1. Wprowadzenie
Thank you for choosing the NULKOMMA YL81F Ebike LCD Display Meter. This manual provides essential information for the proper installation, operation, and maintenance of your electric bicycle display. Please read this manual thoroughly before use to ensure optimal performance and safety.
The YL81F is a robust and waterproof LCD control panel designed for 36V and 48V electric bicycles, featuring a 5-pin connector and supporting the No.2 protocol for reliable communication with your ebike controller.
2. Informacje dotyczące bezpieczeństwa
- Always ensure the ebike power is OFF before connecting or disconnecting the display.
- Do not attempt to disassemble or modify the display unit. This may void the warranty and cause damage.
- Keep the display clean and free from excessive dirt or debris.
- While the display is waterproof, avoid prolonged submersion or high-pressure water jets.
- Upewnij się, że wszystkie połączenia są solidne, aby zapobiec przerywaniu działania urządzenia.
3. Zawartość opakowania
Sprawdź, czy w przesyłce znajdują się wszystkie elementy:
- 1 x NULKOMMA YL81F LCD Display Meter
4. Koniec produktuview
The NULKOMMA YL81F display provides essential riding data and control for your ebike. It consists of the main LCD screen unit and a separate control button panel.

Rysunek 4.1: Koniecview of the NULKOMMA YL81F Ebike LCD Display Meter and its separate control unit.
4.1. Wyświetlacz
The LCD screen shows various parameters such as speed, battery level, assistance level (PAS), trip distance, odometer, maximum speed, and average speed.

Rycina 4.2: Przód view of the YL81F display unit with approximate dimensions (59.5mm width, 95mm height, 86mm mount width).
4.2. Control Button Panel
The separate button panel allows for easy interaction with the display without reaching the screen itself. It typically includes buttons for power, mode selection, and assistance level adjustment.

Figure 4.3: Close-up of the control button panel, showing power, mode, and up/down buttons.
4.3. Łączność
The display connects to your ebike controller via a waterproof 5-pin connector, ensuring reliable operation even in wet conditions.

Figure 4.4: The YL81F display, control unit, and the waterproof 5-pin connector.
5. Konfiguracja i instalacja
Follow these steps to properly install the NULKOMMA YL81F display on your ebike:
- Montaż wyświetlacza: Fix the LCD display unit and the separate control button panel onto the handlebar of your electric vehicle. The display is compatible with handlebar diameters of 22.2mm, 25.4mm, 28.6mm, and 31.8mm. Adjust the viewkąt zapewniający optymalną widoczność.
- Connecting to the Controller: Ensure the ebike power is completely OFF. Connect the display's 5-pin connector to the corresponding connector on your ebike's controller. Ensure the connection is firm and secure.
- Włączanie: Turn on the ebike's main power. The display and the electric vehicle should now enter normal operating state.

Rysunek 5.1: Tył view of the display mount, showing attachment points for the handlebar.

Rysunek 5.2: Strona view of the display and its handlebar mounting mechanism.

Figure 5.3: The YL81F display correctly mounted on an ebike handlebar.
6. Instrukcja obsługi
6.1. Włączanie/wyłączanie zasilania
- To power on the display, press and hold the Moc przycisk na panelu sterowania.
- To power off the display, press and hold the Moc naciśnij przycisk ponownie.
6.2 Wyświetlane informacje
Na ekranie LCD zwykle wyświetlane są następujące informacje:
- Obecna prędkość: Wyświetla prędkość jazdy w czasie rzeczywistym.
- Poziom naładowania baterii: Wskazuje poziom naładowania baterii.
- Poziom PAS: Shows the current Pedal Assist System level (e.g., 0-5).
- WYJAZD: Distance covered for the current ride.
- ODO: Całkowity przebyty dystans (licznik kilometrów).
- MAKS.: Maximum speed achieved during the current ride.
- AVG: Średnia prędkość podczas aktualnego przejazdu.
6.3. Funkcje przycisków
The control panel buttons allow you to navigate and adjust settings:
- Przycisk zasilania: Włącza/wyłącza wyświetlacz.
- Przyciski góra/dół (+/-): Adjusts the PAS level or navigates through menu options.
- Przycisk trybu/informacji (i): Cycles through different display modes (e.g., TRIP, ODO, MAX, AVG) or enters settings menu.
- Light Button (headlight icon): Controls the ebike's lights (if connected and supported by the controller).
7. Konserwacja
- Czyszczenie: Użyj miękkiego, damp ściereczka do wycierania ekranu wyświetlacza iasing. Unikaj środków czyszczących o działaniu ściernym i rozpuszczalników, które mogą uszkodzić powierzchnię.
- Wodoodporność: The display is designed to be waterproof for typical riding conditions. However, do not intentionally submerge it or expose it to high-pressure water sprays.
- Składowanie: Jeśli rower elektryczny nie będzie używany przez dłuższy czas, należy przechowywać go i wyświetlacz w suchym i umiarkowanym miejscu.
- Kontrola połączenia: Periodically check that the 5-pin connector is securely attached and free from corrosion or damage.
8. Rozwiązywanie Problemów
If you encounter issues with your NULKOMMA YL81F display, refer to the following common problems and solutions:
- Display does not power on:
- Ensure the ebike's main power is on.
- Check if the 5-pin connector is securely plugged into the controller.
- Verify the ebike battery has sufficient charge.
- No speed reading or incorrect data:
- Check the connection to the speed sensor (if external).
- Ensure the wheel magnet is correctly positioned relative to the speed sensor.
- Confirm the display settings for wheel size are correct (if adjustable).
- Przyciski nie reagują:
- Sprawdź, czy wyświetlacz jest włączony.
- Sprawdź, czy przyciski nie są zablokowane lub uszkodzone.
If the problem persists after attempting these solutions, please contact NULKOMMA customer support for further assistance.
9. Specyfikacje
| Funkcja | Specyfikacja |
|---|---|
| Marka | NULKOMMA |
| Numer modelu | YL81F |
| Typ wyświetlacza | LCD |
| Tomtage Kompatybilność | 36V, 48V |
| Typ złącza | Waterproof 5-pin |
| Typ czujnika | Czujnik prędkości, czujnik kadencji |
| Typ montażu | Uchwyt na kierownicę |
| Compatible Handlebar Diameters | 22.2mm, 25.4mm, 28.6mm, 31.8mm |
| Wejście interfejsu ludzkiego | Pikolak |
| Tworzywo | Premium ABS |
10. Gwarancja
The NULKOMMA YL81F Ebike LCD Display Meter comes with a 1-letnia gwarancja from the date of purchase. This warranty covers manufacturing defects under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper installation.
Proszę zachować dowód zakupu na potrzeby roszczeń gwarancyjnych.
11. Wsparcie
For technical support, warranty claims, or any questions regarding your NULKOMMA YL81F Ebike LCD Display Meter, please contact NULKOMMA customer service through the retailer where you purchased the product or visit the official NULKOMMA brand store online.
When contacting support, please provide your product model (YL81F) and a detailed description of the issue.