1. Wprowadzenie
This manual provides detailed instructions for the installation, operation, and maintenance of your Rollerhouses DC2700 (1-channel) or DC2702 (15-channel) RF remote control for motorized roller shades. Please read this manual thoroughly before using the product to ensure proper function and longevity.
2. Informacje dotyczące bezpieczeństwa
- Trzymaj pilota z dala od wody i wilgoci.
- Nie wystawiaj pilota na bezpośrednie działanie promieni słonecznych ani ekstremalnych temperatur.
- Nie próbuj samodzielnie demontować ani naprawiać pilota. W celu uzyskania pomocy skontaktuj się z wykwalifikowanym personelem.
- Przechowuj baterie w miejscu niedostępnym dla dzieci.
3. Koniec produktuview
The Rollerhouses DC2700 and DC2702 are RF (Radio Frequency) remote controls designed to operate motorized roller shades. The DC2700 offers single-channel control, while the DC2702 provides multi-channel control for up to 15 groups of shades.
3.1. Zawartość opakowania
- 1 x DC2702/DC2700 RF Controller
- 1 x Back Holder (for wall mounting)
3.2. Remote Control Layout
4. Konfiguracja
4.1. Instalacja baterii
The remote control comes with a pre-installed 3V CR2450 button battery. If replacement is needed, follow these steps:
- Remove the remote cover by sliding it downwards in the direction of the arrow.
- Ostrożnie wyjmij starą baterię CR2450.
- Insert the new 3V CR2450 button battery, ensuring correct polarity.
- Close the back cover by sliding it back into place until it clicks securely.
4.2. Montaż na ścianie
The remote control includes a back holder for convenient wall mounting. After installation, you can easily hang the remote control on the wall for easy access.
5. Instrukcja obsługi
5.1. Basic Shade Control
Use the primary buttons to control your motorized shades:
- UP button (▲): Podnosi cień.
- DOWN button (▼): Opuszcza cień.
- STOP button (−): Zatrzymuje roletę w jej bieżącej pozycji.
5.2. Channel Selection (DC2702 - 15 Channel Controller)
The DC2702 allows you to control up to 15 individual shades or groups of shades. Use the P1- and P1+ buttons to cycle through the channels. The selected channel number will be displayed on the LED screen. Once the desired channel is selected, use the UP, DOWN, and STOP buttons to control the corresponding shade(s).
5.3. Pairing with Motorized Shades
The pairing process typically involves a specific sequence of button presses on both the remote and the shade motor. Refer to your motorized shade's instruction manual for detailed pairing instructions. Generally, it involves:
- Putting the shade motor into pairing mode (often by pressing a button on the motor itself).
- Pressing a specific button or sequence on the remote control to send the pairing signal.
Notatka: This remote is a universal controller for shade motors. Ensure the shape and frequency (433.92MHz) are compatible if replacing with other brands, otherwise it may not work or pair.
6. Konserwacja
The primary maintenance for your remote control is battery replacement. Refer to Section 4.1 for detailed instructions on how to replace the 3V CR2450 button battery. Clean the remote with a soft, dry cloth. Do not use abrasive cleaners or solvents.
7. Rozwiązywanie Problemów
- Pilot nie odpowiada: Check the battery. Replace if necessary (see Section 4.1). Ensure you are within the operating range (up to 115 feet indoors, 655 feet in open field).
- Shades not moving: Verify the remote is paired correctly with the shade motor. Check the shade motor's power supply.
- 15-channel remote not controlling the correct shade: Ensure you have selected the correct channel using the P1- and P1+ buttons.
- Ingerencja: If experiencing intermittent control, ensure there are no strong RF interference sources nearby.
8. Specyfikacje
| Funkcja | Specyfikacja |
|---|---|
| Numery modeli | DC2700 (1 Channel), DC2702 (15 Channel) |
| Nazwa marki | Rollerhouse'y |
| Częstotliwość | 433.92MHz |
| Moc promieniowania | ≤10mW |
| Temperatura pracy | -10°C do +50°C |
| Typ baterii | 3V CR2450 Button Battery (Included) |
| Tomtage | 5V/2A (for power source, not battery) |
| Cotage | 1W |
| Wymiary (w przybliżeniu) | Length: 5.12 inches, Width: 1.77 inches, Thickness: 0.433 inches |
| Pochodzenie | Chiny kontynentalne |
8.1. Non-Compatible Brands
The remote control is NOT compatible with the following brands:
- Somfy brand Shade
- Graber and Bali Shades
- Sivola Triathlon Shades
- Rollease Acmeda shade motors
- Tucson DC1602b
- Lutron's Sivola QED
- Levelor motorized sheer shades
- Select blinds
- 3 day blinds
9. Wskazówki użytkownika
- For optimal performance, ensure a clear line of sight between the remote and the shade motor, especially in environments with potential signal obstructions.
- When controlling multiple shades with the 15-channel remote, label your channels for easy identification.
- Keep a spare CR2450 battery on hand for quick replacement.
10. Wsparcie
For further assistance or inquiries, please contact Rollerhouses customer support. Keep your product model number (DC2700 or DC2702) handy when contacting support.
