Huepar SW-T120 3-in-1 Laser Measurement Tool

1. Wprowadzenie

The Huepar SW-T120 is a versatile 3-in-1 measurement tool designed for various applications in construction, home improvement, and DIY projects. It integrates a laser distance meter, a green cross-line laser level, and a traditional 6.5ft tape measure into a single compact device. This manual provides detailed instructions for safe and effective operation of your device.

Image 1.1: The Huepar SW-T120 device demonstrating its three core functionalities: laser distance measurement, green cross-line laser leveling, and a built-in tape measure.

2. Co znajduje się w pudełku

Sprawdź, czy po rozpakowaniu znajdują się wszystkie elementy:

• 1x Huepar SW-T120 3-in-1 Laser Measuring Tool (400ft/120M)
• 1x Auxiliary Measuring Target Plate
• 1x kabel ładujący typu C
• 1x przenośna torba transportowa
• 1x pasek na rękę
• 1x Instrukcja obsługi
• 1x Paper Color Box

Ilustracja 2.1: Wszystkie elementy zawarte w zestawie produktu Huepar SW-T120.

3. Konfiguracja i ładowanie

Before initial use, ensure the device is fully charged. The SW-T120 features a built-in 3.7V / 600mAh Lithium-Ion battery.

1. Ładowanie: Connect the provided Type-C charging cable to the device's charging port and a suitable USB power source. The battery indicator on the display will show charging status.
2. Włączanie/wyłączanie: Naciśnij i przytrzymaj Power ON/Measure przycisk włączający lub wyłączający urządzenie.

Image 3.1: The Type-C charging port and hand strap attachment point on the device.

4. Instrukcja obsługi

4.1 Pomiar odległości laserowej

This mode allows for precise distance measurements up to 400ft (120m) with an accuracy of ±1/16 inch.

1. Aktywować: Naciśnij Power ON/Measure przycisk do aktywacji lasera.
2. Mierzyć: Skieruj laser na punkt docelowy i naciśnij Power ON/Measure Naciśnij przycisk ponownie, aby wykonać pomiar. Wynik zostanie wyświetlony na ekranie.
3. Punkty odniesienia: The device supports measurements from three reference points: front, rear, or screw-hole. Use the Benchmark/Mode switch aby przełączać się między tymi opcjami.

Image 4.1: Understanding the different measurement reference points for accurate readings.

4.2 Green Cross Line Laser Level Mode

The integrated green cross-line laser provides horizontal and vertical lines for leveling and alignment tasks, with a working distance of up to 33ft (10m) and an angle accuracy of ±1°.

1. Aktywować: Naciśnij Laser Level Mode button to project the green cross lines.
2. Niwelacja: Place the device on a stable surface. The screen displays angles from -90° to +90° horizontally. If the angle exceeds ±4°, the 'Out' icon will flash, and the laser line will flash rapidly, indicating it is out of level.
3. Mocowanie do statywu: For enhanced stability and precise positioning, the device features a 1/4"-20 tripod mount.

Image 4.2: Using the green cross line laser level for precise alignment.

4.3 Taśma miernicza

A traditional 6.5ft (2m) physical tape measure is integrated for short-distance measurements or when a laser is not suitable.

• Stosowanie: Pull out the tape measure from the side of the device. Ensure it retracts smoothly after use.

4.4 Measurement Modes and Functions

The SW-T120 supports various measurement calculations:

• Pomiar odległości: Single distance measurement.
• Pomiar powierzchni: Calculates the area of a surface.
• Pomiar objętości: Calculates the volume of a space.
• Indirect Height (Pythagoras): Calculates height using two or three measurements.
• Pomiar ciągły: Zapewnia aktualizacje odległości w czasie rzeczywistym podczas przenoszenia urządzenia.
• Dodawanie/Odejmowanie: Allows for adding or subtracting measurements.

Obraz 4.3: Koniecview of the multiple measurement modes available on the device.

4.5 Transmisja głosowa

The device features real-time voice feedback for measurements, enhancing readability and efficiency, especially in challenging conditions or for users with limited vision.

• Aktywacja: Naciśnij i przytrzymaj JEDNOSTKA button to switch between English voice, Chinese voice, or to turn off the sound.
• Notatka: Voice broadcast is not active while the device is charging.

Ilustracja 4.4: Funkcja transmisji głosowej umożliwia odczytywanie pomiarów w formie dźwiękowej.

4.6 Data Memory and Units

The device can store up to 100 sets of measurement data, allowing for easy recall without manual notes. It also supports multiple measurement units.

• Zapisywanie danych: Valid measurements are automatically saved. The top of the screen indicates how many groups are saved.
• Przełączanie jednostek: Naciśnij JEDNOSTKA button (short press) to cycle through available units: inches (in), feet (ft), meters (m), feet and inches (ft'in"), feet and fractions (ft'in 1/X"), and meters with decimals (m.mm).

Image 4.5: Data memory and unit selection on the device display.

5. Konserwacja i pielęgnacja

• Czyszczenie: Użyj miękkiego, damp Do czyszczenia urządzenia należy używać ściereczki. Nie należy używać środków czyszczących o właściwościach ściernych ani rozpuszczalników.
• Składowanie: Store the device in its portable carrying bag in a dry, cool place when not in use.
• Trwałość: The rugged TPE housing provides resistance against drops, dust, and light water spray (IP54 rated). However, avoid submerging the device in water.

Image 5.1: The device's robust design and accessories for protection and portability.

6. Rozwiązywanie Problemów

• Niedokładne odczyty: Ensure the laser target is clear and unobstructed. Verify the correct reference point (front, rear, screw-hole) is selected. For long distances, use the auxiliary measuring target plate to enhance laser visibility and accuracy.
• Urządzenie niespodziewanie się wyłącza: The device has an auto shut-off feature that activates after 150 seconds of inactivity to conserve battery. This setting cannot be changed. Ensure you are actively using the device or restart it if needed.
• Laser niewidoczny: In bright light conditions, the green laser line may be less visible. Use the auxiliary measuring target plate to help locate the laser spot.

Image 6.1: The auxiliary target plate helps improve laser visibility and measurement accuracy.

7. Specyfikacje

8. Gwarancja i wsparcie

The Huepar SW-T120 laser measuring tool comes with a 2-year quality assurance. Free repair or replacement is provided if the product is found to be faulty under normal use conditions.

For technical support, service inquiries, or warranty claims, please refer to the contact information provided in the product packaging or visit the official Huepar website. Huepar is committed to providing responsive customer service and lifetime technical support.

Image 8.1: Huepar's 2-year quality assurance and service commitment.

9. Film demonstracyjny produktu