Geevon Indoor Outdoor Thermometer with 3 Remote Sensors (Model 228646)

1. Koniec produktuview

The Geevon Wireless Indoor Outdoor Thermometer with 3 Remote Sensors provides accurate real-time temperature and humidity readings for up to four locations. Its large LCD display shows current conditions, 24-hour Max/Min records, and trend arrows. The integrated Comfort Indicator helps you maintain optimal living conditions. This system includes one main display unit and three wireless remote sensors, offering a transmission range of up to 200 feet (60 meters).

Figure 1: Main display unit highlighting key features like temperature/humidity, comfort level, Max/Min records, temperature trends, C/F selector, temperature/humidity alert, and multi-channel display.

Zawartość opakowania:

• 1 x Główny wyświetlacz
• 3 x bezprzewodowe czujniki zdalne
• 1 x USB Cable (for main unit power, though it's battery operated)
• 1 x Instrukcja obsługi

2. Instrukcje konfiguracji

2.1 Instalacja baterii

The main display unit requires 2 AA batteries, and each remote sensor requires 2 AAA batteries (not included). Ensure correct polarity when inserting batteries.

1. Open the battery compartment cover on the back of the main display unit.
2. Włóż 2 baterii AA, zwracając uwagę na prawidłową biegunowość (+/-).
3. Załóż z powrotem pokrywę komory baterii.
4. For each remote sensor, open the battery compartment cover.
5. Włóż 2 baterie AAA, zwracając uwagę na prawidłową biegunowość (+/-).
6. Załóż z powrotem pokrywę komory baterii.

Figure 2: Illustration of battery installation for the main unit and remote sensors.

2.2 Wybór kanału czujnika

Before placing the remote sensors, assign a unique channel (1, 2, or 3) to each sensor using the switch inside its battery compartment. This allows the main unit to distinguish between the different sensor readings.

2.3 Parowanie czujników z jednostką główną

Once batteries are installed and channels are set, the main unit will automatically search for and connect to the remote sensors. This process may take a few minutes. Ensure all sensors are within range during initial setup.

Figure 3: The main display unit receiving data from three remote sensors, illustrating multi-location monitoring.

2.4 Wytyczne dotyczące rozmieszczenia

• Jednostka główna: Place the main unit indoors on a flat surface using its integrated stand or mount it on a wall using the hang hole. Avoid placing it near heat sources or direct sunlight.
• Zdalne czujniki: Position remote sensors in desired outdoor or indoor locations. For outdoor use, place sensors in a shaded, dry area, protected from direct sunlight and rain, to ensure accurate readings and prolong battery life. The maximum transmission range is 200 feet (60 meters) in open air.

Figure 4: The main unit and remote sensor showing tabletop stand and wall mount options.

Rysunek 5: Example of proper outdoor sensor placement, protected from direct elements.

3. Instrukcja obsługi

3.1 Wyświetl ponadview

The large LCD screen displays indoor temperature and humidity, along with readings from the three remote sensors (Channel 1, 2, 3). Each reading includes current temperature, humidity, and trend arrows.

Rysunek 6: Szczegółowy view of the display, including comfort icons and trend arrows.

3.2 Wybór jednostki temperatury (°C/°F)

Press the "MEM/▼" button to switch between Celsius (°C) and Fahrenheit (°F) temperature units.

3.3 Rekordy maks./min.

The device automatically records the maximum and minimum temperature and humidity values over the past 24 hours. Press the "MEM/▼" button repeatedly to cycle through current, maximum (MAX), and minimum (MIN) readings for each channel. These records update every 24 hours.

3.4 Wskaźnik komfortu

The display features a comfort indicator icon to quickly assess indoor conditions:

• COM (Comfortable): 40% ≤ Humidity ≤ 70% & 20°C ≤ Temperature ≤ 28°C (68°F ≤ Temperature ≤ 82.4°F)
• SUCHY: Wilgotność < 40%
• MOKRY: Wilgotność > 70%

Figure 7: The comfort indicator displaying "COM" for comfortable conditions.

3.5 Alerty dotyczące temperatury i wilgotności

You can set audible high and low alert values for temperature and humidity. When the readings exceed or fall below your preset values, an alarm will sound.

1. Press the "ALERT" button to enter alert setting mode.
2. Use the "CH/▲" and "MEM/▼" buttons to adjust the desired high/low temperature and humidity thresholds for each channel.
3. Press "ALERT" again to confirm settings and move to the next parameter.
4. Exit alert setting mode by pressing the "ALERT" button until the normal display returns.

4. Konserwacja

4.1 Wymiana baterii

When the battery indicator appears on the display, replace the batteries in the corresponding unit (main unit or sensor). Refer to Section 2.1 for battery installation instructions.

4.2 Czyszczenie

Wytrzyj jednostki miękką ściereczką.amp ściereczką. Nie używaj środków czyszczących ani rozpuszczalników o działaniu ściernym, ponieważ mogą one uszkodzić wyświetlacz lubasing.

4.3 Względy środowiskowe

While remote sensors are designed for outdoor use, prolonged exposure to extreme weather conditions (heavy rain, direct intense sunlight, extreme cold/heat) can affect performance and lifespan. For best results, place sensors in a protected location.

5. Rozwiązywanie Problemów

6. Specyfikacje

Figure 8: Dimensions of the main display unit and a remote sensor.

7. Gwarancja i wsparcie

Geevon is committed to providing high-quality products and customer satisfaction.

• 1-letnia gwarancja: Na ten produkt udzielana jest roczna gwarancja od daty zakupu.
• 90-Day Free Replacements: Free replacements are available within 90 days of purchase for any manufacturing defects.
• 30-dniowy bezpłatny zwrot: You may return the product within 30 days for a full refund.
• Dożywotnie wsparcie techniczne: Geevon offers lifetime technical support for this product.
• Telefon do obsługi klienta: +1-8889704397

Figure 9: Summary of Geevon's warranty and customer support offerings.