1. Wprowadzenie
Thank you for choosing the Waterdrop M6HG Mineralized Instant Hot Reverse Osmosis System. This advanced countertop water filter provides purified, mineralized, and instant hot water for various needs. Featuring an 8-stage filtration process and NSF/ANSI 58 & 372 certifications, it ensures high-quality drinking water. This manual provides essential information for safe operation, installation, maintenance, and troubleshooting.
Główne cechy obejmują:
- 8-Stage Filtration with 0.0001μm RO membrane.
- Mineralization to add beneficial calcium, magnesium, and potassium.
- Instant hot water with 5 temperature options (Room Temp, 45°C, 65°C, 85°C, 95°C).
- NSF/ANSI 58 & 372 Certified for reduction of various contaminants.
- 3:1 Pure to Drain water ratio, separating tap and waste water.
- Installation-free countertop design.
- Detachable 1.2L glass pitcher.
2. Środki ostrożności
Aby uniknąć obrażeń lub uszkodzeń urządzenia, przed jego użyciem należy uważnie przeczytać wszystkie instrukcje dotyczące bezpieczeństwa.
- Bezpieczeństwo elektryczne: Upewnij się, że gniazdo zasilania jest zgodne z natężeniem prądu urządzenia.tage. Do not immerse the unit in water. Unplug before cleaning or maintenance.
- Bezpieczeństwo ciepłej wody: The system dispenses hot water up to 95°C. Exercise extreme caution to avoid burns. Keep children away from the hot water dispenser.
- Pitcher Handling: NIE remove the pure water pitcher during flushing or while the unit is actively dispensing water. Keep the pitcher on the unit during flushing and use.
- Umieszczenie: Place the unit on a stable, flat surface. Ensure at least 55cm of space above the unit for easy tank replacement and proper ventilation.
- Źródło wody: Use only potable tap water in the feed water tank.
- Konserwacja: Only perform maintenance as described in this manual. For complex issues, contact customer support.
3. Składniki produktu
The Waterdrop M6HG system includes the main unit, a detachable glass pitcher, and pre-installed filters.
Figure 3.1: Waterdrop M6HG Main Unit with dimensions (Height: 36.9cm, Width: 23.5cm, Depth: 40.3cm). Features include 8-Stage Filtration, Mineral-Infused water, NSF/ANSI 58 & 372 Certification, and Instant Heating. A detachable glass pitcher is shown next to the unit.
- Jednostka główna: Houses the filtration system, water tanks (4L tap water, 1.5L waste water), heating element, and control panel.
- Detachable Glass Pitcher: A 1.2L pitcher for purified water, made of glass to prevent chemical harm.
- Filtry: Multi-stage filters including a RO membrane, pre-carbon filter, scale inhibitor, PP cotton, activated carbon filter, mineral infusion layer, and UV treatment.
4. Konfiguracja
The Waterdrop M6HG is designed for installation-free use. Follow these steps for initial setup:
- Rozpakować: Ostrożnie wyjąć wszystkie elementy z opakowania.
- Umieszczenie: Place the main unit on a stable, level countertop. Ensure adequate space around the unit, especially 55cm above for tank access.
- Napełnij zbiornik na wodę: Open the feed water tank lid and fill it with potable tap water. The tank has a 4L capacity for tap water.
- Podłącz zasilanie: Podłącz przewód zasilający do uziemionego gniazdka elektrycznego.
- Wstępne płukanie: The system will automatically initiate an initial flushing cycle. NIE remove the glass pitcher during this process. This flushes the filters and prepares the system for use.
- NFC One-Tap Support: For a smart guide, turn on NFC on your phone and tap it against the NFC label on the unit. This provides access to installation videos, FAQs, and customer support.
Figure 4.1: User-Friendly Design highlighting the smart control panel, filter replacement mechanism, 5.5L water tank, voice prompts, and automatic water refill feature.
5. Instrukcja obsługi
The M6HG system offers customizable temperature and volume settings for your convenience.
- Włączanie: The unit powers on automatically when plugged in.
- Wybierz temperaturę: Use the control panel to select your desired water temperature. Options include:
- Room Temp (for daily drinking)
- 45°C (for baby formula)
- 65°C (for tea)
- 85°C (dla kawy)
- 95°C (for oatmeal)
- Dostosuj głośność: Select the desired dispensing volume from 150ml, 250ml, 350ml, 500ml, or MAX.
- Dozowanie wody: Place the glass pitcher or a cup under the dispenser and press the dispense button. The system will heat and dispense water instantly.
- Ulubiony tryb: Save your preferred temperature and volume settings using the 'Favorite Mode' for one-tap access.
- Komunikaty głosowe: The unit provides voice prompts for actions like refilling water or replacing filters.
- Automatyczne uzupełnianie wody: The system automatically refills the pure water reservoir below 0.6L to ensure water is always ready.
Figure 5.1: Instant hot water dispensing with temperature options for various beverages and foods.
6. Konserwacja
Regular maintenance ensures optimal performance and longevity of your Waterdrop M6HG system.
6.1 Wymiana filtra
The system will indicate when filters need replacement via the control panel and voice prompts. Filters can be replaced in seconds using the 'Twist & Pull' design.
- Odłącz urządzenie od gniazdka elektrycznego.
- Znajdź komorę filtra.
- Twist the old filter counter-clockwise and pull it out.
- Insert the new filter, twist clockwise until secure.
- Plug the unit back in. The system may initiate a flushing cycle after filter replacement.
6.2 Czyszczenie
- Jednostka główna: Przetrzyj powierzchnię zewnętrzną miękką,amp ściereczką. Nie używaj środków czyszczących o właściwościach ściernych ani nie zanurzaj urządzenia w wodzie.
- Glass Pitcher: The 1.2L detachable glass pitcher can be washed with mild soap and water.
- Zbiornik na ścieki: The waste water tank (1.5L capacity) should be emptied regularly. The waste water is 100% separate from pure water and can be recycled for non-potable uses like watering plants or cleaning.
Figure 6.1: The 1.2L detachable glass pitcher is safe and easy to use, preventing chemical harm and suitable for various applications.
Figure 6.2: Illustration of 100% separation of tap water (4L) and wastewater (1.5L) tanks, preventing backflow pollution and extending filter lifespan.
7. Filtration Process and Certification
The Waterdrop M6HG employs an advanced 8-stage filtration system to ensure comprehensive purification and mineralization.
Figure 7.1: Advanced 8-Stage Filtration with added minerals. The stages include Pre-Carbon Filter, Scale Inhibitor, PP Cotton, 0.0001μm RO Membrane, Activated Carbon Filter, Mineral Infusion Layer, PP Cotton, and UV Treatment. This process reduces contaminants like Fluoride, PFOA, PFOS, TDS, Chlorine, Lead, Heavy Metals, Chromium, VOCs, Cadmium, and other impurities.
After RO purification, the system adds essential minerals like calcium, magnesium, and potassium to improve taste and provide balanced daily drinking water.
Figure 7.2: The system adds minerals such as Calcium (Ca), Magnesium (Mg), Potassium (K), Zinc (Zn), Sodium (Na), and Strontium (Sr) to support bone & muscle health, nerve & heart function, and metabolism & immune health.
7.3 Certyfikaty
The Waterdrop M6HG system is certified by IAPMO R&T to NSF/ANSI 58 for the reduction of specified claims on the Performance Data Sheet, and to NSF/ANSI 372 for low lead content, ensuring your safety and water quality.
Figure 7.3: The Waterdrop M6HG system is NSF/ANSI 58 & 372 Certified and SGS Tested. A certificate of listing from IAPMO Research and Testing, Inc. is shown, confirming compliance for reduction of claims and low lead content. For detailed certification information, please refer to the official document: M6 Certification PDF.
8. Rozwiązywanie Problemów
If you encounter issues with your Waterdrop M6HG system, refer to the following common troubleshooting steps:
- Brak dozowania wody: Check if the unit is plugged in, the water tank is filled, and the glass pitcher is correctly placed. Ensure no error codes are displayed on the panel.
- Niezwykły smak/zapach: This may indicate filters need replacement or the system requires flushing. Perform a flushing cycle as per initial setup instructions.
- Powolny przepływ wody: Check filter status. Clogged filters can reduce flow rate. Replace filters if indicated.
- Kody błędów: If an error code appears on the display, refer to the NFC smart guide for specific instructions or contact customer support.
For further assistance, use the NFC One-Tap Support feature on your phone to access FAQs or contact customer support directly.
9. Specyfikacje
| Funkcja | Specyfikacja |
|---|---|
| Numer modelu | WD-M6HG |
| Marka | Kropla wody |
| Wymiary (gł. x szer. x wys.) | 40.3D x 23.5W x 36.9H centymetrów |
| Typ instalacji | Blat |
| Pojemność zbiornika wody zasilającej | 4 litrów |
| Pojemność zbiornika na ścieki | 1.5 litrów |
| Pure Water Pitcher Capacity | 1.2 litrów |
| Stosunek czystości do odcieku | 3:1 |
| Filtracja Stages | 8-Stage (including RO membrane and mineralization) |
| Opcje temperatury | Room Temp, 45°C, 65°C, 85°C, 95°C |
| Źródło zasilania | Elektryczny przewodowy |
| Certyfikaty | NSF/ANSI 58 i 372 |
10. Gwarancja i wsparcie
Waterdrop provides customer support for its products. For warranty information, technical assistance, or to purchase replacement parts and filters, please refer to the official Waterdrop webodwiedź witrynę lub skontaktuj się bezpośrednio z działem obsługi klienta.
You can also utilize the NFC One-Tap Support feature on your device to quickly access support resources, FAQs, and contact information.
