FLEXISPOT XRC6 Nursery Swivel Rocker Recliner Instruction Manual

Wstęp

Thank you for choosing the FLEXISPOT XRC6 Nursery Swivel Rocker Recliner. This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your recliner. Please read all instructions carefully before use and retain this manual for future reference.

Image: The FLEXISPOT XRC6 recliner, highlighting its massage function.

Ważne informacje dotyczące bezpieczeństwa

To reduce the risk of injury, please observe the following safety precautions:

• Przed użyciem upewnij się, że wszystkie części są dobrze zamocowane.
• Trzymaj dzieci i zwierzęta domowe z dala od ruchomych części fotela.
• Do not stand on the recliner or use it as a step stool.
• Avoid placing heavy objects on the footrest when extended.
• Unplug the power cord before cleaning or if the recliner will be unused for an extended period.
• Maksymalny udźwig: 300 funtów.

Przewodnik po konfiguracji

The FLEXISPOT XRC6 recliner is designed for easy assembly. It ships in two compact boxes. Follow these steps for proper installation:

1. Rozpakuj komponenty: Carefully remove all parts from the packaging. Verify that you have the seat, backrest, two armrests, adjustment lever, remote control, adapter, screws, flat washers, nuts, wrench, and hex key.
2. Dołącz podłokietniki: Align the hook-loop brackets on the armrests with the corresponding slots on the seat base. Gently push down until each armrest locks into position.
3. Insert Adjustment Lever: With the chair on its side, insert the angle adjustment lever into its designated slot on the side of the seat base.
4. Bezpieczne śruby: Locate the screw installation area. Insert the provided screws, ensuring correct orientation.
5. Extend Footrest: To access the remaining installation area, extend the footrest using the lever.
6. Fasten with Washers and Nuts: Secure the components using the washers and nuts provided. Ensure all connections are tight.
7. Montaż oparcia: Align the backrest with the seat base. Push down firmly until you hear a "click," indicating proper installation.
8. Podłącz przewody: Locate the power wires for the massage and heat functions. Connect them securely.
9. Zamontuj tylny panel: Attach the velcro on the backrest rear panel to secure it in place, covering the wires.

Image: Product dimensions and shipping information.

Instrukcja obsługi

Reclining and Rocking Functions

• Układać: Pull the manual lever located on the side of the recliner to extend the footrest and recline the backrest. Push back with your body weight to achieve your desired recline angle.
• Powrót do pozycji pionowej: To return to the upright position, gently push the footrest down with your legs and lean forward. The backrest will follow.
• Obracać: The recliner features a 360° swivel base, allowing you to rotate freely.
• Kołysanie: The chair provides a gentle 30° back-and-forth rocking motion for comfort.

Image: Manual swivel, rock, and recline adjustment with pull handle.

Image: Full recline position for relaxation.

Massage and Heat Functions

The recliner includes a remote control for activating and adjusting the massage and heat features.

• Włączanie/wyłączanie: Use the power button on the remote to turn the massage and heat functions on or off.
• Tryby masażu: Select from multiple massage modes (e.g., pulse, press, wave, auto) using the 'Mode' button.
• Poziomy intensywności: Adjust the massage intensity (high, medium, low) with the 'Intensity' buttons.
• Ukierunkowany masaż: Use the 'Part' button to select specific areas for massage, such as the back or lumbar region.
• Funkcja ciepła: Press the 'Heat' button to activate the lumbar heating function. The indicator light will turn red when active.
• Regulator czasowy: Set a timer for your massage session using the 'Time' button.

Image: Remote control for massage and heat functions.

Pielęgnacja i konserwacja

• Pielęgnacja tkanin: The OEKO-TEX certified chenille fabric is spill-resistant. For spills and everyday messes, wipe clean with a damp płótno. Unikaj ostrych środków chemicznych.
• Ogólne sprzątanie: Regularly vacuum the recliner to remove dust and debris.
• Ruchome części: Periodically check all screws and connections to ensure they are tight. Lubricate moving metal parts if necessary, following manufacturer guidelines.
• Przewód zasilający: Sprawdź przewód zasilający pod kątem uszkodzeń. W przypadku uszkodzenia, zaprzestań użytkowania i skontaktuj się z obsługą klienta.

Image: Details of the recliner's chenille fabric and comfort features.

Rozwiązywanie problemów

Jeśli napotkasz jakiekolwiek problemy z fotelem rozkładanym, zapoznaj się z poniższymi typowymi rozwiązaniami:

• Recliner Not Reclining:
  • Ensure the manual lever is fully pulled.
  • Sprawdź, czy nie ma żadnych przeszkód, które mogłyby uniemożliwić ruch podnóżka lub oparcia.
• Masaż/ogrzewanie nie działa:
  • Verify that the power adapter is securely plugged into both the recliner and a working wall outlet.
  • Sprawdź, czy przycisk zasilania na pilocie jest wciśnięty.
  • Ensure all internal wires are properly connected (refer to Setup Guide).
• Niestabilny lub chwiejny:
  • Confirm that all assembly screws and nuts are tightened.
  • Ensure the recliner is placed on a flat, even surface.

If the issue persists, please contact FLEXISPOT customer support.

Specyfikacje

Gwarancja i wsparcie

FLEXISPOT products are manufactured with quality and durability in mind. For specific warranty details, please refer to the warranty card included with your product or visit the official FLEXISPOT webstrona.

For customer support, technical assistance, or to inquire about replacement parts, please contact FLEXISPOT directly or visit their official store:

Visit the FLEXISPOT Store on Amazon