YOSEC Fireproof Gun Safe Lock Replacement E-816C

Produkt ponadview

This manual provides instructions for the installation, operation, and maintenance of your YOSEC E-816C Electronic Digital Keypad Lock. This lock is designed as a replacement for gun safes and DIY safe boxes, featuring a chrome finish and robust security features.

Key features include a 1-8 digit programmable code, a 3-error code lockout mechanism, and a low battery warning. The keypad diameter is 100mm (3.74 inches).

Informacje dotyczące bezpieczeństwa

• Always ensure the safe is empty and unlocked before performing any installation or maintenance.
• Przechowuj wszystkie elementy, zwłaszcza małe części i baterie, poza zasięgiem dzieci.
• Use only a 9V lithium cell battery (not included) for operation. Do not mix old and new batteries, or different types of batteries.
• Do not attempt to modify the lock mechanism or electronic components, as this may compromise security and void the warranty.
• Ensure the keypad size matches your safe box before installation.

Zawartość opakowania

Sprawdź, czy w opakowaniu znajdują się wszystkie komponenty:

• Klawiatura
• Płytka drukowana (PCB)
• Przycisk resetowania
• Solenoid

Obraz: Ponadview of the YOSEC E-816C lock components, showing the keypad, solenoid, PCB, and reset button. The keypad measures 95mm (3.74 inches) in diameter.

Specyfikacje

Konfiguracja i instalacja

1. Instalacja baterii

1. Locate the battery compartment on the back of the keypad or the designated battery holder.
2. Insert one 9V lithium cell battery, ensuring correct polarity (+/-).
3. Dokładnie zamknij komorę baterii.

Obraz: Rozmontowany view of the lock, illustrating the internal components and where the battery connects.

2. Physical Installation (General Guidelines)

This lock is a replacement unit. Installation typically involves:

1. Removing the existing lock mechanism from your safe door.
2. Mounting the new YOSEC E-816C keypad to the exterior of the safe door.
3. Connecting the solenoid and PCB to the internal locking mechanism of your safe.
4. Ensuring all wires are properly routed and secured to prevent pinching or damage.
5. Test the lock operation before closing the safe door completely.

Note: Specific installation steps may vary depending on your safe model. Consult your safe's manual for detailed instructions on lock replacement.

Instrukcja obsługi

1. Otwieranie zamka

To open the lock, enter your 1-8 digit code followed by the '#' key. The factory default code is typically 159. If the code is correct, the lock will emit a sound (if sound is enabled) and the solenoid will retract, allowing you to open the safe door.

Obraz: Szczegółowy view of the electronic keypad, showing the numerical buttons and special function keys.

2. Zmiana kodu użytkownika

Detailed instructions for changing the user code are typically provided with the lock's internal PCB or a separate quick guide. Generally, the process involves:

1. Entering the current code to open the lock.
2. Pressing a designated programming button (often on the PCB) or a specific key sequence on the keypad.
3. Entering the new 1-8 digit code.
4. Confirming the new code.
5. Always test the new code multiple times with the safe door open before closing it.

3. Silent Mode Operation

The lock can be programmed for silent operation, disabling the buzzer sound. Refer to the specific instructions provided with your lock's PCB for the key sequence to toggle sound on/off.

4. Ostrzeżenie o niskim stanie baterii Battery

The lock features a low battery warning. When the battery is low, the keypad may emit a series of beeps or a specific light indicator will flash after entering a code. Replace the battery promptly when this warning occurs.

5. Funkcja blokady

If 3 incorrect codes are entered consecutively, the lock will enter a lockout mode for 20 seconds, preventing further attempts. Wait for the lockout period to expire before trying again.

Video: How to Operate the Lock

Konserwacja

1. Wymiana baterii

To replace the 9V battery:

1. Ensure the safe is open.
2. Carefully remove the keypad face by pressing the tab counterclockwise or following the specific instructions for your model to access the battery compartment.
3. Wyjmij starą baterię 9V.
4. Insert a new 9V lithium cell battery, observing polarity.
5. Reattach the keypad face.
6. Test the lock operation.

2. Czyszczenie

Wipe the keypad surface with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or electronic components.

Rozwiązywanie problemów

Gwarancja i wsparcie

For warranty information or technical support, please contact the seller, hongon, or the manufacturer, YOSEC. Retain your purchase receipt for warranty claims.

Kontakt ze sprzedawcą: hongon on Amazon