YZONA Ebike Rack-2 Instruction Manual

1. Koniec produktuview

The YZONA Ebike Rack-2 is a heavy-duty, lockable, and foldable bike carrier designed to transport up to two e-bikes or fat tire bikes. It features a convenient ramp for easy loading and a robust clamping system to ensure secure transport. This rack is compatible with a 2-inch hitch receiver, making it suitable for SUVs, cars, trucks, and vans.

Figure 1: YZONA Ebike Rack-2 mounted on a vehicle.

2. Informacje dotyczące bezpieczeństwa

OSTRZEŻENIE: Nieprzestrzeganie tych instrukcji bezpieczeństwa może spowodować poważne obrażenia ciała lub uszkodzenie mienia.

• Do not exceed the maximum load capacity of 200 lbs (100 lbs per bike).
• Ensure the rack is securely installed into the hitch receiver and all bolts are tightened before each use.
• Always use all provided straps and clamps to secure bikes firmly to the rack.
• Check all connections and bike security periodically during long trips.
• Avoid driving over rough terrain at high speeds when the rack is loaded.
• Professional installation is highly recommended for initial setup.

3. Konfiguracja i instalacja

3.1. Hitch Receiver Installation

1. Insert the main hitch arm of the bike rack into your vehicle's 2-inch hitch receiver.
2. Align the hitch pin holes and insert the provided hitch pin.
3. Secure the hitch pin with the cotter pin or locking mechanism.
4. Use the anti-wobble hitch tightener (U-bolt and plate) to eliminate any play between the rack and the receiver. Tighten securely with a wrench.

3.2. Unfolding the Rack

1. Locate the folding mechanism lever at the base of the rack.
2. Press the lever and carefully unfold the bike trays until they lock into the horizontal position.
3. Ensure both trays are fully extended and locked before loading bikes.

Figure 2: The rack features a folding design for storage and a tiltable design for trunk access.

4. Instrukcja obsługi

4.1. Loading Bikes with Ramp

1. Pull out the aluminum loading ramp from the side of the rack.
2. Ustaw ramp securely into the designated slot on the bike tray.
3. Carefully roll your e-bike up the ramp onto the bike tray.
4. Once the bike is on the tray, remove the ramp and store it back in its slot.

4.2. Zabezpieczanie Rowerów

1. Adjust the wheel chocks on the trays to fit your bike's wheelbase.
2. Use the durable nylon quick-release straps to secure both front and rear wheels to the trays. Ensure they are tight and the non-slip rubber pads protect the tires.
3. Position the adjustable vertical clamping arm to secure the bike frame or seat post. The arm can swivel 360 degrees to accommodate various bike shapes.
4. Tighten the ratcheting clamp on the vertical arm until the bike is firmly held in place.
5. For added security, use the integrated locking mechanism on the vertical clamp aby zapobiec kradzieży.

Figure 3: The ratcheting strap system and stabilizing arm provide secure bike attachment.

4.3. Tilting the Rack for Trunk Access

1. Ensure bikes are securely fastened.
2. Locate the tilt release lever at the base of the rack.
3. Press the lever and carefully tilt the entire rack downwards to access your vehicle's trunk.
4. When finished, lift the rack back into the upright position until it locks securely.

4.4. Adjusting for Different Bike Sizes

The YZONA Ebike Rack-2 accommodates tires up to 5 inches wide and supports bikes with a wheelbase of up to 53 inches. The adjustable wheel chocks and swiveling clamping arms allow for compatibility with various bicycle types, including E-Bikes, Fat Tire Bikes, Mountain Bikes, Road Bikes, Cruiser Bikes, Commuter/Hybrid Bikes, BMX Bikes, Folding Bikes, Women's Bikes, and Children's Bikes.

Figure 4: Compatibility with various bike sizes and types.

5. Konserwacja

• Regularly inspect all bolts, nuts, and moving parts for tightness and wear. Tighten as necessary.
• Clean the rack periodically with mild soap and water to remove dirt, road grime, and salt, especially after exposure to harsh weather conditions.
• Lubricate moving parts (e.g., pivot points, locking mechanisms) with a suitable lubricant to ensure smooth operation and prevent corrosion.
• Aby przedłużyć żywotność stojaka, gdy nie jest używany, należy go przechowywać w suchym miejscu.

6. Rozwiązywanie Problemów

6.1. Rack Wobbles in Hitch

Ensure the anti-wobble hitch tightener is correctly installed and tightened. If wobble persists, check if your hitch receiver is the correct 2-inch size and free from excessive wear.

6.2. Bikes Not Secure

Verify that all wheel straps are tightly fastened and the vertical clamping arms are securely ratcheted onto the bike frames/seat posts. Adjust wheel chocks to properly cradle the tires. Ensure the bike's weight does not exceed the per-bike or total load capacity.

6.3. Ramp Does Not Fit Securely

Upewnij się, że ramp is fully extended and properly seated in the designated slots on the bike tray. Check for any debris or damage that might prevent proper seating.

7. Specyfikacje

8. Gwarancja i wsparcie

For warranty information or technical support, please refer to the product packaging or contact YZONA customer service directly. Keep your purchase receipt for warranty claims.