Instrukcja obsługi skutera elektrycznego TODIMART T3

1. Wprowadzenie

Thank you for choosing the TODIMART T3 Electric Scooter. This manual provides essential information for the safe operation, assembly, maintenance, and troubleshooting of your scooter. Please read this manual thoroughly before your first ride to ensure proper use and to maximize the lifespan of your device. Keep this manual for future reference.

The TODIMART T3 Electric Scooter in use, demonstrating its sleek design and portability.

2. Informacje dotyczące bezpieczeństwa

Your safety is paramount. Always wear a helmet and appropriate protective gear (knee pads, elbow pads) when riding. Adhere to all local traffic laws and regulations regarding electric scooters. Do not ride in adverse weather conditions, on slippery surfaces, or at night without proper lighting. Avoid riding under the influence of alcohol or drugs. This scooter is designed for one rider only and has a maximum load capacity of 120 kg.

• Zawsze noś kask i sprzęt ochronny.
• Należy przestrzegać lokalnych przepisów i regulacji ruchu drogowego.
• Do not ride in rain, snow, or on icy surfaces.
• Zadbaj o odpowiednie oświetlenie podczas jazdy nocą.
• Maksymalne obciążenie: 120 kg.
• Nieodpowiednie dla dzieci poniżej 12 lat.

3. Zawartość opakowania

Upon opening the box, please verify that all items listed below are present and in good condition:

• Hulajnoga elektryczna TODIMART T3
• Ładowarka
• Narzędzia montażowe (klucz imbusowy, śruby)
• Instrukcja obsługi

Jeśli brakuje jakichkolwiek elementów lub są one uszkodzone, prosimy o natychmiastowy kontakt z działem obsługi klienta.

4. Montaż i konfiguracja początkowa

The TODIMART T3 Electric Scooter comes partially assembled. Follow these steps to complete the setup:

1. Rozpakowywanie: Ostrożnie wyjmij hulajnogę i wszystkie akcesoria z opakowania.
2. Montaż kierownicy: Lift the handlebar stem to an upright position. Secure the folding mechanism latch. Attach the handlebars to the stem using the provided screws and Allen wrench. Ensure they are firmly tightened.
3. Kickstand Deployment: Locate the kickstand on the side of the scooter deck and deploy it to keep the scooter upright during assembly.
4. Opłata początkowa: Before first use, fully charge the scooter's battery. Connect the charger to the charging port located on the side of the deck, then plug it into a power outlet. The indicator light on the charger will change (e.g., red to green) when fully charged.

Video demonstrating the unboxing, assembly, folding, and initial charging process of the TODIMART T3 Electric Scooter.

Connecting the charger to the TODIMART T3 Electric Scooter.

5. Koniec produktuview

Familiarize yourself with the main components of your TODIMART T3 Electric Scooter:

• Kierownica: Features non-slip grips, accelerator, brake lever, bell, and integrated display.
• Wyświetlacz: Digital screen showing speed, battery level, and driving mode.
• Światła przednie i tylne: Integrated LED lights for visibility and safety. The taillight also functions as a brake light.
• Silnik: 350W brushless motor for efficient propulsion.
• Bateria: 36V 7.8Ah lithium-ion battery housed within the deck.
• Koła: 8.5-inch solid honeycomb tires, puncture-resistant for durability.
• Hamulce: Dual braking system with electronic front brake and mechanical disc rear brake.
• Mechanizm składania: Quick-release lever for easy folding and portability.
• Talia kart: Anti-slip surface for rider stability.

Szczegółowy view of the handlebar and integrated display.

The scooter's digital display and app connectivity features.

The 8.5-inch puncture-resistant honeycomb tires.

6. Działanie

6.1 Włączanie/wyłączanie zasilania

Press and hold the power button on the display for 2-3 seconds to turn the scooter on or off.

6.2 Tryby jazdy

The TODIMART T3 offers three driving modes:

• Tryb ekologiczny: Energy-saving mode for extended range and lower speeds (approx. 10 km/h).
• Tryb D: Standard mode for balanced speed and range (approx. 20 km/h).
• Tryb S: Sport mode for maximum speed and performance (up to 25 km/h).

Press the power button briefly to cycle through the modes. The current mode will be displayed on the screen.

6.3 Sterowanie aplikacją (Bluetooth)

Connect your TODIMART T3 to the dedicated mobile app via Bluetooth for enhanced control and features:

1. Download the TODIMART app from your smartphone's app store.
2. Upewnij się, że Bluetooth jest włączony w Twoim smartfonie i hulajnoga jest włączona.
3. Open the app and follow the on-screen instructions to pair your scooter. You may need to reset the device by pressing the reset button (if applicable) to enter pairing mode.
4. Once connected, you can access features such as locking/unlocking, customizing maximum speed, activating cruise control, and viewing ride statistics.

Video demonstrating the app connection process and various riding modes of the TODIMART T3 Electric Scooter.

7. Składanie i rozkładanie

The TODIMART T3 is designed for easy portability with its 3-second folding mechanism:

7.1 Składane

1. Upewnij się, że hulajnoga jest wyłączona.
2. Locate the folding lever at the base of the handlebar stem.
3. Pull the lever to release the stem and carefully fold it downwards until it clicks into place, securing it to the rear fender.

7.2 Rozkładanie

1. Release the stem from the rear fender.
2. Lift the handlebar stem upwards until the folding mechanism clicks securely into its upright position. Ensure the latch is fully engaged before riding.

Illustrations of the folding process for the TODIMART T3 Electric Scooter.

8. Konserwacja

Regularna konserwacja zapewnia długowieczność i bezpieczną eksploatację skutera:

• Czyszczenie: Wytrzyj skuter reklamąamp cloth after each use. Do not use high-pressure water or corrosive cleaners.
• Opony: Although puncture-resistant, regularly inspect tires for wear and tear.
• Hamulce: Check brake functionality before each ride. Adjust if necessary.
• Pielęgnacja baterii: Charge the battery regularly, even if not in use, to maintain its health. Avoid fully discharging the battery. Store the scooter in a cool, dry place.
• Elementy złączne: Okresowo sprawdzaj, czy wszystkie śruby i nakrętki są dobrze dokręcone.

9. Rozwiązywanie Problemów

If you encounter issues with your TODIMART T3, refer to the following common problems and solutions:

For issues not listed here, please contact TODIMART customer support.

10. Specyfikacje

11. Gwarancja i wsparcie

The TODIMART T3 Electric Scooter comes with a limited 1-year warranty. Spare parts availability is guaranteed for 3 years. For warranty claims, technical support, or any inquiries, please contact TODIMART customer service through the details provided on your purchase receipt or the official TODIMART webstrona.