Polibi B0FT2CPQMG

Polibi 3-in-1 U-Shaped Sleeper Sofa Instruction Manual

Model: B0FT2CPQMG

Wstęp

Thank you for choosing the Polibi 3-in-1 U-Shaped Sleeper Sofa. This versatile furniture piece is designed to provide comfort and functionality, easily transforming from a spacious U-shaped sofa to a relaxing lounge or a convenient pull-out bed. It features integrated USB charging ports and removable armrests for enhanced adaptability. Please read this manual thoroughly before assembly and use to ensure proper setup and long-lasting enjoyment of your new sofa.

Informacje dotyczące bezpieczeństwa

  • Przechowuj wszystkie elementy montażowe poza zasięgiem dzieci.
  • Przed użyciem upewnij się, że wszystkie śruby i wkręty są mocno dokręcone. Regularnie sprawdzaj i dokręcaj w razie potrzeby.
  • Nie stawaj i nie skacz na sofie.
  • Unikaj umieszczania gorących przedmiotów bezpośrednio na tkaninie.
  • Nie przekraczać maksymalnego udźwigu wynoszącego 544 kg (1200 funtów).
  • Use caution when converting the sofa to a bed to avoid pinching fingers or clothing.
  • Only use the provided USB ports for charging compatible electronic devices. Do not overload.

Zawartość opakowania

Przed rozpoczęciem montażu należy sprawdzić, czy wszystkie elementy są obecne. Jeśli brakuje którejkolwiek części lub jest ona uszkodzona, prosimy o kontakt z działem obsługi klienta.

  • Modular Sofa Sections (typically 3-5 sections for a U-shape)
  • Removable Armrests (2 units)
  • Poduszki pod plecy
  • Seat Cushions (integrated into modular sections)
  • Pillows (for lumbar support)
  • Legs (typically plastic)
  • Sprzęt montażowy (śruby, podkładki, klucz imbusowy)
  • Instrukcja obsługi

Instrukcja montażu

Assembly typically requires two adults. Clear a spacious area for assembly. Do not fully tighten all bolts until all sections are aligned.

  1. Rozpakuj komponenty: Ostrożnie wyjmij wszystkie części z opakowania. Połóż je na czystej, miękkiej powierzchni, aby zapobiec zarysowaniom.
  2. Zamontuj nogi: Locate the sofa legs and attach them to the bottom of each modular section. Ensure they are securely fastened.
  3. Połącz sekcje modułowe: Arrange the modular sections into the desired U-shape configuration. Use the provided connectors (usually metal brackets) to link the sections together. Ensure a snug fit.
  4. Montaż podłokietników: Slide the removable armrests onto the designated slots on the end sections of the sofa. Ensure they are firmly seated.
  5. Umieść poduszki: Position the back cushions and any additional pillows onto the sofa.
  6. Ostateczne dokręcanie: Once all sections are aligned and connected, fully tighten all bolts and screws.
Assembled Polibi U-Shaped Sleeper Sofa in Light Grey

Figure 1: Fully assembled Polibi U-Shaped Sleeper Sofa.

Detail of Polibi Sofa showing detachable armrest and deep seat cushion

Figure 2: Detail showing the detachable armrest and deep seat cushion design.

Instrukcja obsługi

Przekształcenie w łóżko rozkładane

The Polibi U-Shaped Sleeper Sofa can be easily converted into a comfortable bed. The central section of the sofa features a pull-out mechanism.

  1. Oczyść obszar: Ensure there is enough space in front of the sofa for the pull-out section to extend fully.
  2. Wysuwane łóżko: Grasp the handle or edge of the central seat cushion and gently pull it outwards. The hidden bed mechanism will slide out and lift into place, creating a flat sleeping surface.
  3. Return to Sofa: To convert back to a sofa, push the extended section back into the sofa frame until it locks securely in place.
Polibi U-Shaped Sleeper Sofa in sofa and pull-out bed configurations with USB port detail

Figure 3: Top image shows the sofa configuration, bottom image shows the pull-out bed configuration with a USB port visible.

Polibi U-Shaped Sleeper Sofa in pull-out bed configuration, light grey

Figure 4: The sofa fully extended into a bed configuration.

Korzystanie z portów ładowania USB

The sofa includes built-in USB charging ports for your convenience.

  • Locate the USB ports, typically on the side of the armrests or within a storage compartment.
  • Podłącz kabel ładujący USB swojego urządzenia do portu.
  • Ensure the sofa is connected to a power source if required (check power cord connection, if applicable).
Close-up of Polibi Sofa showing USB charging port on armrest

Figure 5: Detail of the USB charging port located on the armrest.

Removing/Adjusting Armrests

The armrests are designed to be removable for increased flexibility or to create more space.

  • To remove, gently lift the armrest straight up from its slot.
  • To reattach, align the armrest with the slots and push down firmly until it is securely seated.

Konserwacja i pielęgnacja

Chenille Fabric Care

  • Regularne czyszczenie: Regularnie odkurzaj sofę za pomocą końcówki przeznaczonej do tapicerki, aby usunąć kurz i luźne zanieczyszczenia.
  • Czyszczenie punktowe: W przypadku rozlania natychmiast osusz czystą, suchą ściereczką. Nie pocieraj, ponieważ może to rozprzestrzenić plamę. W przypadku uporczywych plam użyj łagodnego środka do czyszczenia tkanin przeznaczonego specjalnie do tkanin szenilowych, najpierw testując w niewidocznym miejscu.
  • Unikaj bezpośredniego światła słonecznego: Długotrwałe narażenie na bezpośrednie działanie promieni słonecznych może powodować blaknięcie. Ustaw sofę z dala od bezpośredniego światła słonecznego lub użyj zasłon/żaluzji.
  • Profesjonalne czyszczenie: Jeśli zależy Ci na dogłębnym czyszczeniu, rozważ skorzystanie z usług profesjonalnego czyszczenia tapicerki.

Opieka ogólna

  • Rama i nogi: Wytrzyj ramę i nogi miękką szmatką.amp płótno. Unikaj ostrych środków chemicznych.
  • Pielęgnacja poduszek: Rotate and fluff cushions periodically to maintain their shape and extend their lifespan.
  • Sprawdzenie sprzętu: Periodically check all assembly hardware and re-tighten if necessary to ensure stability.
Polibi Sofa construction details showing Chenille fabric, foam, springs, and wood frame

Figure 6: Illustration of the sofa's construction materials, including high-quality Chenille fabric and high resilience foam.

Rozwiązywanie problemów

ProblemMożliwa przyczynaRozwiązanie
Sofa wydaje się niestabilna lub chwiejna.Loose assembly hardware or uneven legs.Check and tighten all bolts and screws. Ensure legs are evenly placed on the floor.
Mechanizm wysuwanego łóżka jest sztywny lub trudny w obsłudze.Przeszkoda lub mechanizm nie są dostosowane.Ensure no objects are blocking the mechanism. Gently pull or push, ensuring even force. Do not force.
Porty USB nie służą do ładowania urządzeń.Sofa not connected to power, faulty cable, or device incompatibility.Verify the sofa's power cord (if applicable) is plugged into a working outlet. Try a different USB cable or device.
Tkanina wydaje się odbarwiona lub wyblakła.Prolonged exposure to direct sunlight or improper cleaning.Avoid direct sunlight. Refer to Chenille fabric care instructions.

Specyfikacje

Markapolibi
Numer modeluB0FT2CPQMG
Typ3-in-1 Convertible U-Shaped Sleeper Sofa
KolorJasnoszary
Liczba miejsc siedzących5
Wymiary produktu (Gł. x Szer. x Wys.)104.7" gł. x 49.6" szer. x 42.9" wys.
TworzywoFrame: Iron+Wood, Upholstery: Chenille, Legs: Plastic, Cushion Filling: Cotton
Cechy specjalneRemovable Armrests & Chaise, USB Ports
Nośność1200 funta (544 kg)

Informacje o gwarancji

Polibi products are manufactured to high-quality standards and are backed by a limited warranty against manufacturing defects. For specific warranty terms and conditions, please refer to the warranty card included with your product or contact Polibi customer support. Keep your proof of purchase for warranty claims.

Obsługa klienta

If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact Polibi customer support:

© 2023 Polibi. Wszelkie prawa zastrzeżone.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.