Instrukcja obsługi drewnianej układanki 3D ROBOTIME Seahorse Barque MCB02

Wstęp

Thank you for choosing the ROBOTIME Seahorse Barque MCB02 3D Wooden Puzzle. This kit allows you to construct a detailed 1:100 scale model of a classic three-masted sailing ship. Designed for adults and older children, this puzzle provides an engaging and rewarding building experience. Please read these instructions carefully before beginning assembly to ensure a smooth and enjoyable process.

Informacje dotyczące bezpieczeństwa

Ostrzeżenie: Produkt nieodpowiedni dla dzieci poniżej 3 lat ze względu na małe części, które mogą stwarzać ryzyko zadławienia.

• Keep all parts out of reach of small children.
• Exercise caution when detaching pieces from the wooden sheets to avoid splinters or breakage.
• Materiały opakowaniowe należy utylizować w sposób odpowiedzialny.

Zawartość opakowania

Your ROBOTIME Seahorse Barque MCB02 kit includes:

• 603 wooden puzzle pieces (on laser-cut sheets)
• Instrukcja montażu
• Additional components (e.g., screws, fabric sails, etc., as required for the model)

Image: Layout of laser-cut wooden puzzle sheets and various components for the Seahorse Barque MCB02 kit.

Instrukcja montażu

Assembly of the Seahorse Barque MCB02 typically takes approximately 10 hours. Follow the detailed step-by-step instructions provided in the included manual. Here are some general tips:

1. Przygotowanie: Lay out all wooden sheets and identify the parts. Refer to the manual for part numbers. Work on a clean, well-lit surface.
2. Detaching Pieces: Carefully detach each piece from its wooden sheet. If a piece is difficult to remove, use a craft knife or sandpaper to gently loosen it. Detach pieces by pushing them out from the side opposite any printed markings to minimize visible damage.
3. Szlifowanie: Lightly sand the edges of detached pieces if necessary to ensure a smooth fit and remove any small burrs from the laser cutting.
4. Postępuj zgodnie z instrukcją: The included manual provides detailed diagrams and instructions for each step. Pay close attention to the orientation of pieces and the order of assembly.
5. Elementy łączące: Pieces are designed to fit together snugly. Apply gentle, even pressure. If a connection is too tight, do not force it; instead, lightly sand the edges of the connecting tabs.
6. Sails and Rigging: The kit includes 13 sails (8 square and 5 triangular) and rigging components. Follow the manual for proper attachment and tensioning to achieve the authentic look of a sailing ship.
7. Elementy dekoracyjne: The model features 26 golden decorative elements and a golden seahorse figurehead. Attach these as indicated in the manual to enhance the ship's appearance.

Image: Hands assembling wooden puzzle pieces on a table with the instruction manual open.

Operating Instructions (Display)

Once assembled, your ROBOTIME Seahorse Barque MCB02 is a static display model. It features a rotating rudder and adjustable sails for dynamic posing. Place it on a stable, flat surface away from direct sunlight and excessive humidity to preserve its wooden components.

Image: The fully assembled ROBOTIME Seahorse Barque MCB02 3D wooden puzzle model.

Pielęgnacja i konserwacja

• Czyszczenie: Regularnie odkurzaj model miękką, suchą ściereczką lub miękką szczotką. Unikaj stosowania wody i chemicznych środków czyszczących, ponieważ mogą one uszkodzić drewno.
• Środowisko: Keep the model in a stable environment, avoiding extreme temperature changes or high humidity, which can cause the wood to warp or crack.
• Obsługiwanie: Handle the model with care, especially delicate parts like the rigging and sails.

Porady dotyczące rozwiązywania problemów

• Pieces don't fit: If pieces are too tight, gently sand the connecting tabs. If too loose, a small amount of wood glue can be used (not included).
• Połamane kawałki: In case of minor breakage, wood glue can often repair the piece. If a critical piece is severely damaged, contact customer support for possible replacements.
• Brakujące części: Double-check all wooden sheets and packaging. If a piece is genuinely missing, contact customer support.

Specyfikacje

Gwarancja i wsparcie

Ten produkt jest dostarczany z 2-letnia gwarancja producenta. For any questions, missing parts, or support needs, please contact ROBOTIME customer service through their official channels or the retailer where the product was purchased.

Więcej informacji znajdziesz w oficjalnym sklepie ROBOTIME: Sklep ROBOTIME