DIYTECH 3.5mm Audio Wall Plate Instruction Manual

1. Koniec produktuview

The DIYTECH 3.5mm Audio Wall Plate provides a clean and integrated solution for connecting audio devices such as headphones, AUX cords, stereo systems, and speakers. This single-gang faceplate includes a mounting bracket for easy installation in drywall, eliminating the need for an existing electrical box. Its design allows for routing audio cables through walls, maintaining a tidy appearance. The gold-plated 3.5mm connector ensures optimal audio signal transfer and durability.

Główne cechy:

• Universal 3.5mm Audio Port: Compatible with standard 3.5mm audio cables for various devices.
• Zintegrowany uchwyt montażowy: Includes a 1-gang low voltage mounting bracket for secure drywall installation.
• Clean Cable Management: Enables in-wall cable routing for a professional and clutter-free setup.
• Extension Cable Design: Features a built-in extension cable for easier connection in confined spaces.
• Trwała konstrukcja: Gold-plated connector and robust white faceplate for long-term performance and aesthetic integration.

2. Zawartość opakowania

• 1 x DIYTECH 3.5mm Audio Wall Plate (White)
• 1 x Single Gang Low Voltage Wspornik montażowy

Image: The DIYTECH 3.5mm Audio Wall Plate shown with its included single gang mounting bracket. The wall plate is white with a silver 3.5mm jack, and a black cable extends from the back, terminating in a female 3.5mm connector. The black mounting bracket is visible behind the plate.

3. Informacje dotyczące bezpieczeństwa

• Always disconnect power to the area before cutting into walls or performing any electrical work, even for low-voltage instalacje.
• Use appropriate tools for cutting drywall to avoid injury or damage to existing wiring.
• Ensure no electrical wires or plumbing are present behind the intended installation area before cutting.
• Ten produkt jest przeznaczony do małych objętościtage audio signals only. Do not connect to high-voltagobwody elektryczne.
• Przechowywać w miejscu niedostępnym dla dzieci.

4. Konfiguracja i instalacja

This wall plate is designed for easy installation in drywall without the need for a traditional electrical box. Follow these steps for a secure and clean setup.

1. Wybierz lokalizację: Choose a suitable location on your wall, ensuring it is free from studs, electrical wiring, and plumbing.
2. Otwór cięcia: Using the included mounting bracket as a template, carefully mark and cut an opening in the drywall. The opening should be sized to accommodate the bracket.
3. Zainstaluj wspornik montażowy: Insert the single gang low voltage mounting bracket into the cut opening. Tighten the screws on the bracket to engage the tabs, securing it firmly against the drywall.


Image: A hand holding the black 1-gang low voltage mounting bracket, demonstrating how it fits into a rectangular opening cut into a yellow drywall surface. The bracket's adjustable tabs are visible, designed to secure it to the wall.

4. Route Audio Cable: Feed your desired 3.5mm audio extension cable (not included) through the wall from your audio source to the wall plate opening.
5. Connect Wall Plate: Connect the female end of the wall plate's integrated extension cable to your routed 3.5mm audio extension cable.


Obraz: Tył view of the white 3.5mm audio wall plate. A black audio cable is shown plugged into the female connector extending from the back of the wall plate, illustrating the connection point for the in-wall audio cable.

6. Montaż płytki ściennej: Carefully push the wall plate into the mounting bracket, aligning the screw holes. Secure the wall plate to the bracket using the provided screws. Do not overtighten.
7. Połączenie testowe: Once installed, connect an audio device to the front 3.5mm jack and test the audio signal.

5. Instrukcja obsługi

Using the DIYTECH 3.5mm Audio Wall Plate is straightforward:

1. Ensure your audio source (e.g., TV, receiver, computer) is connected to the other end of the in-wall 3.5mm audio cable.
2. Plug your headphones, portable speaker, or other 3.5mm audio device into the 3.5mm jack on the front of the wall plate.
3. Adjust the volume on your audio source or connected device as needed.

6. Konserwacja

• Czyszczenie: Wipe the surface of the wall plate with a soft, dry cloth. Avoid using abrasive cleaners or solvents, which may damage the finish.
• Znajomości: Periodically check that all connections are secure to ensure optimal audio quality.

7. Rozwiązywanie Problemów

8. Specyfikacje

• Model: DIY35PLTEAVD
• Typ złącza: 3.5mm Audio Jack (Female to Female via integrated extension cable)
• Tworzywo: Plastic (Faceplate), Metal (Connector)
• Kolor: Biały
• Konfiguracja: Pojedynczy gang
• Typ instalacji: Snap-On (with included mounting bracket)
• Dimensions (Wall Plate): Approximately 4.5 x 2.75 inches (Standard single gang size)
• Waga przedmiotu: Około 1.9 uncji (0.05 kilograma)
• Cechy szczególne: Gold-plated connector, integrated extension cable

9. Gwarancja i wsparcie

For warranty information or technical support, please refer to the DIYTECH official webOdwiedź stronę internetową lub skontaktuj się bezpośrednio z działem obsługi klienta. Zachowaj paragon zakupu na wypadek reklamacji.

DIYTECH Customer Support: Visit the DIYTECH Store on Amazon