MOBOTIX MX-Q71A-12DN016

Instrukcja obsługi kamery półsferycznej IP MOBOTIX Q71 12MP

Model: MX-Q71A-12DN016

1. Wprowadzenie

This manual provides essential information for the installation, operation, and maintenance of your MOBOTIX Q71 12MP Hemispheric IP Camera. The Q71 is designed for comprehensive indoor and outdoor surveillance, offering a 360° field of view with high-resolution imaging, integrated illumination, and advanced audio capabilities.

2. Informacje dotyczące bezpieczeństwa

Please read all safety instructions carefully before installing and operating the camera. Failure to follow these instructions may result in damage to the product or personal injury.

  • Ensure the power supply meets the camera's specifications.
  • Instalację powinien wykonać wykwalifikowany personel, zgodnie z lokalnymi przepisami elektrycznymi.
  • Do not expose the camera to extreme temperatures outside its specified operating range (-40°C to +65°C).
  • Unikaj bezpośredniej ekspozycji na silne źródła światła, ponieważ mogą one uszkodzić przetwornik obrazu.
  • Nie próbuj demontować ani modyfikować kamery. Spowoduje to unieważnienie gwarancji.

3. Zawartość opakowania

Sprawdź, czy w opakowaniu znajdują się wszystkie elementy:

  • MOBOTIX Q71 12MP Hemispheric IP Camera
  • Instrukcja obsługi
  • Elementy montażowe (śruby, kotwy)
  • 8GB microSD card (pre-installed or included separately)

4. Koniec produktuview

The MOBOTIX Q71 camera features a compact dome design, integrating a high-resolution sensor with a hemispheric lens for wide-area coverage. It includes built-in illumination and audio components.

MOBOTIX Q71 Hemispheric IP Camera, white dome-shaped camera with a central lens and three indicator lights on the top surface, and 'MOBOTIX' logo on the side.

Rycina 4.1: Przód view of the MOBOTIX Q71 camera. This image displays the white, dome-shaped camera unit. Visible are the central hemispheric lens, three small indicator lights on the upper surface, and the MOBOTIX brand name printed on the side.

Główne cechy:

  • 12MP Hemispheric Lens: Zapewnia pole 360° view with 1.6mm focal length and f/1.8 aperture.
  • Wysoka rozdzielczość: Up to 2880×2880 (4K) video capture.
  • Integrated Illumination: IR and white light LEDs for day/night vision, including color night vision.
  • Dwukierunkowy dźwięk: Wbudowany mikrofon i głośnik.
  • Solidna konstrukcja: IP66 and IK10 rated housing for indoor/outdoor use in extreme temperatures (-40°C to +65°C).
  • Pamięć na pokładzie: 8GB microSD card included, expandable up to 1TB.
  • Zaawansowana analityka: Supports video analytics, MxAnalytics, and event recording.
  • Bezproblemowa integracja: Zawodowiecfile S, G, and T support.

5. Konfiguracja

5.1 Fizyczna instalacja

  1. Wybierz miejsce montażu: Select a suitable ceiling or wall location that provides the desired 360° coverage and is within reach of network and power connections.
  2. Montowanie: Use the provided mounting hardware for secure installation. The camera is designed for ceiling mount, utilizing a screw-in installation type. Ensure the mounting surface can support the camera's weight.
  3. Prowadzenie kabli: Route network and power cables through the designated openings in the mounting base to protect them from environmental factors.

5.2 Zasilanie i połączenie sieciowe

  • Moc: Connect the camera to a suitable power source. The camera supports Power over Ethernet (PoE+), simplifying installation by delivering power and data over a single Ethernet cable. Alternatively, a corded electric power supply can be used.
  • Sieć: Connect an Ethernet cable from your network switch or router to the camera's network port. The camera uses a wired connectivity technology and supports RTSP protocol for video streaming.

5.3 Konfiguracja początkowa

  1. Odkrywanie sieci: Use the MOBOTIX MxManagementCenter software or a network scanner to discover the camera's IP address on your network.
  2. Dostęp Web Interfejs: Otwórz web przeglądarka i wprowadź adres IP kamery, aby uzyskać do niej dostęp weboparty na interfejsie konfiguracyjnym.
  3. Login: Enter the default username and password (refer to the camera's quick start guide or MOBOTIX documentation for default credentials). Change default credentials immediately for security.
  4. Podstawowe ustawienia: Configure essential settings such as date/time, network parameters, and user accounts.

6. Obsługa aparatu

6.1 Na żywo View i nagrywanie

  • Wejdź na żywo view through the camera's web interfejs lub kompatybilne oprogramowanie do zarządzania wideo (VMS).
  • Configure recording settings, including continuous recording, event-triggered recording, and schedules. Recordings can be stored on the onboard microSD card or a network-attached storage (NAS).
  • The 360° hemispheric lens provides a wide field of view, which can be de-warped into various perspectives (e.g., panoramic, quad view) using the camera's software or VMS.

6.2 Sterowanie oświetleniem

  • The camera features integrated IR (infrared) and white light LEDs.
  • IR illumination provides discreet night vision up to 40 meters.
  • White light LEDs can be activated for color night vision or as a deterrent.
  • Illumination modes can be configured to activate automatically based on ambient light conditions or manually via the camera interface.

6.3 Funkcje audio

  • Utilize the built-in microphone for audio monitoring of the surveillance area.
  • The integrated speaker enables two-way audio communication, allowing you to speak through the camera from a remote location.
  • Audio settings, including volume and sensitivity, can be adjusted in the camera's web interfejs.

6.4 Advanced Video Analytics

  • The Q71 supports advanced video analytics, including MxAnalytics, for intelligent event detection and reporting.
  • Configure motion detection zones, tripwires, and other event triggers to automate recording and alerts.
  • Event recording can be set up to capture footage only when specific events occur, optimizing storage usage.

7. Konserwacja

7.1 Czyszczenie

  • Regularnie czyść obiektyw i obudowę aparatu miękką, miękką szmatką.amp płótno.
  • Do not use abrasive cleaners or solvents, as these can damage the lens coating or housing material.
  • Przed czyszczeniem upewnij się, że aparat jest wyłączony.

7.2 aktualizacji oprogramowania sprzętowego

  • Periodically check the MOBOTIX webwitryna z najnowszymi aktualizacjami oprogramowania układowego.
  • Firmware updates can provide new features, performance improvements, and security enhancements.
  • Follow the instructions provided with the firmware update package carefully to avoid damaging the camera.

7.3 Względy środowiskowe

  • The camera is designed for robust operation in various conditions, with an IP66 rating for dust and water resistance and an IK10 rating for impact protection.
  • Ensure proper ventilation around the camera if installed in an enclosed space, although its operating temperature range is wide.

8. Rozwiązywanie Problemów

If you encounter issues with your MOBOTIX Q71 camera, refer to the following common problems and solutions:

ProblemMożliwa przyczynaRozwiązanie
Brak obrazu/wideoPower issue, network connectivity issue, incorrect IP address.Check power connection and PoE status. Verify network cable connection. Confirm camera's IP address and network settings.
Niska jakość obrazuDirty lens, insufficient lighting, incorrect camera settings.Clean the lens. Adjust illumination settings (IR/white light). Check resolution and WDR settings in the web interfejs.
Nie można uzyskać dostępu web interfejsNieprawidłowy adres IP, zapora sieciowa, problemy z przeglądarką.Verify IP address. Check network connectivity. Temporarily disable firewall. Try a different web przeglądarka.
Brak dźwiękuMicrophone/speaker disabled, volume too low, software configuration.Check audio settings in the camera's web interface. Ensure microphone and speaker are enabled and volume is adequate.

9. Specyfikacje

FunkcjaSzczegół
Numer modeluMX-Q71A-12DN016
Rozdzielczość przechwytywania wideo12 MP (2880 × 2880)
Obiektyw1.6mm f/1.8 Hemispheric
Pole View360°
Zakres noktowizora40 Meters (IR)
OświetlenieIntegrated IR and White Light LEDs
AudioWbudowany mikrofon i głośnik (dźwięk dwukierunkowy)
WDRDo 120 dB
Technologia łącznościPrzewodowy (Ethernet)
Protokół łącznościRTSP, Profile S, G, T
Źródło zasilaniaCorded Electric, PoE+
Składowanie8GB microSD (included), expandable up to 1TB
Zastosowanie wewnątrz/na zewnątrzWewnątrz, Na zewnątrz
Ochrona środowiskaIP66 (Dust/Water), IK10 (Impact)
Temperatura pracy-40°C do +65°C
Typ montażuCeiling Mount (Screw In)
Wymiary produktu6.46 x 1.87 x 6.46 cala
ProducentMobotix

10. Gwarancja i wsparcie

10.1 Informacje o gwarancji

For detailed warranty information, please refer to the warranty card included with your product or visit the official MOBOTIX webGwarancja zazwyczaj obejmuje wady produkcyjne przez określony czas od daty zakupu.

10.2 Wsparcie techniczne

If you require technical assistance or have questions not covered in this manual, please contact MOBOTIX customer support or your authorized dealer. Support resources, including FAQs, software downloads, and contact details, are available on the official MOBOTIX webstrona.

Proszę zachować paragon zakupu na wypadek reklamacji.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.