LAMTTO carplay wireless adapter

LAMTTO 2-in-1 Wireless CarPlay and Android Auto Adapter

Model: Wireless CarPlay and Android Auto Adapter

Marka: LAMTTO

1. Wprowadzenie

The LAMTTO 2-in-1 Wireless CarPlay and Android Auto Adapter converts your vehicle's wired CarPlay or Android Auto system into a wireless solution. This device allows for convenient access to navigation, music, phone calls, and voice assistants like Siri or Google Assistant without the need for a physical cable connection to your smartphone.

Zawartość opakowania:

  • 1 x 2-in-1 Wireless CarPlay and Android Auto Adapter
  • 1 x przejściówka z USB-A na USB-C
  • 1 x Instrukcja obsługi

2. Informacje dotyczące bezpieczeństwa

Ważne instrukcje bezpieczeństwa:

  • When operating this wireless adapter, interference with other nearby wireless devices may occur.
  • Ensure compliance with battery handling instructions (if applicable to connected devices).
  • Nie wystawiaj urządzenia na działanie ekstremalnych temperatur lub wilgoci.

3. Koniec produktuview

The LAMTTO 2-in-1 adapter features a high-performance 5.8 GHz chip for faster processing and a stable connection. Its compact design allows for discreet installation, maintaining a tidy vehicle interior. The device supports both USB-A and USB-C ports for flexible connectivity.

Image showing the compact size of the LAMTTO wireless adapter, measuring 2.48 inches (6.3 cm) in length and 1.14 inches (2.9 cm) in width, compared to a larger, less stable alternative.

Figure 3.1: Compact design of the LAMTTO adapter.

Image illustrating the internal components of the LAMTTO wireless adapter, highlighting the USB and Type-C ports and emphasizing stable and fast connection speeds, with first connection taking 15-30 seconds and auto-reconnect taking 5-15 seconds.

Figure 3.2: Internal components and connection speed.

4. Przewodnik konfiguracji

The adapter offers a simple Plug & Play setup process. No applications or drivers are required.

  1. Podłącz adapter: Plug the adapter into your car's USB data port (either USB-A or USB-C, using the provided adapter if necessary).
  2. Activate Bluetooth and Wi-Fi: W swoim smartfonie włącz Wi-Fi i Bluetooth.
  3. Sparuj z Bluetoothem: Open your smartphone's Bluetooth interface, search for the adapter's Bluetooth name, and select "Connect."
  4. Automatyczne ponowne połączenie: After the initial connection, the device will automatically connect to your vehicle each time you start the car.

Notatka: The connection method for both CarPlay and Android Auto is identical.

Image showing a three-step setup process: 1. Plug in the adapter to the car's USB port. 2. Pair Bluetooth and keep Wi-Fi enabled on the smartphone. 3. Use Android Auto or CarPlay on the car's display. Below, it shows how the adapter supports original car controls via touchscreen, OEM buttons, steering wheel, and voice assistant.

Figure 4.1: Step-by-step setup and control methods.

5. Instrukcja obsługi

Once connected, the adapter enables wireless access to your smartphone's features through your car's infotainment system. You can control functions using the car's original controls.

  • Sterowanie głosowe: Możesz obsługiwać urządzenie bez użycia rąk za pomocą Siri lub Asystenta Google.
  • Nawigacja: Access map applications like Waze or Apple Maps.
  • Odtwarzanie muzyki: Stream music from apps like Spotify.
  • Rozmowy telefoniczne: Make and receive calls directly through the car's system.
  • Sterowanie pojazdem: The adapter integrates seamlessly with your car's steering wheel buttons, touchscreen, and factory knobs.
Image displaying a car's infotainment screen showing various applications like Phone, Music, Maps, Messages, and Podcasts, indicating wireless connectivity for multi-function use. Smaller insets show examples of phone calls, map navigation, and music playback.

Figure 5.1: Wireless multi-function display on car screen.

6. Firmware Update (OTA)

The adapter supports Over-The-Air (OTA) firmware updates to ensure optimal performance and compatibility. To update the firmware:

  1. Connect your smartphone to the adapter's Wi-Fi network.
  2. Open a mobile browser on your smartphone.
  3. Wpisz adres 192.168.1.101 in the browser's address bar.
  4. Postępuj zgodnie z instrukcjami wyświetlanymi na ekranie, aby sprawdzić dostępność aktualizacji i je zainstalować.
Image depicting an online firmware update process (OTA) for the adapter. A smartphone screen shows a browser interface with the address 192.168.1.101, indicating an 'Online Update' section and a 'Your software is up to date' message.

Figure 6.1: OTA firmware update interface.

7. Zgodność

The LAMTTO 2-in-1 Wireless CarPlay and Android Auto Adapter is designed for wide compatibility.

  • Kompatybilność ze smartfonami: Supports iPhone 8 or newer (iOS 11+) and Android phones with Android 11+.
  • Zgodność pojazdu: Compatible with over 98% of vehicles equipped with factory-wired Apple CarPlay and Android Auto from the year 2016 onwards. This includes brands such as Ford, Audi, Toyota, VW, and more.
  • Niezgodne pojazdy: Not compatible with BM-W, Ben-z, or Tes-la vehicles. Not compatible with Huawei phones.
Image showing compatibility with various car brands like Wuling, BAIC, Mazda, Hyundai, Chana, VW, Volvo, Buick, Honda, Volkswagen, Porsche, Ford, Cadillac, Land Rover, and more. It also indicates compatibility with iOS 10+ and Android 11+ smartphones, with a note that it's not compatible with Huawei phones.

Figure 7.1: Device and vehicle compatibility overview.

8. Rozwiązywanie Problemów

If the device experiences abnormal operation:

  • Perform a restart by unplugging the adapter and then reinserting it into the car's USB port.
  • Ensure your smartphone's Wi-Fi and Bluetooth are active and properly paired.
  • Check for any available firmware updates as described in Section 6.

9. Specyfikacje

FunkcjaSpecyfikacja
MarkaLAMTTO
Nazwa modelucarplay wireless adapter
Technologia łącznościBluetooth, 802.11ac (5.8 GHz WLAN)
Źródło zasilaniaCorded Electric (via car's USB port)
TworzywoPlastikowy
Waga produktu20 gram
KolorCzarny
Kompatybilne urządzeniaSmartphones with iOS 10+ and Android 11+
Typ montażuWall Mount (refers to compact, discreet placement)
Typ instalacjiBezprzewodowy
Typ złączaUSB Type C (with included USB-A adapter)
Metoda kontroliGłos
Typ wyjścia audioBluetooth, pomocniczy
Tryb wyjścia audioStereofoniczny
Obsługiwane formatyBluetooth 5.3, IEEE 802.11ac
Obsługiwane aplikacjeSpotify, Waze, Apple Maps, other CarPlay/Android Auto compatible audio apps

10. Gwarancja i wsparcie

The LAMTTO 2-in-1 Wireless CarPlay and Android Auto Adapter comes with a 24-month warranty. For any product inquiries or technical assistance, please contact customer support. Support is available 24/7.

© 2026 LAMTTO. Wszelkie prawa zastrzeżone.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.