Polibi King Size Upholstered Platform Bed

Polibi King Size Upholstered Platform Bed Instruction Manual

Model: King Size Upholstered Platform Bed (Black)

Wstęp

Thank you for choosing the Polibi King Size Upholstered Platform Bed. This manual provides detailed instructions for the safe assembly, proper use, and maintenance of your new bed frame. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

Informacje dotyczące bezpieczeństwa

  • Przed montażem upewnij się, że wszystkie części są kompletne i nieuszkodzone. Nie używaj, jeśli którejkolwiek części brakuje lub jest uszkodzona.
  • Assemble the bed on a soft, clean surface (e.g., carpet) to prevent scratching.
  • Always use two or more people for assembly to prevent injury.
  • Tighten all bolts and screws securely, but do not overtighten. Recheck tightness periodically.
  • Do not allow children to climb on the bed frame during or after assembly.
  • The bed frame is designed to support a maximum weight of 1000 pounds. Do not exceed this limit.

Zawartość opakowania

Your Polibi King Size Upholstered Platform Bed will arrive in two separate boxes. Please verify that all components listed below are present before proceeding with assembly.

Diagram showing all bed frame components and hardware

Rysunek 1: All components included in the Polibi King Size Upholstered Platform Bed package.

Included components typically consist of:

  • Oversized Padded Headboard
  • Szyny boczne (lewa i prawa)
  • Podnóżek
  • Belka podporowa środkowa
  • Solid Pine Wood Slats (20 pieces, 10cm wide)
  • Nogi podporowe (do ramy i belki środkowej)
  • Hardware Pack (bolts, washers, nuts, Allen wrench, hammer)

A power drill (not included) is recommended for quicker assembly.

Instrukcja montażu

Follow these steps to assemble your Polibi King Size Upholstered Platform Bed. It is recommended to have at least two people for assembly.

Krok 1: Złóż ramę główną

  1. Unpack all components and lay them out on a soft, clean surface. Identify the headboard, footboard, and side rails.
  2. Attach the side rails to the headboard and footboard using the provided bolts and washers. Ensure all connections are secure.
Image showing the bed frame structure being assembled

Rysunek 2: Assembling the main bed frame by connecting side rails to the headboard and footboard.

Krok 2: Zamontuj podporę środkową i nogi

  1. Przymocuj środkową belkę nośną w wyznaczonych punktach na wezgłowiu i podnóżku łóżka.
  2. Screw in the support legs to the main frame and the center support beam. Ensure they are firmly tightened to provide stability.

Krok 3: Umieść listwy łóżka

  1. Lay the solid pine wood slats across the bed frame, ensuring they are evenly spaced. The slats are 10cm wide for enhanced support.
  2. Secure the slats to the side rails using the provided hardware or pre-drilled holes.
Image showing bed frame with slats installed

Rysunek 3: Bed frame with all solid wood slats properly installed, providing a sturdy base for the mattress.

Z góry na dół view of the bed slats, highlighting their width and spacing

Rysunek 4: Z bliska view of the 10cm wide bed slats, designed for even mattress support and silent sleep due to sponge stickers on support points.

Step 4: Adjust Mattress Height (Optional)

This bed frame is designed to accommodate multiple mattress heights (6", 8", 10", 12") by adjusting the installation method of the bed frame components. Refer to the specific instructions provided with your hardware for detailed adjustment steps.

Diagram illustrating four different mattress height settings for the bed frame

Rysunek 5: Adjustable bed frame settings for 6", 8", 10", and 12" mattress heights.

Wytyczne dotyczące użytkowania

Kompatybilność materaca

The Polibi King Size Upholstered Platform Bed is compatible with King size mattresses ranging from 6 to 12 inches in height. The embedded design helps keep your mattress securely in place.

Nośność

The bed frame is constructed with a solid pine wood frame and reinforced slats, providing a robust support system. It has been tested to confidently support up to 1000 pounds.

Diagram highlighting key features including 1000 pound weight capacity, silent sleep design, solid wood slats, and adjustable mattress heights.

Rysunek 6: Key features of the bed frame, including its 1000-pound weight capacity and silent sleep design.

Pielęgnacja i konserwacja

Pielęgnacja tapicerki

The bed is fully upholstered with a premium, waterproof polyester fabric. To maintain its appearance:

  • For general cleaning, gently wipe the fabric with a clean, damp płótno.
  • W przypadku rozlania natychmiast osusz czystą, suchą szmatką. Unikaj pocierania, ponieważ może to spowodować rozlanie się plamy.
  • Nie należy używać silnych środków chemicznych ani ściernych środków czyszczących, gdyż mogą one uszkodzić tkaninę.
  • Regularnie odkurzaj tapicerkę za pomocą końcówki przeznaczonej do tego celu, aby usunąć kurz i zanieczyszczenia.
Close-up image of the black polyester upholstery fabric

Rysunek 7: Close-up of the premium polyester fabric, which is smooth, soft, and waterproof.

Pielęgnacja ramy

  • Okresowo sprawdzaj wszystkie śruby i wkręty, aby upewnić się, że są dobrze dokręcone. Dokręć w razie potrzeby.
  • Avoid dragging the bed frame when moving it; always lift to prevent damage to the legs and frame structure.

Rozwiązywanie problemów

If you encounter any issues with your Polibi King Size Upholstered Platform Bed, please refer to the following common solutions:

  • Piszczące dźwięki: Check all bolts and screws for tightness. Ensure the support legs are firmly in contact with the floor. The bed slats are designed with sponge stickers to minimize noise.
  • Niestabilność: Verify that all connections are secure and that the bed is assembled on a level surface. Ensure all support legs are properly installed and tightened.
  • Brakujące części: Jeżeli w momencie dostawy brakowało jakichkolwiek części, prosimy o natychmiastowy kontakt z obsługą klienta.

For issues not resolved by the above steps, please contact Polibi customer support.

Specyfikacje

Detailed dimension diagram of the King Size Polibi Upholstered Platform Bed

Rysunek 8: Overall dimensions and key measurements of the Polibi King Size Upholstered Platform Bed.

FunkcjaSzczegół
ModelKing Size Upholstered Platform Bed
KolorCzarny
Wymiary całkowite (dł. x szer. x wys.)96.5" x 86.22" x 43.3"
Wysokość zagłówka43.3"
Bed Rail Width4.72"
Materiał ramyLite drewno sosnowe
Materiał tapicerskiWaterproof Polyester Fabric
Slat TypeSolid Pine Wood Slats (10cm wide)
Nośność1000 funtów
Zgodność z wysokością materaca6", 8", 10", 12" (adjustable)
Wymagany montażTak

Informacje o gwarancji

Specific warranty details for your Polibi King Size Upholstered Platform Bed may vary. Please refer to the product listing on the retailer's website or contact Polibi customer support for comprehensive warranty information.

Obsługa klienta

For any questions, assistance with assembly, or to report missing/damaged parts, please contact Polibi customer support through the retailer where the product was purchased. You can typically find contact information on the seller's page or your order details.

Sprzedający: polibi

© 2026 Polibi. Wszelkie prawa zastrzeżone.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.