MEETION BTC9770

MEETION Wireless Bluetooth Keyboard and Mouse User Manual

Model: BTC9770

1. Wprowadzenie

Thank you for choosing the MEETION Wireless Bluetooth Keyboard and Mouse combo. This ultra-slim, multi-device peripheral set is designed for seamless connectivity across various operating systems, including Windows and Mac. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance and a comfortable user experience.

MEETION Wireless Bluetooth Keyboard and Mouse Combo

Figure 1: MEETION Wireless Bluetooth Keyboard and Mouse Combo

2. Zawartość opakowania

  • 1 x MEETION Wireless Keyboard
  • 1 x MEETION Wireless Mouse
  • 1 x 2.4G USB Receiver (stored in mouse battery compartment)
  • 1 x Instrukcja obsługi

3. Przewodnik konfiguracji

3.1 Instalacja baterii

The keyboard requires two (2) AAA batteries, and the mouse requires one (1) AA battery. Batteries are not included and must be purchased separately.

  1. Znajdź komory baterii na spodzie klawiatury i myszy.
  2. Otwórz pokrywy baterii.
  3. Włóż baterie, zwracając uwagę na prawidłową polaryzację (+/-).
  4. Zamknij dokładnie pokrywy baterii.
Schemat instalacji akumulatora

Figure 2: Battery installation for keyboard and mouse.

3.2 Powering On and System Switching

After installing batteries, locate the power switch on the back of the keyboard and the bottom of the mouse. Slide the switches to the ON position.

To optimize compatibility, switch the keyboard to the correct operating system mode:

  • Dla Okna system: Press Fn + N
  • Dla Prochowiec system: Press fn+m
Preparation Steps: Battery, Power, System Switch

Figure 3: Steps for battery installation, powering on, and system mode selection.

3.3 Łączenie się za pomocą trybu bezprzewodowego 2.4G

The 2.4G wireless mode uses a USB receiver for connection.

  1. Remove the 2.4G USB receiver from its storage compartment on the bottom of the mouse.
  2. Podłącz odbiornik USB do wolnego portu USB w komputerze.
  3. Na klawiaturze naciśnij 2.4G button (often indicated by a Wi-Fi symbol). The 2.4G indicator light will illuminate.
  4. On the mouse, click the Mode Switching Button (usually on the bottom) until the 2.4G indicator light turns green.
  5. The keyboard and mouse should now be connected to your device.
2.4G Mode Connection Instructions

Figure 4: Visual guide for 2.4G wireless connection.

3.4 Connecting via Bluetooth Mode (BT1/BT2)

The combo supports two independent Bluetooth connections (BT1 and BT2), allowing you to switch between up to three devices (one 2.4G, two Bluetooth).

  1. Na klawiaturze naciśnij BT1 or BT2 key. The corresponding Bluetooth indicator light will turn blue and begin to blink, indicating it's in pairing mode.
  2. On your computer or device, open Bluetooth settings and search for new devices. You should see