FEELNEEDY FN-W23 3L Cat Drinking Fountain User Manual

1. Wprowadzenie

Thank you for choosing the FEELNEEDY FN-W23 3L Cat Drinking Fountain. This product is designed to provide a continuous supply of fresh, filtered water for your pets, encouraging them to drink more and stay hydrated. Please read this manual carefully before setup and operation to ensure proper use and maintenance.

2. Instrukcje bezpieczeństwa

• Tylko do użytku wewnątrz pomieszczeń.
• Zawsze odłączaj fontannę od zasilania przed czyszczeniem lub konserwacją.
• Do not allow the pump to run dry. Ensure the water level is always above the minimum mark.
• Trzymaj przewód zasilający z dala od zwierząt domowych, które mogą go gryźć.
• Use only a 5V/1A USB power adapter (not included) with this device.
• Do not immerse the USB plug or power adapter in water.
• Przechowywać w miejscu niedostępnym dla dzieci.
• If the power cord is damaged, do not use the fountain. Contact customer support.

3. Zawartość opakowania

Sprawdź, czy w przesyłce znajdują się wszystkie elementy:

• 1 x Pet Drinking Fountain (main body, stainless steel bowl, transparent water tank)
• 1 x Pompa wodna
• 1 x filtr z węglem aktywnym
• 1 x Water Pump Filter Sponge
• 1 x Instrukcja obsługi

Image: All components of the FEELNEEDY FN-W23 Cat Drinking Fountain, including the main body, stainless steel bowl, pump, filter, and manual.

4. Instrukcje konfiguracji

1. Spłucz składniki: Thoroughly rinse the stainless steel drinking bowl, transparent water tank, and pump with clean water before first use.
2. Install Filter Sponge: Place the small filter sponge onto the water pump intake.
3. Place Pump: Position the water pump securely at the bottom of the transparent water tank. Ensure the power cord is routed through the designated groove.
4. Montaż filtra z węglem aktywnym: Place the activated carbon filter into the filter tray, ensuring it sits flat.
5. Assemble Top Tray: Place the filter tray with the activated carbon filter onto the transparent water tank.
6. Dodaj wodę: Fill the transparent water tank with clean water up to the 'MAX' line. Do not overfill. The fountain has a 3L capacity.
7. Umieść miskę ze stali nierdzewnej: Position the stainless steel drinking bowl on top of the assembled unit.
8. Podłącz zasilanie: Connect the USB cable to a 5V/1A USB power adapter (not included) and plug it into a power outlet.

Image: Disassembled components of the fountain, showing the main body, stainless steel bowl, and filter parts.

Image: The transparent water tank with a visible water level, indicating the 3L capacity.

5. Instrukcja obsługi

Once assembled and plugged in, the fountain will begin to circulate water. The design ensures a continuous flow, enticing pets to drink.

• Poziom wody: Regularly check the water level through the transparent tank. Refill when the water level is low to prevent the pump from running dry. The 3L capacity provides sufficient water for extended periods.
• Emergency Water Backup: The spacious stainless steel tray holds approximately 300ml of water, providing an emergency backup in case of power failure or pump malfunction.
• Cicha praca: The fountain is designed for quiet operation, typically below 25dB, to avoid disturbing your pets or household.
• Filtrowanie: The multi-layer filtration system, including the activated carbon filter and pump filter sponge, helps remove impurities, odors, and hair from the water, providing fresh water for your pet.

Image: A cat drinking from the assembled FEELNEEDY FN-W23 Cat Drinking Fountain, demonstrating its use.

Image: An illustration highlighting the whisper-quiet operation of the FEELNEEDY fountain, showing a sleeping cat nearby.

Image: A cutaway diagram illustrating the multi-layer filtration system of the fountain, showing different filter components.

6. Konserwacja

Regular cleaning and filter replacement are crucial for the longevity of the fountain and the health of your pet.

6.1 Codzienna konserwacja

• Check the water level and refill as needed.
• Remove any visible debris or pet hair from the stainless steel bowl.

6.2 Cotygodniowe czyszczenie

1. Wyjąć wtyczkę: Odłącz zasilacz od gniazdka.
2. Demontować: Remove the stainless steel bowl, filter tray, and water pump.
3. Czyste komponenty: Wash all parts (stainless steel bowl, transparent water tank, filter tray) with mild soap and water. Rinse thoroughly to remove all soap residue.
4. Wyczyść pompę: Disassemble the pump and clean any hair or debris from the impeller and pump housing. Use a small brush if necessary.
5. Przepłucz filtry: Rinse the activated carbon filter and pump filter sponge under running water. Note: The activated carbon filter should be replaced every 2-4 weeks, or more frequently if multiple pets use the fountain.
6. Ponowny montaż: Reassemble all components and refill with fresh water.

Image: A hand rinsing the stainless steel drinking bowl under a faucet, demonstrating the ease of cleaning.

6.3 Wymiana filtra

Replace the activated carbon filter every 2 to 4 weeks. Replace the pump filter sponge every 1-2 months, or when it appears heavily soiled.

7. Rozwiązywanie Problemów

8. Specyfikacje

• Model: FN-W23
• Marka: CZUJĘ SIĘ POTRZEBNY
• Pojemność: 3 litrów
• Tworzywo: Polypropylene (PP) water tank, 304 Stainless Steel drinking bowl
• Kolor: Czarny
• Wymiary produktu: 22.8L x 22.8W x 12.4H centymetrów
• Waga przedmiotu: 0.72 kilograma
• Źródło zasilania: Elektryczny przewodowy (USB)
• Tomtage: 5 V (prąd stały)
• Recommended Power Adapter: 5V/1A USB (not included)
• Typ zwierzaka: Cat & Small Dog
• Zastosowanie wewnątrz/na zewnątrz: Tylko wewnątrz
• Dodatek specjalny: Stainless steel drinking bowl, quiet operation, multi-layer filtration, transparent water tank

9. Gwarancja i wsparcie

FEELNEEDY products are manufactured with quality and care. For warranty information or technical support, please refer to the contact details provided on your purchase receipt or visit the official FEELNEEDY webStrona. Zachowaj dowód zakupu na wypadek roszczeń gwarancyjnych.

For assistance, please contact FEELNEEDY customer service.