Wstęp
This manual provides comprehensive instructions for the safe assembly, proper use, and maintenance of your tectake Metal Display Cabinet, model 406418. Please read all instructions carefully before beginning assembly and retain this manual for future reference. Ensure all components are present and undamaged before proceeding.
Instrukcje bezpieczeństwa
- Wymagany montaż dla osoby dorosłej: This product contains small parts and requires adult assembly. Keep children and pets away during assembly.
- Użyj odpowiednich narzędzi: Ensure you have the necessary tools for assembly (e.g., screwdriver, hammer if needed).
- Stabilna powierzchnia: Assemble the cabinet on a clean, flat, and stable surface to prevent damage or injury.
- Zabezpieczenie przed wywróceniem: Always install the provided anti-tip hardware to secure the cabinet to a wall. This prevents accidental tipping, which can cause serious injury.
- Rozkład masy: Distribute weight evenly on shelves. Do not exceed the maximum load capacity per shelf (25 kg). Place heavier items on lower shelves.
- Unikaj przeciążania: Do not overload the cabinet. Overloading can compromise stability and cause damage.
- Obsługa szkła: Handle glass components with care to avoid breakage and injury. Wear protective gloves if necessary.
- Regularne kontrole: Okresowo sprawdzaj wszystkie elementy mocujące, aby upewnić się, że są dobrze dokręcone. W razie potrzeby dokręć je.
Zawartość opakowania
Before beginning assembly, please verify that all the following components are present and undamaged:
- Metal Display Cabinet components (frame, panels, doors)
- Adjustable glass shelves (2 pieces)
- Sprzęt zabezpieczający przed przewróceniem
- Sprzęt montażowy (śruby, nakrętki itp.)
- Instrukcja montażu
If any parts are missing or damaged, please contact tectake customer support before proceeding with assembly.
Specyfikacje
| Numer modelu: | 406418 |
| Wymiary całkowite (szer. x gł. x wys.): | 80 cm x 37 cm x 90.5 cm (około 31.5 cala x 14.6 cala x 35.6 cala) |
| Wymiary wewnętrzne (szer. x gł. x wys.): | 79 cm x 30 cm x 68 cm (około 31.1 cala x 11.8 cala x 26.8 cala) |
| Shelf Dimensions (W x D x H): | 79 cm x 30 cm x 2 cm (około 31.1 cala x 11.8 cala x 0.8 cala) |
| Prześwit: | 15 cm (około 5.9 cali) |
| Adjustable Feet Height: | Up to 1.5 cm (approximately 0.6 in) |
| Tworzywo: | Powder-coated steel, Glass, Polypropylene |
| Grubość szkła: | 4 mm |
| Maksymalna ładowność na półkę: | 25 kg (około 55 funta) |
| Waga produktu: | 21.8 kg (około 48 funta) |
Rysunek 1: Wymiary produktu powyżejview. All measurements are approximate.
Instrukcja montażu
Follow these steps carefully to assemble your tectake Metal Display Cabinet. It is recommended to have two people for assembly.
- Przygotuj obszar: Przygotuj przestronną, czystą i płaską powierzchnię do montażu. Rozłóż koc lub tekturę, aby zabezpieczyć części szafki i podłogę.
- Zidentyfikuj komponenty: Unpack all components and compare them with the package contents list. Familiarize yourself with the different parts.
- Złóż ramę: Begin by connecting the main frame components (side panels, top, and bottom panels) using the provided screws and fasteners. Ensure all connections are secure but do not overtighten initially.
- Zamontuj panel tylny: Carefully slide or attach the back panel into its designated grooves or mounting points. Secure it with the appropriate fasteners.
- Montaż nóżek regulowanych: Przykręć regulowane nóżki do dolnych narożników szafki. Można je później wyregulować, aby wypoziomować szafkę na nierównej podłodze.
- Install Door Hinges and Doors: Attach the hinges to the cabinet frame and then to the glass doors. Carefully mount the doors onto the cabinet. Ensure the doors swing freely and align correctly. The magnetic closures should engage properly.
- Wstaw szklane półki: The cabinet features adjustable shelf supports. Insert the shelf pins into the desired height slots. Carefully place the glass shelves onto these supports. Ensure they are stable before placing items on them.
- Zainstaluj zabezpieczenia przed przewróceniem: This is a critical safety step. Securely attach the anti-tip hardware to the top rear of the cabinet and then to a wall stud using appropriate wall anchors (not always included, check local building codes). This prevents the cabinet from tipping over.
- Ostateczne poprawki: Once assembled, gently move the cabinet to its final position. Adjust the feet to ensure the cabinet is level and stable. Check all screws and fasteners for tightness.
Rysunek 2: Detail of adjustable shelves, magnetic door closure, and ergonomic handles.
Rysunek 3: Fully assembled cabinet with doors open, illustrating storage capacity.
Instrukcja obsługi
- Otwieranie i zamykanie drzwi: Gently pull the door handles to open the glass doors. The magnetic closure will release. To close, push the doors firmly until the magnets engage.
- Regulacja półek: To adjust the height of the glass shelves, carefully remove all items from the shelf. Lift the shelf slightly and remove the shelf pins from their current slots. Reinsert the pins into the desired new slots, ensuring they are level and secure. Then, carefully place the glass shelf back onto the pins.
- Ładowanie przedmiotów: Place items carefully onto the shelves, ensuring weight is distributed evenly. Do not exceed the maximum load capacity of 25 kg per shelf.
Rysunek 4: Cabinet in use, displaying various items.
Konserwacja
- Czyszczenie szafki: Przetrzyj metalowe powierzchnie miękką,amp cloth. Avoid abrasive cleaners or harsh chemicals, as they can damage the powder coating.
- Czyszczenie paneli szklanych: Use a standard glass cleaner and a soft, lint-free cloth to clean the glass doors and side panels.
- Zasypka: Regularly dust the cabinet and its contents to maintain its appearance. The elevated ground clearance facilitates easy cleaning underneath the cabinet.
- Sprawdź elementy złączne: Periodically inspect all screws and connections to ensure they are tight. Retighten if necessary to maintain stability.
Rysunek 5: Easy maintenance due to elevated design.
Rozwiązywanie problemów
- Cabinet is wobbly or unstable:
- Ensure all assembly screws are tightened. Adjust the leveling feet at the bottom of the cabinet to compensate for uneven flooring. Verify that the anti-tip hardware is securely installed to a wall stud.
- Drzwi nie zamykają się prawidłowo lub są nieprawidłowo ustawione:
- Check the hinge alignment and adjust if necessary. Ensure the magnetic closures are properly positioned and free from obstruction. Verify that the cabinet itself is level.
- Glass shelves are not level:
- Ensure the shelf pins are inserted into corresponding slots on both sides of the cabinet at the same height. Check that the cabinet is level using the adjustable feet.
- Brakujące lub uszkodzone części:
- Do not proceed with assembly. Contact tectake customer support immediately for assistance and replacement parts.
Gwarancja i wsparcie
For warranty information, technical support, or to order replacement parts, please refer to the contact information provided with your purchase documentation or visit the official tectake webStrona. Kontaktując się z pomocą techniczną, prosimy o przygotowanie numeru modelu (406418) i daty zakupu.
