Instrukcja obsługi akumulatora LiFePO4 Redodo 12 V 100 Ah i ładowarki 12 V/16 V 10 A

1. Wprowadzenie

This manual provides essential instructions for the safe and efficient operation, installation, and maintenance of your Redodo 12V 100Ah LiFePO4 Battery and its accompanying 12V/16V 10A Charger. Please read this manual thoroughly before using the product to ensure proper function and longevity.

2. Koniec produktuview

The Redodo 12V 100Ah LiFePO4 Battery is designed for deep cycle applications, featuring Bluetooth monitoring and low-temperature protection. It is paired with a versatile 12V/16V 10A charger.

Główne cechy:

• Monitorowanie Bluetooth: Integrated Bluetooth 5.0 BMS allows real-time monitoring of voltage, current, power, and capacity via a smartphone app. Remote discharge/cutoff control is available within a 10-meter range.
• Kompaktowy rozmiar: Group 24 dimensions (6.61 x 10.24 x 8.27 inches) offer a space-saving solution, fitting where larger Group 31/27 batteries might not.
• Adjustable Charger Voltage: The included charger supports both 12V and 16V lithium batteries, with an easy-to-use button for voltagi wybór.
• Szybkie ładowanie: The 10A charger provides up to 18.25V, capable of charging a 16V 50Ah LiFePO4 battery to 50% in 2.5 hours.
• Lekka konstrukcja: Weighing only 21.8 lbs, it is approximately 65% lighter than comparable AGM batteries.
• Ochrona zaawansowana: Equipped with a Bluetooth-monitored BMS offering over 20 protections, including overcharge, over-discharge, short-circuit, and low-temperature cut-off.
• Długa żywotność: Utilizes EV-grade LFP cells, providing 4,000-15,000 cycles and an expected lifespan of over 10 years.
• Rozszerzalna pojemność: Supports up to 4P4S configurations for a maximum energy of 20.48 kWh, suitable for solar systems.

Zawartość pudełka:

• Akumulator LiFePO4 Bluetooth 12.8 V 100 Ah z wyłącznikiem niskotemperaturowym
• Nakładki izolacyjne na śruby
• Śruby zaciskowe M8-5/8"

Figure 1: Redodo 12V 100Ah LiFePO4 Battery, 12V/16V 10A Charger, and Bluetooth App Interface.

3. Informacje dotyczące bezpieczeństwa

OSTRZEŻENIE:

• Do not use this battery as a car battery, starter battery, or golf cart battery. This battery is designed for deep cycle applications only.
• Upon arrival, it is essential to charge the battery with a dedicated lithium iron phosphate charger with 0V capability in order for it to function properly.
• Always ensure correct polarity when connecting the battery to avoid damage to the battery or connected devices.
• Nie wolno zwierać zacisków akumulatora.
• Nie rozbieraj, nie przekłuwaj ani nie modyfikuj akumulatora.
• Trzymaj akumulator z dala od ognia, źródeł ciepła i bezpośredniego światła słonecznego.
• Przechowuj akumulator w chłodnym, suchym i dobrze wentylowanym miejscu.
• Podczas obsługi baterii należy nosić odpowiedni sprzęt ochrony osobistej (PPE), taki jak rękawice i okulary ochronne.

4. Konfiguracja

Początkowe ładowanie:

Before first use, the battery must be fully charged with a dedicated LiFePO4 charger that has 0V activation capability. Connect the charger to the battery terminals, ensuring correct polarity (positive to positive, negative to negative), then plug the charger into an AC power source.

Montaż baterii:

The Redodo 12V 100Ah LiFePO4 battery is a Group 24 size, designed for easy drop-in replacement in various applications. Ensure the installation location is secure, well-ventilated, and protected from extreme temperatures and moisture.

Figure 2: Size comparison of Redodo Group 24 battery with Group 27 and Group 31 batteries.

Figure 3: The lightweight design (21.8 lbs) allows for easy handling and installation.

Connecting Multiple Batteries (Optional):

The battery supports up to 4P4S configurations for increased capacity and voltage. When connecting multiple batteries, ensure all batteries are of the same type, capacity, and State of Charge (SOC) before connecting them in series or parallel. Use appropriate cabling and fusing for your system design.

Rysunek 4: Example of Redodo battery integration in an RV solar system.

5. Instrukcja obsługi

5.1 Battery Operation:

Once installed and charged, the battery is ready for use. It is suitable for various deep cycle applications such as RVs, marine vessels, solar energy storage, and off-grid systems. The integrated BMS protects the battery from common issues like overcharge, over-discharge, and short circuits.

5.2 Charger Operation:

The Redodo 12V/16V 10A charger is designed for optimal charging of your LiFePO4 battery.

• TomtagWybór: Use the button on the charger to switch between 12V and 16V charging modes, depending on your battery's requirements.
• Wskaźniki LED: The charger features LED indicators to display its status:
• Ładowanie: Zawsze na czerwono
• W pełni naładowany: Zawsze na zielono
• Czuwanie: Zielony, powolny błysk
• Stopped Manually: Red-green Slow Flash
• In Set or Protection Mode: Czerwono-zielony szybki błysk

Figure 5: Redodo 12V/16V 10A Charger with LED Status Indicators.

5.3 Bluetooth App Monitoring:

Download the Redodo Bluetooth app on your smartphone (available on Google Play and Apple App Store) to monitor your battery's status in real-time.

• Dane w czasie rzeczywistym: View remaining usage time, State of Charge (SOC), voltage, prąd i moc.
• Zdalne sterowanie: The app allows remote control of discharge/cutoff functions within a 10-meter range.

Figure 6: Redodo Bluetooth App Interface for Real-Time Monitoring.

Figure 7: Monitoring battery status with the Redodo app for peace of mind.

6. Konserwacja

• Regularna kontrola: Periodically check battery terminals for corrosion or loose connections. Clean terminals with a wire brush if necessary.
• Ładowanie: Always use a compatible LiFePO4 charger. Avoid overcharging or undercharging the battery.
• Składowanie: If storing the battery for an extended period, ensure it is charged to approximately 50% State of Charge (SOC) and stored in a cool, dry place. Recharge every 3-6 months to prevent deep discharge.
• Temperatura: The battery features low-temperature cut-off protection, but for optimal performance and lifespan, avoid operating or charging in extreme temperatures.

7. Rozwiązywanie Problemów

8. Specyfikacje

9. Gwarancja i wsparcie

Redodo stands behind the quality of its products.

• Gwarancja: Produkt objęty jest 5-letnią gwarancją.
• Długość życia: The battery is designed for a 10+ year lifespan under normal operating conditions.
• Obsługa klienta: For any questions, technical assistance, or warranty claims, please contact Redodo customer support. We aim to provide a 24-hour response to inquiries.

Figure 8: Redodo Warranty and Support Overview.