1. Wprowadzenie
The Aune SC1 EVO is a high-precision 10MHz external audio clock designed to enhance the performance of compatible audio devices. It features a custom SC-cut OCXO (Oven Controlled Crystal Oscillator) and provides both sine wave and square wave outputs. This manual provides essential information for the proper setup, operation, and maintenance of your SC1 EVO.
2. Koniec produktuview
2.1 Panel przedni
Opis obrazu: The front panel of the Aune SC1 EVO Audio Clock, showing the display screen, a multifunctional button, and an indicator light. The display shows 'aune SC1 Audio Clock' and 'EVO' branding.
- Ekran wyświetlacza: Shows operational status, temperature, and frequency.
- Przycisk wielofunkcyjny: Used for various controls and settings.
- Kontrolka: Zapewnia wizualną informację zwrotną o stanie urządzenia.
2.2 Panel tylny
Opis obrazu: The rear panel of the Aune SC1 EVO Audio Clock, detailing the input and output ports. These include 10MHz sine wave outputs, 10MHz square wave outputs, a DC power input, an AC input, and a power switch.
- 10MHz Sine Wave Output: Two outputs for connecting to compatible audio devices.
- 10MHz Square Wave Output: Two outputs for connecting to compatible audio devices.
- Wejście zasilania prądem stałym (12 V): For external DC power supply.
- AC Input (100-240V AC): For standard AC power connection.
- Przycisk zasilania: Aby włączyć lub wyłączyć urządzenie.
2.3 Główne cechy
- Custom SC-cut OCXO: A high-quality, custom-designed Oven Controlled Crystal Oscillator for precise clock signals.
- Dual Waveform Outputs: Provides two sine wave and two square wave 10MHz outputs simultaneously.
- Niezależne zasilanie: Features a low-noise, high-current LDO exclusively for the OCXO, with dedicated shielding for isolation.
- Synchronized Isolated Output: All four outputs maintain phase synchronization of less than 0.00001° while being isolated.
- Wide Frequency Domain & Low Jitter: Jitter is below 200 fs (BW 1 Hz ~ 1 MHz), ensuring precise reference clock signals.
- AC+DC Dual Input: Supports worldwide 110-230V AC and 12V DC input, with DC priority.
- Vivid UI: Full-color display monitoring core chamber temperature in real-time (red for warm-up, yellow for operational, green for optimal).
- Cascade Symmetric Low-Noise Power Design: Stage-by-stage tomtage regulation for optimal power delivery.
3. Instrukcje konfiguracji
3.1 Połączenie zasilania
- Upewnij się, że wyłącznik zasilania na tylnym panelu jest w pozycji WYŁĄCZONY.
- Connect the provided AC power cable to the AC input port (100-240V AC) on the rear panel and then to a suitable power outlet. Alternatively, for DC power, connect a 12V DC power supply to the DC power input port. The device prioritizes DC input if both are connected.
- Flip the power switch to the ON position. The display will illuminate.
3.2 Podłączanie do urządzeń audio
The SC1 EVO provides two 10MHz sine wave outputs and two 10MHz square wave outputs. Use high-quality 75Ω coaxial cables to connect the appropriate output ports on the SC1 EVO to the 10MHz clock input ports on your compatible audio devices (e.g., DACs, streamers, CD players).
- Identify the required clock input type (sine wave or square wave) on your audio device.
- Connect one end of a 75Ω coaxial cable to the corresponding 10MHz output port on the SC1 EVO.
- Connect the other end of the coaxial cable to the 10MHz clock input on your audio device.
- Repeat for additional devices as needed. All four outputs can be used simultaneously.
4. Działanie
4.1 Interfejs wyświetlacza
Opis obrazu: The Aune SC1 EVO's full-color display showing the 10MHz frequency and real-time core chamber temperature. The display changes color (red, yellow, green) to indicate the clock's status from warm-up to optimal operation.
The SC1 EVO features a full-color display that provides real-time information about the clock's status. It monitors the core chamber temperature, indicating:
- Czerwony: Warm-up phase.
- Żółty: Operational, but not yet at peak stability.
- Zielony: Optimal operating temperature and stability achieved.
The display will also show the 10MHz frequency output.
4.2 Output Selection and Usage
The SC1 EVO automatically outputs both sine wave and square wave 10MHz signals simultaneously from their respective ports once powered on. There is no manual selection required for the output type. Ensure your connected audio device is configured to receive the external 10MHz clock signal.
5. Specyfikacje
| Funkcja | Szczegół |
|---|---|
| Nazwa modelu | aune SC1 |
| Typ montażu | Uchwyt na blat |
| Wejście Voltage | 110-240 Volts (AC), 12 Volts (DC) |
| Tryb wyjścia audio | Stereo (for connected devices) |
| Marka | Aune |
| Numer modelu przedmiotu | SC1 |
| Waga przedmiotu | 4.4 funta (ok. 2 kg) |
| Wymiary produktu | 11 x 1.5 x 2.76 cala (ok. 27.9 x 3.8 x 7 cm) |
| Producent | Aune |
| Źródło zasilania | Elektryczny przewodowy |
| Technologia komunikacji bezprzewodowej | Brak technologii komunikacji bezprzewodowej |
| Metoda kontroli | Touch (via multifunctional button) |
| Rodzaj gwarancji | Ograniczony |
6. Konserwacja
6.1 Czyszczenie
- Zawsze odłączaj zasilanie przed czyszczeniem.
- Do czyszczenia zewnętrznej części urządzenia należy używać miękkiej, suchej i niepozostawiającej włókien ściereczki.
- Nie należy używać płynnych środków czyszczących, aerozoli ani rozpuszczalników, gdyż mogą one uszkodzić wykończenie lub wewnętrzne elementy.
6.2 Względy środowiskowe
- Umieść urządzenie na stabilnej, równej powierzchni.
- Avoid exposing the device to direct sunlight, excessive heat, humidity, or dust.
- Aby zapobiec przegrzaniu, należy zapewnić odpowiednią wentylację wokół urządzenia.
7. Rozwiązywanie Problemów
If you encounter issues with your Aune SC1 EVO, please refer to the following common problems and solutions:
- Brak zasilania:
- Sprawdź, czy kabel zasilający jest prawidłowo podłączony do urządzenia i gniazdka elektrycznego.
- Upewnij się, że przełącznik zasilania na tylnym panelu jest w pozycji ON.
- Sprawdź, czy gniazdko elektryczne jest sprawne.
- No Clock Signal Output:
- Confirm that the SC1 EVO is powered on and the display shows an operational status (yellow or green).
- Check the coaxial cable connections between the SC1 EVO and your audio device. Ensure they are secure and the cables are not damaged.
- Verify that your audio device is correctly configured to accept an external 10MHz clock signal and is connected to the appropriate input type (sine or square wave).
- Problemy z wyświetlaniem:
- If the display is dim or flickering, try restarting the device.
- If the display shows an unexpected color (e.g., red for an extended period after warm-up), ensure the device has adequate ventilation and is not in an excessively hot environment.
If the problem persists after attempting these solutions, please contact Aune customer support for further assistance.
8. Gwarancja i wsparcie
The Aune SC1 EVO comes with a Limited Warranty. Please refer to the warranty card included with your product for specific terms and conditions, including coverage duration and service procedures.
For technical support, service, or warranty inquiries, please contact Aune customer service through their official website or the retailer where you purchased the product. You can visit the Aune Store for more information: Aune Official Store.
