1. Wprowadzenie
Thank you for choosing the LKTOP 100W USB-C Power Adapter. This high-performance charger is designed to provide efficient and safe power delivery for a wide range of DJI drones, remote controllers, and other USB-C compatible devices. Please read this manual carefully before use to ensure optimal performance and safety.
2. Koniec produktuview
The LKTOP 100W USB-C Power Adapter features two USB-C output ports supporting PPS and PD protocols for fast charging. It delivers a continuous 100W output, enabling simultaneous charging of your DJI intelligent flight battery and remote controller. Built-in safety features protect your devices from over-voltage i przetężenie.

Obraz 2.1: The LKTOP 100W USB-C Power Adapter, a compact black charging brick with two USB-C ports, shown next to various DJI drones and accessories, highlighting its compatibility and power output.
3. Zgodność
This charger is widely compatible with numerous DJI products and other USB-C devices:
- DJI Drones: Mini 4 Pro, Mini 3, Mini 3 Pro, Mini 4K, Mini 2 SE, Mini 2, Mini SE, Mavic Mini, Air 3, Air 3S, Mavic 3 Pro, Mavic 3 Cine, Mavic 3 Classic, Mavic 3, Mavic 3 Enterprise Series, Mavic 4 Pro, Avata/Avata 2, Neo, Flip.
- DJI Charging Hubs: DJI/LKTOP Mini 4/3 Series Charging Hub, DJI/LKTOP Air 3 Series Charging Hub, DJI Mavic 3 Series Charging Hub, DJI Mavic 4 Pro Parallel Charging Hub.
- DJI Controllers & Accessories: DJI Remote Controller, DJI Goggles 2 Battery.
- Inne urządzenia: Any device with a USB-C port that supports PD (Power Delivery) or PPS (Programmable Power Supply) protocols.

Obraz 3.1: The LKTOP 100W USB-C Power Adapter connected to a DJI Mini 4 Pro drone, illustrating its direct charging capability for Mini series drones.

Obraz 3.2: The LKTOP 100W USB-C Power Adapter connected to a DJI Air 3 drone, demonstrating its compatibility with the Air series.

Obraz 3.3: The LKTOP 100W USB-C Power Adapter connected to a DJI Mavic 3 series drone, showcasing its use with Mavic series drones.

Obraz 3.4: The LKTOP 100W USB-C Power Adapter connected to a DJI Neo drone, indicating its compatibility with the DJI Neo.

Obraz 3.5: The LKTOP 100W USB-C Power Adapter connected to various DJI Avata series devices, including the drone and charging hubs, demonstrating broad compatibility.

Obraz 3.6: The LKTOP 100W USB-C Power Adapter connected to various DJI Remote Controllers (RC-N1, RC-N2/N3, RC, RC 2, RC Pro, RC Pro Plus), showing its ability to charge different controller models.
4. Konfiguracja
- Podłącz do gniazdka elektrycznego: Plug the LKTOP 100W USB-C Power Adapter into a standard AC power outlet using the provided AC power cord.
- Podłącz kabel ładujący: Insert one end of the USB-C charging cable (provided or compatible) into one of the USB-C output ports on the adapter.
- Połącz z urządzeniem: Connect the other end of the USB-C charging cable to your DJI drone, remote controller, charging hub, or other USB-C compatible device.
- Sprawdź połączenie: Ensure all connections are secure. The device should indicate that it is charging.
Wideo 4.1: A demonstration of unboxing and connecting the LKTOP 100W USB-C Power Adapter to a power strip and then to a DJI Mini series charging hub, showing the charging process.
5. Instrukcja obsługi
5.1. Szybkie ładowanie
The charger supports fast charging for USB-C devices using PPS and PD protocols. Charging times for DJI intelligent flight batteries are approximately 64-80 minutes, depending on the model and battery state.
5.2. Ładowanie jednoczesne
With its powerful 100W output, the adapter can charge both your DJI intelligent flight battery and DJI remote controller concurrently. This saves time and ensures your equipment is ready for use.

Obraz 5.1: The LKTOP 100W USB-C Power Adapter simultaneously charging a DJI charging hub with batteries and a DJI remote controller, demonstrating its multi-device charging capability.
5.3. Intelligent Power Allocation
The charger features intelligent power allocation. When only one port is in use, it can deliver up to 100W. When both USB-C ports are used simultaneously, the power is dynamically allocated based on the load, with a single port maximum of 82W and a total maximum output of 100W.

Obraz 5.2: A diagram illustrating the intelligent power allocation of the LKTOP 100W USB-C Power Adapter, showing 100W max for single-port charging and dynamic allocation for two-port charging (82W max per port, 100W total).
6. Konserwacja
- Utrzymuj ładowarkę w czystości i suchości. Unikaj narażenia na wilgoć i ekstremalne temperatury.
- Do not attempt to disassemble or repair the charger. Contact customer support if issues arise.
- Jeśli nie używasz ładowarki, przechowuj ją w chłodnym i suchym miejscu.
- Use only approved charging cables to prevent damage to the charger and your devices.
7. Rozwiązywanie Problemów
7.1. Urządzenie się nie ładuje
- Sprawdź, czy ładowarka jest prawidłowo podłączona do działającego gniazdka elektrycznego.
- Check that the USB-C cable is firmly connected to both the charger and the device.
- Try using a different USB-C cable or a different power outlet.
- Verify that your device is compatible with USB-C PD/PPS charging.
7.2. Powolne ładowanie
- Ensure you are using a high-quality USB-C cable capable of supporting 100W power delivery.
- If multiple devices are connected, the power is shared. Disconnect other devices for faster charging of a single device.
- Check if your device supports fast charging protocols (PD/PPS).
7.3. Przegrzanie
- The charger has built-in protection against overheating. If it feels excessively hot, disconnect it immediately.
- Ensure adequate ventilation around the charger during use. Avoid covering it.
- Jeśli przegrzewanie nadal będzie występować, przerwij używanie urządzenia i skontaktuj się z działem obsługi klienta.
8. Specyfikacje
| Wymiary produktu | 1.5 x 3.5 x 3.5 cala (1.5" gł. x 3.5" szer. x 3.5" wys.) |
| Waga przedmiotu | 13.4 uncji |
| Objętość wyjściatage | 12 wolty |
| Maksymalna moc wyjściowa | 100 W |
| Certyfikaty bezpieczeństwa | CE, FCC, RoHS |
| Kolor | Czarny |
| Producent | SHENZHEN HONOR ELECTRONIC COL TD |
9. Co znajduje się w pudełku
- LKTOP 100W USB-C Power Adapter
- 1 Meter Double C-Port Cable
- 1 Meter AC Power Cord

Obraz 9.1: An illustration showing the contents of the product box: the LKTOP 100W USB-C Power Adapter, a 1-meter double USB-C cable, and a 1-meter AC power cord.
10. Gwarancja i wsparcie
LKTOP products are manufactured to the highest quality standards. For warranty information, technical support, or any inquiries, please refer to the contact information provided on the product packaging or visit the official LKTOP webstrona. Zachowaj dowód zakupu na potrzeby roszczeń gwarancyjnych.