1. Wprowadzenie
Thank you for choosing the ALLWEI Portable Power Station. This manual provides essential information for the safe and efficient operation of your device. Please read it thoroughly before use and retain it for future reference.
Zawartość opakowania:
- 1x ALLWEI 300W/256Wh Portable Power Station
- Kabel 1x AC
- 1x DC Car Cable
- 1x Instrukcja obsługi
Note: ALLWEI Solar Panel sold separately.

2. Instrukcje bezpieczeństwa
To ensure safe operation and prolong the lifespan of your power station, please adhere to the following guidelines:
- Nie demontuj, nie naprawiaj ani nie modyfikuj urządzenia.
- Trzymaj urządzenie z dala od źródeł ciepła, bezpośredniego światła słonecznego i materiałów łatwopalnych.
- Unikaj kontaktu z wodą lub wysoką wilgotnością.
- Use only original or certified cables and adapters for charging.
- Podczas użytkowania i ładowania należy zapewnić odpowiednią wentylację.
- The advanced Battery Management System (BMS) provides 6-layer protection against short-circuit, over-current, over-voltage, itp.
3. Koniec produktuview
The ALLWEI Portable Power Station is designed for versatility and ease of use, featuring multiple output ports and a clear display.
Porty i wyświetlacz:


- Gniazdka AC: 1x 110V/300W Max (Pure Sine Wave)
- Wyjścia prądu stałego: 2x DC5521 ports (12V/3A), 1x Car Cigarette Lighter Port (DC12V/8A)
- Porty USB: 1x USB-A Fast Charge (18W), 1x USB-C PD (60W)
- Wyświetlacz: Pokazuje poziom naładowania baterii, moc wejściową/wyjściowątage i szacowany pozostały czas wykonania.
- Światło LED: 3-level adjustable LED light with SOS mode.
4. Konfiguracja
Początkowe ładowanie:
Before first use, fully charge your ALLWEI Portable Power Station. Use the provided AC cable to connect the unit to a wall outlet. The display will indicate charging status. A full charge typically takes 3.5-4 hours via AC wall charging.
5. Instrukcja obsługi
Powering On/Off Outputs:
- To activate AC outputs, press the 'AC' button.
- To activate DC outputs (including car port), press the 'DC' button.
- To activate USB outputs, press the 'USB' button.
- Press the respective button again to turn off the outputs.
Korzystanie ze światła LED:
Press the 'LED' button to turn on the light. Subsequent presses will cycle through 3 brightness levels and an SOS flashing mode. Press and hold to turn off.

Jednoczesne ładowanie:
The power station can charge up to 6 devices simultaneously. The display will update to show the combined output wattage and estimated remaining runtime.

Oficjalne filmy produktowe:
Wideo 1: Showcasing Allwei Portable Power Station. This video provides a general overview and demonstration of the ALLWEI Portable Power Station's features and functionality.
Video 2: Allwei for the win! This short video highlights the convenience and reliability of the ALLWEI Portable Power Station in various scenarios.
6. Ładowanie elektrowni
The ALLWEI Portable Power Station offers multiple flexible recharging options:
- Ładowanie ścienne AC: Fully recharges in 3.5-4 hours using the provided AC cable.
- Ładowanie samochodu 12 V: Fully recharges in 3.5-4 hours using the provided DC car cable.
- Ładowanie panelu słonecznego: Fully recharges in 4-5 hours with a 100W solar panel (sold separately). The built-in MPPT controller optimizes solar charging efficiency.
- Podwójne ładowanie (prąd przemienny + energia słoneczna): Achieve a full recharge in just 2-2.5 hours by combining AC wall charging and solar panel input.

7. Konserwacja
Składowanie:
Store the power station in a cool, dry place away from direct sunlight and extreme temperatures. For optimal battery health, recharge the unit every 3-6 months, even if not in use, to maintain a charge level above 50%.
Czyszczenie:
Przetrzyj zewnętrzną część stacji zasilającej miękką, suchą ściereczką. Nie używaj środków czyszczących o właściwościach ściernych ani nie zanurzaj urządzenia w wodzie.
8. Rozwiązywanie Problemów
If you encounter issues with your ALLWEI Portable Power Station, please refer to the following common solutions:
- Urządzenie się nie ładuje: Ensure the power station is sufficiently charged and the output port is activated. Check the connection cable for damage.
- Power station not charging: Verify that the charging cable is securely connected to both the power station and the power source. Try a different outlet or charging method.
- Wyświetlacz nie działa: Ensure the power station is turned on. If the issue persists, contact customer support.
For more complex issues or persistent problems, please contact ALLWEI customer service.
9. Specyfikacje
| Funkcja | Szczegół |
|---|---|
| Marka | ALLWEI |
| Nazwa modelu | Przenośna elektrownia |
| Numer modelu przedmiotu | PPS300-4 |
| Cotage | 300 watts (Running), 600 watts (Peak) |
| Pojemność baterii | 256 Wh LiFePO4 |
| Cykle baterii | 3000+ (approx. 10-year lifespan) |
| Porty wyjściowe | 1x AC, 2x DC5521, 1x Car Port, 1x USB-A (18W), 1x USB-C (60W) |
| Objętość wyjścia ACtage | 110 wolty |
| Metody ładowania | AC Wall, 12V Car, Solar Panel, Dual (AC+Solar) |
| Czas ładowania AC | 3.5-4 godzin |
| Czas ładowania słonecznego (100 W) | 4-5 godzin |
| Dual Charging Time (AC+Solar) | 2-2.5 godzin |
| Waga przedmiotu | 6.4 funtów |
| Wymiary produktu | 9.25" dł. x 5" szer. x 6.8" wys. |
| Cechy specjalne | LiFePO4, Pure Sine Wave, MPPT Controller, 3-level LED light with SOS mode, BMS Protection |
| Tworzywo | ABS |
| UPC | 732133487990 |
10. Gwarancja i wsparcie
ALLWEI stands behind the quality of its products. Your Portable Power Station is covered by a comprehensive warranty and dedicated customer support.
- Gwarancja: 5-letnia gwarancja.
- Obsługa klienta: 7x24 customer service is available to assist you with any questions or concerns.
- Zwroty: Enjoy a 30-day no-hassle return policy.
Aby uzyskać pomoc, skontaktuj się z nami pod adresem: wsparcie@allweipower.com