Mould King 10166 Tech Oldtimer Sports Car Building Kit Instruction Manual

1. Wprowadzenie

This manual provides detailed instructions for assembling and understanding the features of your Mould King 10166 Tech Oldtimer Sports Car Building Kit. This kit allows you to construct a detailed vintage racing car model using 1147 interlocking building blocks. Please read all instructions carefully before beginning assembly.

Image 1.1: The fully assembled Mould King 10166 Tech Oldtimer Sports Car model.

2. Informacje dotyczące bezpieczeństwa

• Ryzyko zadławienia: This kit contains small parts and is not suitable for children under 3 years of age.
• Zalecany wiek: Suitable for ages 8 years and up. Adult supervision is recommended for younger builders.
• Aby zapobiec uduszeniu, wszystkie materiały opakowaniowe należy przechowywać w miejscu niedostępnym dla dzieci.
• Nie należy połykać żadnych elementów budulcowych.

3. Zawartość opakowania

Po otwarciu opakowania należy sprawdzić, czy znajdują się w nim wszystkie elementy:

• 1147 x Building Block Pieces (sorted into numbered bags)
• 1 x Instrukcja obsługi

If any pieces are missing or damaged, please refer to the "Warranty and Support" section for assistance.

4. Instrukcja montażu i konfiguracji

Follow these steps to assemble your Mould King Tech Oldtimer Sports Car:

1. Przygotowanie: Clear a spacious, well-lit work area. Open the building block bags one by one, following the numbered sequence indicated in the instruction manual. The blocks are packed in independent, numbered bags to simplify the assembly process.
2. Postępuj zgodnie z instrukcją: Refer to the included instruction manual. Each step is clearly numbered and illustrated, making the assembly process straightforward.
3. Identyfikacja elementu: Carefully identify the correct pieces for each step. The manual provides visual guides for piece recognition.
4. Łączenie: Ensure each block is firmly interlocked with the previous one to create a stable structure.
5. Kluczem jest cierpliwość: Take your time with each step. Building this model promotes practical skills, creativity, and imagination.

The instruction manual is designed to be easy to follow, even for those new to building block kits.

5. Obsługa i funkcje

Once assembled, your Mould King Tech Oldtimer Sports Car model features several interactive and detailed elements:

• Detailed Body Design: Observe the streamlined body, distinctive grille, and replicated headlights.
• Otwieranie drzwi: The car doors can be opened to reveal a detailed cockpit.
• Wnętrze kokpitu: Inside the cockpit, you will find a dashboard, steering wheel, and seats.
• Otwieranie maski: The bonnet (hood) can be opened to display a highly realistic engine model with intricate details.
• Opening Boot: The boot (trunk) can also be opened, providing additional display space.
• Zgodność: This building set is compatible with most mainstream brick brands, allowing for creative expansion and customization.

Image 5.1: Detailed features including the opening bonnet, cockpit, grille, and boot.

6. Konserwacja

To ensure the longevity and appearance of your model, follow these maintenance guidelines:

• Czyszczenie: Gently wipe the model with a soft, slightly damp cloth to remove dust. Avoid using harsh chemicals or abrasive cleaners.
• Składowanie: Przechowuj model w chłodnym i suchym miejscu, z dala od bezpośredniego światła słonecznego, aby zapobiec odbarwieniu lub degradacji materiału.
• Obsługiwanie: Obchodź się z modelem ostrożnie, aby uniknąć przypadkowego rozmontowania lub uszkodzenia delikatnych części.

7. Rozwiązywanie Problemów

Jeśli podczas montażu lub w trakcie użytkowania gotowego modelu napotkasz jakiekolwiek problemy, weź pod uwagę następujące kwestie:

• Brakujące elementy: Double-check all bags and the work area. If a piece is genuinely missing, refer to the "Warranty and Support" section for contact information.
• Stopień trudności montażu: Review the instruction manual for the specific step. Ensure you are using the correct pieces and that they are oriented correctly. Sometimes, a firm press is needed to interlock blocks.
• Luźne połączenia: If parts feel loose, ensure they are fully pressed together. Disassemble and reassemble the section if necessary.

8. Specyfikacje

Image 8.1: Product dimensions of the assembled model.

9. Gwarancja i wsparcie

Mould King products are manufactured to high-quality standards. This product is covered by a standard manufacturer's warranty against defects in materials and workmanship.

For warranty claims, missing parts, or technical support, please contact Mould King customer service through their official website or the retailer from whom the product was purchased. Please have your model number (WX10166-LYF) and proof of purchase ready.