Jebao SCP-50 Sine Cross Flow Pump Wave Maker Instruction Manual

1. Wprowadzenie

The Jebao SCP-50 Sine Cross Flow Pump is designed to create natural wave-like currents in your reef tank, promoting a healthy environment for aquatic life. Its unique crossflow technology ensures a 360-degree return flow, effectively eliminating dead spots and distributing water evenly throughout the aquarium. This manual provides essential information for the safe and efficient operation of your wave maker.

The pump is capable of moving water at a rate of 396 to 1320 GPH (Gallons Per Hour).

2. Informacje dotyczące bezpieczeństwa

WARNING: Please read all safety instructions before use to prevent injury or damage to the product.

• Ensure the pump is always submerged in water during operation. Running dry will cause damage.
• The maximum water temperature for operation is 35°C (95°F).
• Przed przystąpieniem do prac konserwacyjnych lub obsługi pompy należy zawsze odłączyć zasilanie elektryczne.
• Do not attempt to disassemble or repair the pump or controller yourself. Contact qualified personnel for service.
• Keep the magnetic mount away from children. Strong magnets can pinch fingers.
• Avoid placing the magnetic mount near sensitive electronic devices or magnetic media (e.g., credit cards) to prevent damage.
• Ensure the power cord is not damaged or pinched. Do not operate with a damaged cord.

3. Zawartość opakowania

Sprawdź, czy w opakowaniu znajdują się wszystkie komponenty:

• Jebao SCP-50 Cross Flow Pump
• Kontroler
• AC Adapter (100V-240V, 50/60Hz input; DC 24V, 12W output)

Image: All components included in the Jebao SCP-50 package, including the pump, controller, and AC adapter.

4. Koniec produktuview

Obraz: Bok view of the Jebao SCP-50 Sine Cross Flow Pump, showing its compact design.

Obraz: Góra view of the Jebao SCP-50 Sine Cross Flow Pump, highlighting the cross-flow outlet.

Image: The Jebao SCP-50 pump with its power cable and product label, showing specifications.

Image: Diagram illustrating the dimensions of the Jebao SCP-50 pump: approximately 4.8 inches long and 1.79 inches wide.

5. Konfiguracja

1. Montaż pompy: Position the pump inside your aquarium using the magnetic mount. Place the pump on the desired inner wall of the tank and align the external magnet on the outer wall directly opposite the pump. Ensure the pump is fully submerged and securely attached.
2. Podłączenie kontrolera: Podłącz kabel pompy do wyznaczonego portu w sterowniku.
3. Podłączanie zasilania: Plug the AC adapter into the controller, then plug the AC adapter into a standard electrical outlet.
4. Pierwsze włączenie: The pump will start operating according to the default settings.

6. Operating Modes and Controller Functions

The controller allows you to select various operating modes and adjust settings. The controller features buttons for Prędkość, Światło, Zamek, Moc, I Pompa.

Tryby pracy:

• H — Constant Flow Mode: Provides a steady, continuous flow at the speed you set. This mode is ideal for consistent water circulation.
• W1 — Wave Box (Pulse) Mode: Generates a pulsed output to create a standing wave effect. This mode is suitable for simulating natural ocean currents.
• W2 — Clockwise Circulation Mode: Operates with a normal flow that circulates clockwise. You can set a timer for this mode (4–99 minutes).
• W3 — Reef Mode: Offers a variable, randomized flow pattern designed to mimic natural reef currents, providing dynamic water movement.

Funkcje specjalne:

• Tryb karmienia: Activates a 10-minute pause in pump operation to allow for feeding without food being immediately swept away. This protects your livestock and ensures proper feeding.
• Kierunek: By default, circulation is clockwise unless a specific mode dictates otherwise.

7. Konserwacja

Regular maintenance ensures optimal performance and longevity of your Jebao SCP-50 pump.

• Czyszczenie wirnika: Periodically remove the pump from the tank and carefully disassemble the front cover to access the impeller. Clean any algae, debris, or calcium buildup from the impeller and its housing using a soft brush and freshwater.
• Sprzątanie mieszkań: Clean the pump's exterior and intake/output grates to ensure unrestricted water flow.
• Kontrola kabla: Regularly inspect the power cable and connections for any signs of wear or damage.
• Always ensure the pump is disconnected from power before performing any cleaning or maintenance.

8. Rozwiązywanie Problemów

If you encounter issues with your Jebao SCP-50 pump, refer to the following common troubleshooting steps:

• Pompa nie uruchamia się:
  • Sprawdź, czy zasilacz jest prawidłowo podłączony do kontrolera i gniazdka elektrycznego.
  • Sprawdź, czy kontroler jest włączony.
  • Verify that the pump cable is firmly connected to the controller.
• Weak or No Flow:
  • Disconnect power and inspect the pump's impeller for any obstructions (e.g., debris, algae, snails). Clean thoroughly.
  • Check the pump's intake and output grates for blockages.
  • Upewnij się, że pompa jest całkowicie zanurzona w wodzie.
• Nietypowy hałas:
  • Disconnect power and check the impeller for foreign objects or damage.
  • Upewnij się, że pompa jest solidnie zamontowana i nie wibruje, uderzając o szybę zbiornika.
  • Verify that the pump is fully submerged and not drawing air.

If problems persist after following these steps, please contact Jebao customer support.

9. Specyfikacje

• Model: SCP-50
• Marka: Jebao
• Przepływ: 396 - 1320 GPH (Gallons Per Hour)
• Wymiary (pompa): Około 4.75" (dł.) x 1.75" (szer.) x 1.25" (wys.)
• Źródło zasilania: AC
• Tomtage: 110-240V, 50/60Hz (via AC adapter)
• Wyjście: Prąd stały 24 V, 12 W
• Zawartość zestawu: Pump, Controller, AC Adapter

10. Gwarancja i wsparcie

For warranty information, product support, or service inquiries, please refer to the documentation provided with your purchase or contact Jebao customer service directly. Keep your purchase receipt as proof of purchase.