XOSS X2 Pro Chest Strap Heart Rate Sensor User Manual

1. Wprowadzenie

The XOSS X2 Pro Heart Rate Sensor is a wireless chest strap designed to accurately monitor your heart rate during various fitness activities. Featuring dual-mode protocol support (Bluetooth & ANT+), IPX7 waterproofing, and independent data storage, it offers a reliable solution for tracking your health and performance. This manual provides essential information for the proper setup, operation, and maintenance of your device.

2. Informacje i środki ostrożności dotyczące bezpieczeństwa

Warning: To avoid danger of suffocation, keep this bag away from babies and children. Do not use this bag in cribs, beds, carriages, or playpens. This bag is not a toy.

Środki ostrożności dotyczące użytkowania produktu:

• Do not use acidic or alkaline solvents (such as rust removers and diluents) to clean accessories to avoid corrosion and damage. It is recommended to use neutral detergents.
• Avoid direct flushing of accessory connections and circuit components with high-pressure water flow to prevent water ingress, rust, or short circuit faults.
• Do not expose the accessories to strong sunlight for a long time to avoid material aging; Store in a dry and ventilated place, away from corrosive gases.
• Natural wear and performance degradation caused by normal use are not covered by the warranty and require regular inspection and replacement of worn parts.

3. Zawartość opakowania

Prosimy o dokładne sprawdzenie zawartości opakowania. Jeśli brakuje któregokolwiek z elementów lub jest on uszkodzony, prosimy o kontakt ze sprzedawcą.

• XOSS X2 Pro Heart Rate Sensor (main unit)
• Regulowany pasek na klatkę piersiową
• Kabel ładujący (USB)
• User Manual (this document, also available as PDF: Instrukcja obsługi (PDF))

4. Konfiguracja

4.1 Ładowanie urządzenia

The X2 Pro features a built-in rechargeable battery. Before first use, ensure the device is fully charged. Connect the charging cable to the sensor and a USB power source. The green indicator light will illuminate when the device is fully charged. A full charge provides approximately 30 days of battery life, based on 1 hour of usage per day.

4.2 Noszenie pasa piersiowego

1. Moisten the electrode areas on the back of the chest strap with water or electrode gel to ensure good contact with your skin.
2. Attach the XOSS X2 Pro sensor to the chest strap.
3. Place the chest strap around your chest, just below your pectoral muscles. The sensor should be centered on your chest.
4. Adjust the strap to a comfortable but snug fit. It should not be too tight to restrict breathing, nor too loose to slip during activity.

4.3 Parowanie z urządzeniami

The X2 Pro supports both Bluetooth and ANT+ protocols, allowing compatibility with a wide range of sports equipment and applications.

• For Bluetooth Pairing:
  1. Ensure Bluetooth is enabled on your smartphone, cycling computer, or other compatible device.
  2. Wear the heart rate sensor as described above.
  3. Open your fitness app or device settings and search for new sensors.
  4. Select "XOSS X2 Pro" from the list of available devices to pair.
• For ANT+ Pairing:
  1. Ensure ANT+ is enabled on your cycling computer, GPS watch, or other compatible device.
  2. Wear the heart rate sensor.
  3. On your ANT+ device, navigate to the sensor pairing menu and search for heart rate sensors.
  4. The X2 Pro should appear and connect automatically or after selection.

5. Instrukcja obsługi

5.1 Monitorowanie tętna

Once paired and worn correctly, the X2 Pro will automatically begin transmitting your heart rate data. The sensor uses the micro-voltage signals generated by your heartbeat to provide accurate heart rate values to your connected device or app.

5.2 Niezależne przechowywanie danych

The X2 Pro features an independent memory storage function, allowing it to record approximately 48 hours of exercise data even without being connected to an external device. This is ideal for activities where carrying a phone or bike computer is inconvenient. If the storage capacity is exceeded, new data will automatically overwrite the oldest data. The recording duration may be affected by temperature and environmental conditions.

5.3 Speed/Distance Estimation

By activating the pedometer switch, the X2 Pro can record your step frequency. It then estimates your distance and speed based on this step frequency, along with your pre-set height and gender information in the connected app.

5.4 Oszacowanie kalorii

The X2 Pro provides a calorie estimation function, allowing you to see your exercise consumption at a glance. This feature helps you track your energy expenditure during workouts.

5.5 Heart Rate Warning Alert

For safe exercise, the heart rate monitor can issue a warning tone if your heart rate reaches a pre-set warning value. This feature can be manually turned on or off via the connected application.

6. Konserwacja

• After each use, rinse the chest strap with clean water and hang it to dry. Do not machine wash or tumble dry.
• Wyczyść jednostkę czujnika miękką,amp cloth. Do not use abrasive cleaners or chemical solvents.
• Store the device in a dry and well-ventilated place, away from direct sunlight and corrosive gases.
• Regularly check the chest strap for signs of wear and tear. Replace if damaged to ensure accurate readings.
• Przed ładowaniem upewnij się, że port ładowania jest czysty i suchy.

7. Rozwiązywanie Problemów

7.1 Brak odczytu tętna

• Ensure the electrode areas on the chest strap are sufficiently moistened.
• Sprawdź, czy czujnik jest prawidłowo przymocowany do paska i odpowiednio umiejscowiony na klatce piersiowej.
• Verify that the sensor's battery is charged.
• Confirm that the sensor is properly paired with your receiving device (Bluetooth or ANT+).
• Spróbuj ponownie sparować czujnik z urządzeniem.

7.2 Inconsistent or Erratic Readings

• Ensure the chest strap is snug but comfortable, preventing movement during activity.
• Ponownie zwilż elektrody.
• Unikaj źródeł silnych zakłóceń elektromagnetycznych.
• Check for any damage to the chest strap or sensor unit.

7.3 Problemy z łącznością

• Ensure your receiving device is within range of the sensor.
• Turn off and on Bluetooth/ANT+ on your receiving device.
• Restart both the sensor (if applicable, by removing and reattaching to the strap) and your receiving device.
• Check for firmware updates for your receiving device or the XOSS app.

8. Specyfikacje

9. Wskazówki użytkownika

• Zwilż elektrody: Always moisten the electrode areas on the chest strap before wearing it to ensure optimal signal transmission and accurate heart rate readings.
• Dopasowanie do: A snug fit is crucial for accuracy. The strap should be tight enough not to slip during exercise but not so tight as to cause discomfort or restrict breathing.
• Pielęgnacja po treningu: Rinse the strap after each use to remove sweat and salt, which can degrade the material and affect conductivity over time.
• Integracja aplikacji: Utilize the dedicated XOSS app or other compatible fitness apps to get the most out of features like heart rate zone training, data analysis, and warning alerts.
• Oszczędność baterii: If not using the independent storage, ensure the sensor is disconnected from the strap when not in use to conserve battery.

10. Gwarancja i wsparcie

For detailed warranty information, please refer to the official XOSS website or the comprehensive user manual PDF provided with your product. If you encounter any issues not covered in this manual, please contact XOSS customer support or your retailer for assistance.

Pełną instrukcję obsługi w formacie PDF znajdziesz tutaj: XOSS X2 Pro User Manual (PDF)