1. Ważne informacje dotyczące bezpieczeństwa
Please read all instructions carefully before using the Uwant Y200-S Fabric Spot Cleaner. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Bezpieczeństwo elektryczne: Always ensure the power cord is undamaged and plugged into a grounded outlet. Do not use with wet hands.
- Gorąca para: The cleaner produces 100°C steam. Avoid direct contact with skin or pets to prevent burns.
- Zużycie wody: Use only clean water in the clean water tank. Do not add cleaning solutions to the clean water tank unless specifically designed for steam cleaners and approved by Uwant.
- Składowanie: Przechowuj urządzenie w suchym pomieszczeniu.
- Dzieci i zwierzęta: Przechowywać urządzenie w miejscu niedostępnym dla dzieci i zwierząt domowych.
- Konserwacja: Przed przystąpieniem do jakichkolwiek prac konserwacyjnych lub czyszczenia należy odłączyć urządzenie od prądu.
2. Koniec produktuview
The Uwant Y200-S is a powerful fabric spot cleaner designed for deep cleaning and sanitizing various fabric surfaces using high-temperature steam and strong suction.
2.1 Zawarte komponenty
- 1x Uwant Y200-S Spot Cleaner Main Unit
- 1x Hose Assembly
- 1x Steam Brush / Brush Head
- 1x Storage Clasp
- 1x Clean Water Tank
- 1x Waste Water Tank
2.2 Identyfikacja komponentów
Opis obrazu: Przód view of the Uwant Y200-S Fabric Spot Cleaner. The main body is grey, featuring two transparent tanks on the front: the upper tank for clean water and the lower tank for waste water. A control panel is visible on the top, and the hose connection port is on the side.
Opis obrazu: The flexible hose assembly, showing the connection point for the main unit on one end and the steam brush head attached to the other. The brush head has bristles and a suction nozzle.
3. Instrukcje konfiguracji
- Rozpakowanie urządzenia: Ostrożnie wyjmij wszystkie elementy z opakowania. Zachowaj opakowanie do późniejszego przechowywania lub transportu.
- Attach Hose Assembly: Insert the hose assembly connector firmly into the designated port on the main unit until it clicks into place.
- Attach Steam Brush Head: Connect the steam brush head to the end of the hose assembly. Ensure it is securely fastened.
- Napełnij zbiornik na czystą wodę:
- Wyjmij zbiornik na czystą wodę z jednostki głównej.
- Open the tank cap and fill with clean tap water. Do not exceed the MAX fill line.
- Dokładnie zamknij nakrętkę i włóż zbiornik z powrotem do jednostki głównej.
Opis obrazu: A hand holding the clean water tank, pouring water into it. The tank is transparent with a visible MAX fill line.
- Podłącz do zasilania: Podłącz przewód zasilający do odpowiedniego, uziemionego gniazdka elektrycznego.
4. Instrukcja obsługi
Before operating, ensure the clean water tank is filled and the waste water tank is empty and properly installed.
4.1 Włączanie i ogrzewanie
- Naciśnij przycisk zasilania na panelu sterowania. Zaświeci się kontrolka.
- The appliance will begin heating the water to 100°C. This process may take a few minutes. The indicator light may change or flash to show heating status.
- Once the desired temperature is reached, the indicator light will become solid, indicating the cleaner is ready for use.
4.2 Cleaning Procedure (Wash & Vacuum Simultaneously)
- Wstępny test: Always test the cleaner on an inconspicuous area of the fabric first to ensure colorfastness and no adverse reactions.
- Zastosuj Steam: Hold the steam brush head over the stained area. Press the steam trigger on the handle to release hot steam. Move the brush head slowly over the area.
- Szorowanie (opcjonalnie): For stubborn stains, gently scrub the area with the brush bristles while applying steam.
- Extract Water: Release the steam trigger. Press the vacuum suction button on the handle to activate the suction. Move the brush head over the wet area to extract the dirty water into the waste water tank.
- Powtarzać: W razie potrzeby powtarzaj kroki 2–4, aż plama zostanie usunięta, a obszar będzie tak suchy, jak to możliwe.
Opis obrazu: A person demonstrating the use of the Uwant Y200-S Fabric Spot Cleaner on a sofa cushion. The steam brush head is pressed against the fabric, and a small amount of steam is visible.
4.3 Tubing Self-Cleaning Function
After each use, it is recommended to use the self-cleaning function to prevent odors and maintain hygiene.
- Upewnij się, że w zbiorniku na czystą wodę znajduje się wystarczająca ilość wody.
- Place the steam brush head into the designated self-cleaning port on the main unit (if available) or into a sink.
- Press and hold the self-cleaning button (refer to control panel diagram if available) for a few seconds. The appliance will flush clean water through the hose and suction it into the waste water tank.
- Pozwól cyklowi się zakończyć.
Opis obrazu: A close-up of the Uwant Y200-S main unit, showing the self-cleaning port where the steam brush head is inserted for the automatic cleaning cycle.
5. Konserwacja
Regular maintenance ensures optimal performance and extends the life of your Uwant Y200-S.
- Empty and Clean Waste Water Tank: After each use, remove the waste water tank, empty its contents, and rinse thoroughly with clean water. Allow it to air dry before reinserting.
- Czysty zbiornik na czystą wodę: Periodically rinse the clean water tank to prevent mineral buildup.
- Clean Steam Brush Head: Remove any debris or hair from the brush bristles and suction nozzle. Rinse under running water.
- Wytrzyj zewnętrzną część: Użyj miękkiego, damp cloth to wipe the exterior of the main unit. Do not use harsh chemicals.
- Składowanie: Ensure both tanks are empty and dry before storing the appliance. Wrap the power cord neatly using the auto cord retraction feature (if applicable) or the storage clasp. Store in a cool, dry place.
6. Rozwiązywanie Problemów
| Problem | Możliwa przyczyna | Rozwiązanie |
|---|---|---|
| Brak zasilania | Appliance not plugged in; Power outlet faulty; Power button not pressed. | Check power cord connection; Test outlet with another device; Press the Power button firmly. |
| Bez Steam | Clean water tank empty; Appliance not heated sufficiently; Steam trigger not pressed. | Refill clean water tank; Wait for heating indicator light to become solid; Press steam trigger on handle. |
| Słabe ssanie | Waste water tank full; Hose or nozzle clogged; Tank not properly sealed. | Empty waste water tank; Clear any blockages from hose/nozzle; Ensure tanks are securely in place. |
| Wyciek wody | Tanks not properly seated; Hose connection loose; Overfilled clean water tank. | Ensure tanks are securely installed; Check hose connections; Do not overfill clean water tank. |
If the problem persists after attempting these solutions, please contact Uwant customer support.
7. Specyfikacje produktu
- Marka: Uwant
- Model: Y200-S
- Numer modelu: Y200 Steam
- Waga przedmiotu: 6 kilograma
- Kolor: Szary
- Temperatura pary: 100°C
- Moc ssania: 18kPa
- Kraj pochodzenia: Chiny
- Zawartość zestawu: Hose Assembly, Spot Cleaner Main Unit, Steam Brush / Brush Head, Storage Clasp, Waste Water Tank, Clean Water Tank
8. Gwarancja i obsługa klienta
Uwant products are manufactured to high-quality standards. For warranty information, please refer to the warranty card included with your purchase or visit the official Uwant webstrona.
For technical assistance, troubleshooting not covered in this manual, or to order replacement parts, please contact Uwant customer support:
- Webstrona: www.uwant.com (Sprawdź swoją lokalizację regionalną webteren)
- E-mail: Zapoznaj się z opakowaniem produktu lub webstrona zawierająca konkretny adres e-mail do kontaktu.
- Telefon: Zapoznaj się z opakowaniem produktu lub webstrona zawierająca konkretny numer kontaktowy.
Please have your model number (Y200-S) and purchase date ready when contacting support.