1. Wprowadzenie
The Phanteks XT View Matrix is a high-performance mid-tower gaming case designed for enthusiasts. It features an immersive 600 LED Matrix screen, dual tempered glass panels, and optimized airflow for superior cooling. This manual provides essential information for the proper installation, operation, and maintenance of your new PC case.

Image 1.1: The Phanteks XT View Matrix Mid-Tower Gaming Case, showcasing its white exterior and vibrant RGB fans visible through the tempered glass panels.
2. Informacje dotyczące bezpieczeństwa
Przed instalacją lub uruchomieniem produktu prosimy o zapoznanie się ze wszystkimi instrukcjami bezpieczeństwa. Nieprzestrzeganie ich może spowodować obrażenia ciała lub uszkodzenie produktu.
- Przed przystąpieniem do jakichkolwiek prac instalacyjnych lub konserwacyjnych należy zawsze odłączyć zasilanie od gniazdka ściennego.
- Unikaj wystawiania obudowy na działanie wilgoci i ekstremalnych temperatur.
- Aby zapobiec stłuczeniu paneli ze szkła hartowanego, należy obchodzić się z nimi ostrożnie.
- Keep small components and tools away from children.
- Zapewnij właściwe uziemienie, aby zapobiec zagrożeniom elektrycznym.
3. Instrukcja instalacji
This section outlines the steps for installing your PC components into the Phanteks XT View Matrix case.
3.1. Przygotowanie sprawy
Remove the side panels by unscrewing the thumbscrews at the rear of the case and gently sliding the panels off. For tempered glass panels, exercise caution.

Obraz 3.1: Wewnętrzny view of the case, highlighting various mounting points for components such as fans, storage drives, and cable management routes.
3.2. Instalacja płyty głównej
- Zainstaluj osłonę I/O w tylnym otworze obudowy.
- Align your motherboard with the standoffs inside the case. Ensure all standoffs match the motherboard's screw holes.
- Przymocuj płytę główną za pomocą dołączonych śrub.
3.3. Instalacja zasilacza (PSU)
- Znajdź miejsce montażu zasilacza w dolnej tylnej części obudowy.
- Slide the PSU into its designated bay.
- Przymocuj zasilacz za pomocą śrub znajdujących się z tyłu obudowy.

Image 3.2: Rear internal view of the case, illustrating the power supply unit (PSU) mounting area and various drive bays.
3.4. Instalacja dysku pamięci masowej
The case supports multiple 2.5" SSDs and 3.5" HDDs. Refer to the case's internal layout for specific mounting locations.
- Dyski SSD 2.5": Mount SSDs to the dedicated 2.5" brackets, typically located behind the motherboard tray.
- Dyski twarde 3.5": Install HDDs into the drive cages, usually found beneath the PSU shroud.
3.5. Instalacja karty rozszerzeń (GPU)
- Zdejmij niezbędne zaślepki gniazd rozszerzeń z tyłu obudowy.
- Umieść kartę graficzną lub inną kartę rozszerzeń w odpowiednim gnieździe PCIe na płycie głównej.
- Secure the card with screws.

Rysunek 3.3: Wewnętrzny view of the case with a graphics card, CPU cooler, and fans already installed, demonstrating component compatibility and layout.
3.6. Montaż wentylatora i chłodnicy
The XT View Matrix supports up to 9 x 120mm fan positions and full 360mm radiator support at the top. The case includes 3 M25-120 D-RGB fans.
- Mount additional fans or radiators to the designated areas using the provided screws.
- Connect fan and RGB cables to your motherboard or a compatible controller.
3.7. Zarządzanie kablami
Wykorzystaj kanały kablowe i punkty mocowania za tacką płyty głównej, aby uporządkować kable. Poprawia to przepływ powietrza i estetykę.
4. Instrukcja obsługi
4.1. Włączanie
After all components are installed and cables are connected, press the power button located on the front I/O panel to start your system.
4.2. Porty wejścia/wyjścia z przodu
The front I/O panel provides convenient access to:
- 1x USB-C 3.2 Gen2 port
- 1x port USB 3.0
- Przyciski zasilania i resetowania
- Lighting control buttons (no software needed for basic control)
- Mic/Headphone jacks
4.3. 600 LED Matrix Display Control
The integrated 600 LED Matrix screen can display dynamic system statistics, animations, and custom visuals. To fully customize the display, download and install the Phanteks Nexlinq app.

Image 4.1: The 600 LED Matrix screen displaying dynamic content, with an overlay of the Phanteks Nexlinq app interface for customization.

Image 4.2: Various examples of information and patterns that can be displayed on the 600 LED Matrix screen, including system stats and custom graphics.
5. Konserwacja
Regularna konserwacja pomaga zapewnić optymalną wydajność i długowieczność podzespołów komputera.
5.1. Czyszczenie
- Filtry przeciwpyłowe: Periodically remove and clean the dust filters (if applicable) to maintain good airflow.
- Wnętrze: Use compressed air to remove dust from inside the case, especially from fans and heatsinks.
- Zewnętrzny: Przetrzyj zewnętrzne powierzchnie miękką, damp płótno. Unikaj ściernych środków czyszczących.
5.2. Konserwacja wentylatora
Ensure fans are free from obstructions and spinning correctly. If a fan becomes noisy or stops working, consider replacing it.
6. Rozwiązywanie Problemów
Jeśli napotkasz problemy ze swoim komputerem, rozważ poniższe typowe kroki rozwiązywania problemów:
- Brak zasilania: Check all power connections, including the PSU to wall outlet, PSU to motherboard, and front panel power switch cable.
- Fans Not Spinning/No RGB: Verify fan and RGB cables are correctly connected to the motherboard or controller. Check software settings for RGB control.
- LED Matrix Display Issues: Ensure the display cable is securely connected. If using the Nexlinq app, check for software updates or reinstall the application.
- Przegrzanie: Ensure all fans are installed correctly and spinning. Check for dust buildup and clean filters. Verify proper thermal paste application on CPU.
7. Specyfikacje
| Funkcja | Szczegół |
|---|---|
| Marka | Phanteks |
| Nazwa modelu | XT View Matryca |
| Typ sprawy | Mid Tower |
| Kolor | Szary, Biały |
| Tworzywo | Steel alloy, Polyester fabric, ABS, Tempered glass window |
| Wymiary produktu (Gł. x Szer. x Wys.) | 44P x 23l x 50H cm (około 17.3 x 9.1 x 19.7 cala) |
| Waga przedmiotu | 17.5 funtów (około 7.9 kg) |
| Metoda chłodzenia | Water, Air |
| W zestawie wentylatory | 3x M25-120 D-RGB fans |
| Wyświetlacz LED | 600 LED Matrix Screen |
| Przednie wejście/wyjście | 1x USB-C 3.2 Gen2, 1x USB 3.0, Power/Reset, Lighting Control, Mic/Headphone |
| Internal Bays Quantity | 7 (various 2.5" and 3.5" bays) |
| Kompatybilne urządzenia | Desktop, Gaming PC |
| Numer części producenta | PH-XT523VM1_DWT01 |
| Globalny numer identyfikacyjny handlu (GTIN) | 00886523304098 |
8. Gwarancja i wsparcie
Aby uzyskać informacje dotyczące gwarancji i pomocy technicznej, zapoznaj się z oficjalną stroną firmy Phanteks webOdwiedź stronę internetową lub skontaktuj się bezpośrednio z działem obsługi klienta. Zachowaj dowód zakupu na wypadek reklamacji.
Phanteks Official Webstrona: www.phanteks.com





