENG A3016 features automatic recognition for most measurements, simplifying operation. Long press the power button for 2 seconds to turn the device on/off. Short press to turn on the backlight.

General Measurement Functions

Ten obraz zapewnia wizualny podglądview of the various measurement functions, including AC/DC voltage, continuity, resistance, live/neutral line detection, NCV, and phase sequence.

Szczegółowy view of the integrated functions, showing how to use the pen for AC/DC voltage, on-off beep, resistance, live/naught line, NCV sensing, and phase sequence measurements.

AC/DC Objętośćtage Pomiar

The multimeter automatically identifies AC/DC voltage. Simply touch the probe to the circuit or component to measure. The display will show the voltage wartość. Dla example, household AC voltage is typically around 220V, and a car battery DC voltage wynosi około 12V.

Pomiar rezystancji

To measure resistance, contact both ends of the resistor with the multimeter's probe and the spring clip. The resistance value will be displayed.

Continuity (On-Off Beep)

For continuity testing, if the resistance of the tested line is less than 50Ω, the buzzer will sound, and the backlight will turn bright red. This is useful for checking fuses or circuit integrity.

This image demonstrates how to use the ANENG A3016 for automotive fuse measurement, indicating its suitability for circuit detection and troubleshooting in vehicles.

Wykrywanie kolejności faz

Switch the multimeter to the phase sequence gear. Touch the probe to the three positions (A, B, C lines) of a three-phase electricity source in turn. The device will determine whether the phase sequence is forward or reverse.

This image illustrates the phase sequence detection feature, showing how the multimeter identifies forward or reverse phase in three-phase electrical systems.

A step-by-step visual guide on performing phase sequence detection, demonstrating the interaction with the A, B, and C lines of a three-phase system.

Naught/Live Line Detection

The multimeter can intelligently identify zero (neutral) and live wires. A red screen with a beep indicates a live wire, while a green screen without a beep indicates a neutral wire.

This image demonstrates the multimeter's ability to detect live and neutral lines, showing the distinct visual and auditory feedback for each.

Tom NCVtage Induction (Non-Contact Voltage)

In NCV mode, the multimeter detects AC voltage without direct contact. It will beep and the red screen will light up when AC voltage is sensed. You can switch between high (HI) and low (LO) sensitivity depending on the usage requirements.

This image explains the NCV voltage induction feature, showing how the device indicates weak (green backlight) and strong (red backlight) electric fields, and how to adjust between high and low sensitivity.

Wyszukiwanie punktów przerwania wiersza

To locate a breakpoint in a wire, use the NCV mode. Move the multimeter along the wire; the breakpoint is where the beep stops, indicating a loss of signal.

This image visually explains the line breakpoint lookup function, demonstrating how the multimeter can identify a break in a wire by detecting the absence of an electrical signal.

Konserwacja

• Always wear a protective cover on the probe when the multimeter is not in use to prevent accidental injury.
• Utrzymuj urządzenie w czystości i suchości. Użyj miękkiego, damp Do czyszczenia należy używać ściereczki; nie należy używać środków czyszczących o właściwościach ściernych ani rozpuszczalników.
• Store the multimeter in a safe place, away from extreme temperatures, humidity, and direct sunlight.

Rozwiązywanie problemów

• Urządzenie nie włącza się: Ensure the battery is charged. Connect the charging cable and check the indicator light.
• Screen not visible in dark environments: Short press the power button to activate the high-definition LCD backlight.
• Niedokładne odczyty: Ensure proper contact with the circuit/component. Check if the test leads are securely connected.
• Automatyczne wyłączanie: The device has an automatic shutdown feature if there is no operation after 15 minutes to conserve battery. Simply turn it back on.
• Monit o niskim poborze mocy: If the battery is low, the device will provide a low power prompt. Recharge the battery as soon as possible.

Specyfikacje

The following table outlines the technical specifications for the ANENG A3016 Digital Car Voltage Tester Pen Multimeter:

Uwaga: Podane parametry mają charakter wyłącznie poglądowy, a wiążące są rzeczywiste pomiary konkretnego sprzętu.

This image presents a detailed table of the ANENG A3016's technical indicators, including measurement ranges, resolutions, and precision for various functions.

Ten obraz zapewnia kompleksowy przeglądview of the product's physical dimensions and reiterates the technical specifications, including details about the positive input/nib probe, LCD display, data hold key, H/L LIVE key, function switch key, power button, COM jack, and lithium battery direct charging.

Porady użytkownika

• Kontrola podświetlenia: The backlight can be turned on with a short press of the power button. It does not stay on permanently to conserve battery, so activate it as needed in dark environments.
• Zastosowanie w motoryzacji: The long, flexible spring wire and clip are particularly useful for reaching various points in a car's electrical system, such as battery terminals and fuse boxes.
• Bezpieczeństwo przede wszystkim: Always use the protective cover on the probe when not actively measuring to prevent accidental injury.

Gwarancja i wsparcie

For any questions regarding the use of the product, quality issues, replacement or refund requests, or if the product is not operating properly, please contact ANENG customer service. Our professional after-sales team is dedicated to providing satisfactory solutions in a timely manner.

If you encounter operational problems or do not understand how to use the product, ANENG customer service can provide assistance. Please note that this product requires a certain degree of electrical knowledge for safe and proper use. Pay attention to the use of certain operating procedures, select the correct measurement method, and avoid dangerous events. Improper use may result in damage to the product, which may not be covered under warranty if deemed man-made damage.

This image outlines the various aspects of ANENG's customer support, including contact for after-sales questions, handling quality issues, replacement/refund procedures, assistance with product operation, and warnings regarding artificially damaged products.