RIGDOO HT-10 Trail Camera User Manual

1. Wprowadzenie

The RIGDOO HT-10 Trail Camera is a high-resolution 4K 48MP game camera designed for outdoor wildlife monitoring. It features advanced night vision capabilities, a rapid 0.1-second motion-activated trigger, and a robust IP66 waterproof rating, making it suitable for various environmental conditions. The 130-degree wide-angle lens and 48 pieces of no-glow infrared LEDs ensure comprehensive coverage and discreet operation. This manual provides detailed instructions for setting up, operating, and maintaining your trail camera.

Figure 1: RIGDOO HT-10 Trail Camera and included accessories.

2. Co znajduje się w pudełku

Po otwarciu opakowania należy sprawdzić, czy znajdują się w nim wszystkie elementy:

• RIGDOO HT-10 Trail Camera
• Karta SD 32 GB (wstępnie zainstalowana)
• 4 baterie AA
• Kabel USB-C
• Pasek montażowy
• Uchwyt montażowy

3. Przewodnik konfiguracji

3.1. Instalacja baterii i karty SD

1. Aby uzyskać dostęp do wewnętrznej komory, otwórz boczną blokadę aparatu.
2. Insert the 4 provided AA batteries into the battery slots. The camera supports up to 8 AA batteries for extended operation, but 4 are sufficient for basic functionality.
3. Ensure the 32GB SD card is properly inserted into its designated slot. It is recommended to format the SD card before first use to ensure optimal performance.
4. Close the camera's side latch securely to maintain its waterproof seal.

3.2. Montaż kamery

The camera can be mounted using the included strap or mounting bracket:

• Używanie paska montażowego: Wrap the strap around a tree or pole and secure the camera. Adjust the strap to ensure the camera is stable and level.
• Using the Mounting Bracket: Attach the mounting bracket to a desired surface (e.g., tree, wall) using appropriate hardware. Then, attach the camera to the bracket. The bracket allows for angle adjustments to optimize the camera's field of view.

Figure 2: Camera mounted on a tree, showcasing its weather resistance.

3.3. Pierwsze włączenie i ustawienia

1. Switch the camera to 'TEST' mode to access the menu and configure settings.
2. Navigate through the menu using the control buttons to set your preferred mode (Photo, Video, or Time-Lapse), photo resolution (up to 48MP), video resolution (up to 4K), photo series, and video length.
3. Once settings are configured, switch the camera to 'ON' mode. The red light will flash, indicating the camera is armed and ready to record.

4. Instrukcja obsługi

4.1. Robienie zdjęć i nagrywanie filmów

The HT-10 Trail Camera is motion-activated. Once movement is detected within its 130-degree detection range, it will automatically capture images or videos based on your configured settings.

• Ultraszybka prędkość spustu: The camera boasts a rapid 0.1-second trigger speed, ensuring that fast-moving wildlife is captured effectively.
• Wysoka rozdzielczość: Capture stunning 48MP photos and 4K videos for clear and detailed observations.

Figure 3: Capturing wildlife with the 0.1s trigger speed.

4.2. Możliwości widzenia w nocy

Equipped with 48 pieces of no-glow infrared LEDs, the camera provides clear night vision up to 100 feet without disturbing wildlife. This feature allows for continuous monitoring in low-light or nighttime conditions.

Figure 4: Night vision in action, capturing a deer.

4.3. Wide-Angle Vision

The 130-degree wide-angle lens captures a broader field of view, allowing you to monitor larger areas and capture more details of the environment and wildlife.

Rysunek 5: Szerokokątny view capturing elephants.

5. Konserwacja

5.1. Konstrukcja odporna na warunki atmosferyczne

The RIGDOO HT-10 Trail Camera features an IP66 waterproof rating, ensuring its durability against ice, snow, rain, and dust. It is designed to withstand challenging outdoor environments.

5.2. Czyszczenie i pielęgnacja

• Regularly check the camera lens and PIR sensors for dirt, dust, or debris. Clean gently with a soft, dry cloth.
• Ensure all latches and covers are securely closed to maintain the waterproof integrity of the camera.
• Jeśli urządzenie nie będzie używane przez dłuższy czas, należy wyjąć baterie, aby zapobiec ich wyciekowi.

5.3. Zarządzanie kartą SD

Okresowo ponownieview and back up the data on your SD card. Format the SD card regularly to prevent data corruption and ensure smooth operation. The camera supports up to 256GB SD cards.

6. Rozwiązywanie Problemów

6.1. Important Warning Tips (from product information)

• The battery should be 1.5V alkaline batteries. Using a DC external power supply is advised to avoid damaging the camera.
• Please use the same type of batteries.
• Remove the protective film from the lens, PIR, and screen before use.
• Please format the SD card and reset the settings for initial use.
• TEST MODE is usually used to set up the camera and perform some functions (LCD screen is bright). Instead, you can do the shoot automatically by pressing 'SHOT'.
• ON MODE: The camera will flash red light and count down when you switch to this mode. It means the camera is working. The screen will turn off the red light and screen goes dark. It indicates that the camera has started working.

7. Specyfikacje

8. Gwarancja i wsparcie

RIGDOO is committed to providing high-quality products and excellent customer service.

• Gwarancja: The RIGDOO HT-10 Trail Camera comes with a 24-month warranty from the date of purchase.
• Hassle-Free Replacement/Return: RIGDOO offers a lifetime hassle-free replacement/return policy. If you encounter any issues, please contact customer service with your order ID and a description of the problem. Resolutions are typically provided within 3 working days.
• Obsługa klienta: Enjoy 7*24H professional customer service for any inquiries or support needs.
• Certyfikacja FCC: This product is FCC certified, ensuring it meets safety and quality standards.