STARTRC Mavic 4 Pro
STARTRC Landing Gear for DJI Mavic 4 Pro Drone - Instruction Manual
Model: Mavic 4 Pro Landing Gear (KYF-12020018)
1. Wprowadzenie
This manual provides instructions for the installation, operation, and maintenance of the STARTRC Foldable Extended Quick Release Landing Gear designed specifically for the DJI Mavic 4 Pro drone. This accessory enhances drone protection by increasing ground clearance.
2. Główne cechy
- Ekskluzywny projekt: Tailored for DJI Mavic 4 Pro, ensuring no obstruction to indicator lights, cooling vents, or vision systems.
- Niezawodna ochrona: Increases ground clearance by 30mm, reducing impact during landing and protecting the drone's fuselage, gimbal, and propellers from debris.
- Wysokiej jakości materiał: Constructed from sturdy and durable plastic, weighing only 40.5g to avoid affecting flight performance.
- Foldable & Quick Release: Easy to install and remove, allowing for quick battery replacement without disassembly. Compact for storage and transport.
Image: DJI Mavic 4 Pro drone with STARTRC landing gear installed, demonstrating the increased ground clearance.
3. Konfiguracja i instalacja
Follow these steps to correctly install the STARTRC Landing Gear on your DJI Mavic 4 Pro drone.
- Open the Drone Arms: Ensure your DJI Mavic 4 Pro drone's arms are unfolded before installation.
- Align the Landing Gear: Position the landing gear with the STARTRC logo facing the front of the drone. Hook the front clasp of the landing gear onto the drone's underside.
- Secure the Rear: Press down on the rear end of the landing gear until you hear a "click," indicating it is securely installed.
- Rozłóż, aby użyć: Unfold the landing gear legs for flight.
Important Note: After installation, the drone's arms cannot be folded back. This means the drone cannot be placed into a waterproof case or other compact storage without removing the rear kickstand. The drone itself is not included with this product.
Image: Visual guide for installing the landing gear, showing the drone with unfolded arms, aligning the gear, and pressing to secure.
Video: Demonstration of the quick installation and removal process for the STARTRC Landing Gear on a DJI Mavic 4 Pro drone.
4. Instrukcja obsługi
Once the landing gear is securely installed, operate your DJI Mavic 4 Pro drone as usual. The landing gear provides additional clearance and stability.
- Startować: The increased height helps prevent propellers from striking the ground or debris during takeoff, especially on uneven surfaces.
- Lądowanie: The extended legs absorb impact, ensuring a smoother landing and protecting the drone's sensitive components.
- Prześwit: The 30mm elevation keeps the drone's body, gimbal, and camera further from dirt, dust, and moisture on the ground.
Image: Drone with landing gear positioned on uneven ground, illustrating the protective benefits.
5. Konserwacja
To ensure the longevity and optimal performance of your STARTRC Landing Gear, follow these simple maintenance guidelines:
- Czyszczenie: Wipe the landing gear with a soft, damp cloth after use to remove any dirt or debris. Avoid harsh chemicals.
- Kontrola: Regularly check for any signs of wear, cracks, or damage, especially after hard landings.
- Składowanie: When not in use, fold the landing gear and store it in a cool, dry place away from direct sunlight.
6. Rozwiązywanie Problemów
| Problem | Możliwa przyczyna | Rozwiązanie |
|---|---|---|
| Landing gear feels loose after installation. | Not fully clicked into place. | Ensure both front clasps are hooked and the rear is pressed until a "click" is heard. Re-install if necessary. |
| Drone's sensors or lights are obstructed. | Nieprawidłowe wyrównanie podczas instalacji. | Verify the landing gear is aligned with the drone's underside, ensuring cutouts match sensor and light positions. |
| Difficulty folding drone arms with landing gear attached. | To jest oczekiwane zachowanie. | The landing gear is designed to be removed before folding the drone arms for compact storage. |
7. Specyfikacje
| Funkcja | Szczegół |
|---|---|
| Nazwa modelu | Mavic 4 Pro Landing Gear |
| Numer części | KYF-12020018 |
| Zgodność | DJI Mavic 4 Pro |
| Tworzywo | Durable Plastic (ABS+PC) |
| Waga | Około 40.5g |
| Increased Ground Clearance | 30 mm (1.18 cali) |
| Wymiary (rozłożony) | 165.85 mm (dł.) x 123.63 mm (szer.) x 48.5 mm (wys.) |
| Wymiary (złożony) | 168.77 mm (dł.) x 36 mm (wys.) |
Image: Detailed dimensions of the landing gear in both unfolded and folded states.
8. Gwarancja i wsparcie
For warranty information or technical support, please refer to the official STARTRC webOdwiedź witrynę lub skontaktuj się ze sprzedawcą. Zachowaj paragon zakupu na wypadek reklamacji.
Producent: STARTRC
Sprzedający: GreenKYF (via Amazon)
Zasady zwrotu: 30-day refund/replacement policy (as per Amazon's Buy Box Winner information).