Produkt ponadview
This Transwon Tempered Glass Screen Protector is designed to safeguard your Evermyth 10-inch tablet (models KB1001 and KB1004) and AUMI AI OS KB1001 10.1-inch tablet from scratches, impacts, and daily wear. It offers superior protection while maintaining the original clarity and touch sensitivity of your device's screen. The ultra-thin design ensures a natural viewing experience and smooth operation.
Each package includes two screen protectors, providing a convenient spare. The protector features 2.5D rounded edges for a comfortable grip and seamless integration, along with 9H hardness for robust defense against damage.
Image: Transwon Tempered Glass Screen Protector for Evermyth 10-inch Tablet. This image shows the screen protector itself and its packaging, highlighting its clear, protective nature.
Co jest w pudełku
Twoja paczka powinna zawierać następujące elementy:
- 2 x Transwon Tempered Glass Screen Protectors
- 1 x Dust-absorber
- 1 x Guide Sticker set
Instrukcja instalacji (konfiguracja)
Follow these steps for a bubble-free installation:
- Clean the Tablet Screen: Use an alcohol wipe (not included, but recommended) to thoroughly clean the tablet screen. Ensure all smudges, fingerprints, and oils are removed.
- Wysusz ekran: Use a clean, lint-free cloth (not included, but recommended) to dry the screen completely. Make sure no lint or dust particles remain.
- Usuń kurz: Use the included dust-absorber sticker to gently dab the screen and pick up any remaining dust particles. This step is crucial for preventing bubbles.
- Wyrównaj folię ochronną ekranu: Carefully peel off the protective film from the adhesive side of the tempered glass. Hold the screen protector by its edges and align it precisely with your tablet's screen, paying attention to cutouts for cameras and sensors. The included guide stickers can assist in holding the protector in place for alignment.
- Zastosuj Protector: Once aligned, gently lower the screen protector onto the tablet screen. It will begin to adhere automatically.
- Usuń bąbelki: If any bubbles appear, gently push them towards the edges of the screen using a soft cloth or a plastic card. Most small bubbles will disappear within 24-48 hours.
Tip: Perform installation in a dust-free environment to minimize airborne dust.
Użytkowanie (operacyjne)
Once installed, your Transwon Tempered Glass Screen Protector requires no special operation. It is designed to be fully transparent and maintain the original touch sensitivity of your tablet. You can use your tablet as usual, enjoying enhanced protection without compromising display quality or responsiveness.
Konserwacja
To keep your screen protector clean and clear:
- Wipe the surface gently with a soft, lint-free cloth.
- W przypadku uporczywych plam delikatnieampPrzetrzyj ściereczkę wodą lub płynem do czyszczenia ekranów przeznaczonym do urządzeń elektronicznych. Unikaj silnych środków chemicznych i materiałów ściernych.
- Do not apply excessive pressure when cleaning, as this could potentially damage the screen protector or the tablet screen underneath.
Rozwiązywanie problemów
| Problem | Rozwiązanie |
|---|---|
| Bąbelki po instalacji | Small bubbles often disappear within 24-48 hours. For larger bubbles, gently lift the nearest edge of the protector and re-apply, pushing the bubble out with a soft cloth. Ensure the screen is dust-free before re-application. |
| Dust under the protector | This requires re-application. Carefully lift the protector, use a dust-absorber sticker to remove the dust from both the screen and the adhesive side of the protector, then re-apply. |
| Niewspółosiowość | If the protector is significantly misaligned, carefully lift it from one corner and re-align. If the adhesive is compromised, use the second protector provided. |
| Zmniejszona wrażliwość na dotyk | Ensure the protector is fully adhered without air gaps. If the issue persists, it might be a rare compatibility issue, though this protector is designed for optimal touch response. |
Specyfikacje
- Marka: Transwon
- Numer modelu: SMA0170-US1
- Tworzywo: Szkło hartowane
- Twardość przedmiotu: 9H
- Dodatek specjalny: 9H Surface Hardness, 2.5D Rounded Edges
- Kolor: Jasne
- Wymiary produktu: 9.67" dł. x 5.93" szer. (24.56 cm x 15.06 cm)
- Waga przedmiotu: 7.4 uncji (209.79 grama)
- Zgodne urządzenia: Evermyth 10 inch Tablet model KB1001, Evermyth 10 inch Tablet model KB1004, AUMI AI OS KB1001 10.1 inch Tablet
- Rodzaj wykończenia: Lśniący
Gwarancja i wsparcie
Specific warranty details for this product are not provided in the available information. Please refer to the official Transwon website or contact their customer support for comprehensive warranty information and assistance.
For further support or inquiries, you may visit the Transwon Store on Amazon or consult the manufacturer's official webstrona.