SEQURE 200A Brushless ESC AM32 14200 Pro User Manual

1. Koniec produktuview

The SEQURE 200A Brushless ESC (Electronic Speed Controller) model SQESC 14200 Pro is designed for high-performance applications requiring robust power delivery and precise control. It supports 5-14S Lipo batteries and features a 12V 15A BEC with a 5V fan for efficient cooling. This ESC is compatible with AM32 firmware and various signal protocols.

Główne cechy

• Firmware & Processor: AM32 firmware, STM32G071 processor.
• Pobór mocy: DC 18V-59V (5-14S Lipo).
• Obecna pojemność: 200A continuous current, 350A peak current.
• Adjustable BEC: 6V, 7.4V, 8.4V, 12V with 15A continuous current and 35A peak current. Includes a 5V 0.5A continuous current fan.
• Signal Protocols: Automatic throttle signal detection, supports Dshot (All), PWM, Oneshot, and Multishot.
• Ustawienia zaawansowane: Supports RPM specialized signal, throttle calibration, current detection, motor steering, and telemetry signal settings.
• Zastosowania: Suitable for multi-axis UAVs, fixed-wing drones, crop protection aircraft, helicopters, multi-rotor drones, climbing cars, off-road model vehicles, model ships, and surfboards.

2. Co znajduje się w pudełku

• 1 x Electric Speed Controller
• 1 x wentylator 5V
• 2 x 4*250mm Black Tie Straps
• 10 x Hexagonal Screws
• 4 x Transparent Heat Shrinkable Sleeves

3. Specyfikacje

4. Instalacja i okablowanie

Proper installation and wiring are crucial for the safe and effective operation of your ESC. Always ensure power is disconnected before making any connections.

Schemat okablowania

BEC tomtage Regulacja

The 14200 Pro ESC features a dip switch system to adjust the BEC output voltage. Refer to the diagram below for settings.

Rozpraszanie ciepła

The ESC is equipped with a metal aluminum radiator for effective heat dissipation, ensuring stable operation under high current loads.

Jakość kabla

High-quality twisted pair cables are used to reduce signal interference, ensuring stable and precise transmission.

Installation Hole Position and Dimensions

5. Parameter Configuration and Firmware Upgrade

This section details how to configure parameters and upgrade the firmware using the "Serial Port Connector" program.

Wymagane oprogramowanie

The "Serial Port Connector" program is required for debugging parameters and firmware upgrades. This program can be downloaded from the official SEQURE website. Navigate to the "BLHeliSuite32 & AM32" section and select the AM32 firmware ESC configuration tool for your operating system (Windows/Linux).

Kroki połączenia

1. Power on the single unit electric tuning.
2. Connect the power supply to the ESC.
3. Connect the ESC 3-pin cable to the ECL_Link adapter. Ensure 'S' and 'GND' pins are correctly aligned.
4. Connect the other end of the ECL_Link adapter to your computer via a data cable.

Software Operation for Parameter Adjustment

1. Double-click to open the "Serial Port Connector" program (e.g., "Multi ESC Config Tool 1.82").
2. Check "Direct Connect".
3. Select the corresponding COM port from the dropdown menu.
4. Kliknij „Połącz”, aby nawiązać połączenie.
5. Click "M1" to read the current parameters from the ESC.
6. Modify parameters as required for your application.
7. After making changes, click "Save Settings" to apply them to the ESC.
8. To confirm the modifications, you can click "M1" again to re-read the parameters.

Software Operation for Firmware Upgrade

1. In the "Serial Port Connector" program, click on the "Flash" tab in the top menu.
2. Click "Load Firmware".
3. Wybierz odpowiednie oprogramowanie układowe file (e.g., "AM32_SEQURE_4IN1_0071_2.16.hex").
4. Click "Flash Firmware" and wait for the upgrade process to complete.

Disconnection Steps

1. After completing parameter modification or firmware upgrade, click "Close Connection" in the software.
2. Disconnect the power supply from the ESC.
3. Disconnect the ECL_Link adapter from your computer.

Instructional Video: Parameter Configuration and Firmware Upgrade

This video demonstrates the process of connecting the SEQURE ESC to a computer, configuring parameters, and performing a firmware upgrade using the "Serial Port Connector" tool. It covers power-on, cable connections, software navigation, reading/writing parameters, and flashing new firmware.

6. Instrukcja obsługi

Once configured, the ESC is ready for operation. Ensure all connections are secure before powering on your device.

• Connect the ESC to your flight controller or receiver according to your system's wiring diagram.
• Ensure the motor is securely attached and free to rotate.
• Power on your system. The ESC will typically emit a series of beeps indicating initialization.
• Calibrate the throttle range if necessary, following your flight controller's instructions.
• Always perform initial tests at a low throttle in a safe environment.

7. Konserwacja

Regular maintenance helps ensure the longevity and optimal performance of your ESC.

• Regularly inspect all wiring for damage or loose connections.
• Keep the ESC clean and free from dust, dirt, and moisture.
• Ensure adequate airflow around the ESC to prevent overheating, especially during demanding operations.
• Check for any signs of physical damage to the heatsink or components.
• Periodically check for firmware updates on the SEQURE official webwitrynę, aby zapewnić optymalną wydajność i dostęp do nowych funkcji.

8. Rozwiązywanie Problemów

Typowe problemy i rozwiązania

• ESC not powering on: Sprawdź połączenie akumulatora i głośnośćtage. Ensure the power supply is adequate.
• Silnik nie obraca się lub zachowuje się nieregularnie: Verify motor connections (A, B, C phases). Check signal cable connection to the flight controller/receiver. Ensure throttle range is calibrated. Re-check ESC parameters for correct motor type and settings.
• Przegrzanie: Ensure proper ventilation and airflow. Reduce load if consistently overheating. Check for short circuits in motor windings.
• ESC not connecting to software: Confirm ECL_Link adapter is correctly connected to both ESC and computer. Ensure correct COM port is selected in the software. Reinstall USB drivers if necessary.
• Błąd aktualizacji oprogramowania układowego: Ensure a stable connection during the upgrade process. Download the correct firmware file for your ESC model.

9. Gwarancja i wsparcie

For warranty information, technical support, or further assistance, please visit the official SEQURE weblub skontaktuj się z działem obsługi klienta. Zachowaj paragon zakupu na potrzeby roszczeń gwarancyjnych.

Urzędnik Webstrona: sequremall.com

E-mail: info@sequremall.com