VIOFO CPL-600

VIOFO CPL-600 Circular Polarizing Lens Filter Instruction Manual

Model: CPL-600

1. Koniec produktuview

The VIOFO CPL-600 filter is a circular polarizing lens designed to enhance the video quality of compatible VIOFO dash cameras, specifically the A329S Rear Camera and A229 Ultra Rear Camera. It effectively reduces reflections and glare from surfaces such as glass, water, and vehicle dashboards, while also intensifying colors and contrast for clearer footage.

This filter also provides an additional layer of protection for your camera's lens against fingerprints, scratches, dirt, and wear, thanks to its multi-resistant coating.

VIOFO CPL-600 circular polarizer filter for best video quality in bright daylight.

Image 1.1: The VIOFO CPL-600 filter designed for optimal video quality in bright daylight.

2. Zgodność

The CPL-600 filter is exclusively compatible with the following VIOFO camera models:

  • VIOFO A329S Rear Camera
  • VIOFO A229 Ultra Rear Camera
  • VIOFO A329T Telephoto Camera Lens (likely compatible due to similar lens setup)

Note: This CPL filter is not suitable for the interior camera of the A329S or similar models, as the lens design prevents a proper fit.

CPL-600 filter compatible with A329S rear camera and A329T telephoto camera lens

Image 2.1: Compatibility details for the CPL-600 filter.

3. Instalacja

Follow these steps to properly install the CPL-600 filter on your compatible VIOFO dash camera lens:

  1. Wyczyść obiektyw: Gently wipe the dash camera lens to ensure it is free of dust, smudges, or fingerprints.
  2. Usuń folię ochronną: Carefully peel off any protective film from both sides of the CPL filter.
  3. Załóż filtr: Align the CPL filter with the camera lens and gently press it into place. The filter is designed to fit snugly over the lens.
Easy install and remove: wipe lens, peel protective film, and put the CPL on the lens.

Image 3.1: Visual guide for installing the CPL filter.

Film demonstracyjny instalacji

Video 3.1: This video demonstrates the unboxing and installation process of the CPL filter on a VIOFO rear camera, and also shows its incompatibility with the interior camera.

4. Obsługa filtra CPL

The CPL filter works by filtering out polarized light, which is often the cause of glare and reflections. By rotating the filter, you can adjust the level of polarization to achieve the desired effect. This allows for clearer video capture, especially in bright conditions or when reflections are prominent.

The filter is effective for both daytime and nighttime recording, adapting to various lighting conditions to improve image clarity and color saturation.

Dash cam video comparison shows how a CPL filter reduces windshield reflections and enhances color.

Image 4.1: Comparison showing video quality with and without the CPL filter, highlighting glare reduction and enhanced colors.

Diagram illustrating how the CPL filter works to reduce reflections.

Image 4.2: Diagram illustrating how the CPL filter works to reduce reflections.

5. Konserwacja

The CPL-600 filter features a multi-resistant coating that provides protection against water, scratches, oil, and static. To maintain optimal performance and clarity:

  • Czyszczenie: Use a soft, lint-free cloth to gently wipe the filter surface. For stubborn smudges, a small amount of lens cleaning solution can be applied to the cloth, not directly to the filter.
  • Obsługiwanie: Avoid touching the filter surface directly with your fingers to prevent fingerprints and oils.
  • Składowanie: When not in use, store the filter in its original packaging or a protective case to prevent scratches and dust accumulation.
VIOFO CPL: Multi-resistant coating (water, scratch, oil, & anti-static) for lens protection.

Image 5.1: The multi-resistant coating on the VIOFO CPL filter.

6. Rozwiązywanie Problemów

  • Blurry Image After Installation: Check if any protective film remains on either side of the CPL filter. Some users have reported a protective film on the inside of the lens causing blurriness. Remove all protective films before use.
  • Filtr nie pasuje: Ensure you are attempting to install the CPL-600 filter on a compatible rear or telephoto camera lens (A329S Rear Camera, A229 Ultra Rear Camera, A329T Telephoto Camera). This filter is not designed for the interior camera due to lens size differences.
  • Niewystarczająca redukcja olśnienia: Obróć filtr CPL, obserwując transmisję na żywo view lub nagrane footage to find the optimal angle for glare reduction. The effect of polarization varies with the angle of the filter relative to the light source.

7. Specyfikacje

FunkcjaSzczegół
Nazwa modeluCPL-600
MarkaVIOFO
TworzywoPlastikowy
Rozmiar gwintu filtra fotograficznego38.5 milimetrów
Opis powłokiWielowarstwowa powłoka
Typ efektu filtra fotograficznegoEnhancing (Polarizing)
Poziom wodoodpornościWodoodporny
Wymiary produktu (dł. x szer. x wys.)36.5mm x 25.5mm x 6.5mm (1.46"L x 0.98"W)
Waga przedmiotu2.38 gram
Kompatybilne urządzeniaVIOFO A329S Rear Camera, A229 Ultra Rear Camera, A329T Telephoto Camera
Packing list for CPL-600: product dimensions 36.5mm x 25.5mm x 6.5mm.

Image 7.1: Packaging and dimensions of the CPL-600 filter.

8. Gwarancja i wsparcie

The VIOFO CPL-600 filter comes with a comprehensive 18-miesięczna gwarancja to ensure your satisfaction. VIOFO also offers dedicated customer support.

  • Okres gwarancji: 18 miesiące
  • Zasady zwrotu: 30-dniowa gwarancja zwrotu pieniędzy.
  • Obsługa klienta: 24/7 dedicated support.
  • Adres e-mail kontaktowy: wsparcie@viofo.com
  • Wsparcie telefoniczne w USA: +1 323 505 9898

© 2026 VIOFO. Wszelkie prawa zastrzeżone.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.